IKEA BROGRUND Wash-basin Mixer Tap with Sensor 604.233.51 User Manual

1. Introducció

Thank you for choosing the IKEA BROGRUND wash-basin mixer tap with sensor. This tap is designed for convenience and hygiene, providing water automatically when hands are detected. The integrated aerator helps maintain an optimal water flow while conserving water. This manual provides essential information for the safe installation, operation, and maintenance of your new tap.

Image 1.1: The IKEA BROGRUND wash-basin mixer tap with sensor, featuring a sleek chrome finish.

2. Informació de seguretat

Please read all safety instructions carefully before installation and use. Failure to follow these instructions may result in injury or damage to the product.

• Instal·lació professional recomanada: Installation of plumbing fixtures can be complex. If you are unsure, consult a qualified professional plumber to ensure proper installation according to local building and plumbing regulations.
• Subministrament d'aigua: Assegureu-vos que el subministrament principal d'aigua estigui tancat abans de començar qualsevol treball d'instal·lació o manteniment.
• Electrical Safety (Batteries): This product uses batteries. Ensure correct polarity when inserting batteries. Do not mix old and new batteries, or different types of batteries. Dispose of used batteries responsibly according to local regulations.
• Temperatura màxima d'aigua calenta: The maximum recommended hot water temperature for this tap is 80°C (176°F). Exceeding this temperature may damage the product or cause scalding.
• Neteja: Use only mild cleaning agents and soft cloths. Abrasive cleaners or scouring pads can damage the chrome finish.

3. Contingut del paquet

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Renta-b BROGRUNDasin Aixeta mescladora amb sensor
• Eina d'instal·lació
• Connection Hose (1/2 inch, 50 cm length)
• 4 x LR6 AA 1.5V Alkaline Batteries
• Manual d'usuari (aquest document)

4. Configuració i instal·lació

This product requires assembly. Follow the steps below for proper installation.

4.1 Comprovacions prèvies a la instal·lació

• Ensure the main water supply to the wash-basin està apagat.
• Confirm that your wash-basin is compatible. This tap is designed to fit IKEA wash-basins and other standard wash-basins.
• Gather necessary tools (an installation tool is included, but additional plumbing tools may be required).

4.2 Instal·lació de la bateria

1. Locate the battery compartment, typically found near the base of the tap or in a separate unit connected by a cable.
2. Obriu la coberta del compartiment.
3. Insert the 4 x LR6 AA 1.5V alkaline batteries, ensuring correct polarity (+/-).
4. Tanqueu bé la tapa del compartiment de la bateria.

Instal·lació amb 4.3 toc

1. Mount the mixer tap onto the wash-basin using the provided installation tool and hardware.
2. Connect the included 1/2 inch (approx. 13mm) connection hose to the water supply lines. The hose length is 50 cm.
3. Assegureu-vos que totes les connexions estiguin ajustades per evitar fuites.
4. Once installed, slowly turn on the main water supply and check for any leaks.

Important: Always adhere to local building and plumbing standards during installation. If you encounter any difficulties, please consult a professional.

5. Instruccions de funcionament

5.1 Automatic Water Flow

The BROGRUND tap features a sensor for automatic water activation.

• To activate water flow, simply place your hands or an object in front of the sensor located on the tap.
• L'aigua fluirà automàticament.
• To stop the water flow, remove your hands or the object from the sensor's range. The water will stop automatically after approximately 2 seconds.

5.2 Ajust de la temperatura de l'aigua

The water temperature can be adjusted using the lever located on the side of the mixer tap.

• Move the lever to the left for hotter water.
• Move the lever to the right for colder water.
• The tap will dispense water at the pre-set temperature when activated by the sensor.

6. Manteniment

6.1 Neteja

To maintain the chrome finish and ensure proper sensor function:

• Clean the tap regularly with a soft cloth dampesbandit amb aigua o una solució de neteja suau i no abrasiva.
• Avoid using abrasive sponges, scouring pads, or cleaners containing acids, alcohol, or ammonia, as these can damage the surface.
• Wipe the sensor area clean to ensure unobstructed operation.

6.2 Substitució de la bateria

When the tap's sensor functionality becomes inconsistent or stops working, it may be time to replace the batteries.

1. Tanqueu el subministrament d'aigua a l'aixeta.
2. Locate and open the battery compartment (refer to Section 4.2).
3. Traieu les piles velles i elimineu-les correctament.
4. Insert four new LR6 AA 1.5V alkaline batteries, observing correct polarity.
5. Tanqueu la coberta del compartiment de manera segura.
6. Torneu a encendre el subministrament d'aigua.

Replacement alkaline batteries are widely available at most retail stores.

7. Solució De Problemes

If you experience issues with your BROGRUND tap, refer to the table below for common problems and solutions.

8. Especificacions

9. Garantia i Suport

IKEA is committed to providing high-quality products. To ensure the longevity of your product, spare parts are available.

• For information on spare parts, please contact your nearest IKEA store's customer service or visit the IKEA online store at www.IKEA.com.
• For any questions regarding installation or product functionality not covered in this manual, please contact IKEA customer support or consult a qualified professional.