PAUTIX 5V USB CCT Tunable COB LED Strip Light Instruction Manual

1. Introducció

Thank you for choosing the PAUTIX 5V USB CCT Tunable COB LED Strip Light. This manual provides essential information for the safe and effective use of your new LED strip light. Please read these instructions carefully before installation and operation, and retain them for future reference.

Què hi ha a la caixa:

• Tira de llum LED COB
• Comandament a distància RF

2. Informació de seguretat

• Ensure the power source is 5V DC and provides at least 2A. Using an insufficient power supply may cause the strip to flicker or not function correctly.
• Aquest producte està dissenyat només per a ús en interiors. No l'exposeu a l'aigua ni a una humitat elevada.
• No doblegueu la tira LED bruscament ni apliqueu una força excessiva, ja que això podria danyar els circuits interns.
• Mantenir fora de l'abast dels nens.
• No cobriu la tira LED amb materials que puguin impedir la dissipació de calor durant el funcionament.
• Only cut the LED strip at designated cutting marks.

3. Característiques del producte

• CCT Tunable White: Adjust color temperature from 2700K (warm white) to 6500K (cool white).
• Brillantor regulable: 10-level brightness adjustment with stepless dimming via controller buttons.
• Control remot RF: Control the light strip from up to 15 meters away without direct line of sight.
• Funció de memòria: The strip light restores to its last brightness and color temperature settings upon power restoration.
• Alimentat per USB: Compatible with any 5V/2A (or higher) USB power source (e.g., TV, computer, power bank).
• CRI alt: Color Rendering Index (CRI) of 85+ ensures accurate color representation.
• Fàcil instal·lació: Features authentic 3M self-adhesive backing for secure mounting.
• Llarga vida útil: Designed for over 50,000 hours of operation.

4. Configuració i instal·lació

Segueix aquests passos per a una instal·lació correcta de la teva tira de llums LED:

1. Prepara la superfície: Ensure the mounting surface is clean, dry, and smooth. Use a clean cloth to wipe away any dust or debris.
2. Mesurar i tallar (opcional): If necessary, measure the desired length and cut the LED strip only at the designated cutting marks (indicated by copper pads and a scissor icon). Cutting at other points will damage the strip.
3. Aplicar la tira: Peel off the protective film from the 3M adhesive backing. Carefully press the LED strip onto the prepared surface, ensuring firm contact along its entire length.
4. Connectar l'alimentació: Plug the USB connector into a 5V/2A (or higher) USB power source. Common sources include TV USB ports, computer USB ports, power banks, or a 5V USB wall adapter.
5. Encès: Once connected, the strip light is ready for operation.

Figura 4.1: Passos fàcils d'instal·lació

Figure 4.2: Compatible 5V USB Power Sources

Figure 4.3: Designated Cutting Points on the LED Strip

5. Instruccions de funcionament

The PAUTIX LED strip light can be controlled using the included RF remote control or the inline button controller.

RF Remote Control Functions:

Figura 5.1: Producte al llarg deview with RF Remote

Figure 5.2: RF Remote Control Functionality

• ON/OFF: Press the red button to turn the light on or off.
• Ajust de brillantor: Use the '+' and '-' buttons to increase or decrease brightness (10 levels).
• Preajustos de temperatura de color: Select from preset color temperatures (e.g., 2700K, 4000K, 6500K) using the dedicated buttons.
• Stepless CCT Adjustment: Use the yellow up/down arrows to fine-tune the color temperature between 2700K and 6500K.
• Funció de temporitzador: Set the light to turn off after 30 minutes, 1 hour, 2 hours, or 4 hours using the timer buttons.

The RF remote operates without requiring direct line of sight, allowing control from various angles and distances up to 15 meters.

Figure 5.3: RF Remote 360-Degree Control

Inline Button Controller:

The inline controller on the USB cable also provides basic control:

• Long press the '+' and '-' buttons for stepless dimming (0-100%).
• Short press the buttons to cycle through preset brightness levels or color temperatures.

Figure 5.4: 0-100% Dimmable Functionality

Funció de memòria:

The light strip retains its last brightness and color temperature settings even after being powered off and on again.

Figure 5.5: Memory Function in Use

6. Manteniment

• Neteja: Gently wipe the LED strip with a soft, dry cloth to remove dust. Do not use liquid cleaners or abrasive materials.
• Manipulació: Avoid pulling or twisting the strip excessively. Ensure the adhesive remains secure.
• Emmagatzematge: If storing the strip, ensure it is coiled loosely and kept in a dry, cool place away from direct sunlight.

7. Solució De Problemes

• Light strip is not turning on:
  • Check if the USB power source is properly connected and functioning.
  • Ensure the USB power source provides at least 5V/2A.
  • Verifiqueu que la pila del comandament a distància no estigui esgotada.
• Light strip is flickering:
  • This often indicates an insufficient power supply. Ensure your USB device outputs 5V/2A or higher.
  • Comproveu si hi ha connexions soltes.
• El comandament a distància no respon:
  • Substituïu la pila del comandament a distància RF.
  • Ensure there are no major obstructions blocking the RF signal, although the remote is designed for 360-degree control.
• Light color or brightness is inconsistent:
  • Ensure the strip is not bent too sharply, which can damage internal components.
  • Check for any physical damage to the strip.

8. Especificacions

9. Garantia i Suport

For warranty information or technical support, please contact PAUTIX customer service through the retailer where the product was purchased or visit the official PAUTIX website. Please have your model number (RFCCT-S640COB-USB-2M) and purchase details ready.