Informació important de seguretat
Please read this manual thoroughly before using the device. Keep this manual for future reference.
- Do not use on damaged, inflamed, or broken skin.
- Avoid using on areas with skin conditions such as eczema, psoriasis, or severe acne.
- Do not stay in one area for too long (more than 3 seconds) to prevent skin bruising or redness.
- Mantenir fora de l'abast dels nens.
- This device is not waterproof. Do not immerse in water or rinse directly under a tap.
- Utilitzeu només el cable de càrrega subministrat.
- Consult a dermatologist if you have sensitive skin or pre-existing skin conditions.
Producte acabatview
The Dioche Microbubble Water Cycle Blackhead Remover is designed to deeply cleanse pores using a water circulation system and gentle suction. It helps remove blackheads, excess oil, and impurities, leaving skin feeling refreshed.
Figure 1: The Dioche Microbubble Blackhead Remover, showing the main unit, multiple interchangeable suction heads, and the USB charging cable.
Components:
- Unitat principal: Contains the motor, water tanks, control panel, and power button.
- Suction Heads: Various shapes and sizes for different skin areas and needs.
- Dipòsit d'aigua neta: For filling with purified water or a suitable solution.
- Waste Water Tank: Collects the used water and extracted impurities.
- Cable de càrrega USB: Per recarregar la bateria interna del dispositiu.
Figura 2: Un front directe view of the device, highlighting the digital display and the central power button. The display shows battery level and mode indicators.
Configuració
- Carregueu el dispositiu: Before first use, fully charge the device using the provided USB cable. Connect the cable to the charging port on the device and a suitable USB power adapter (not included). The battery indicator on the display will show charging status.
- Ompliu el dipòsit d'aigua neta: Unscrew the clean water tank from the bottom of the device. Fill it with purified water or a non-foaming, non-irritating skin solution suitable for pore cleansing. Do not overfill. Reattach the tank securely.
- Attach a Suction Head: Select the appropriate suction head for your needs. Gently push it onto the nozzle at the top of the device until it clicks into place.
- Prepara la teva pell: For best results, open your pores by steaming your face or applying a warm towel for 5-10 minutes before use. Ensure your face is clean and dry.
Figura 3: Un angle view of the device, illustrating the transparent clean water tank at the bottom, ready for filling.
Instruccions de funcionament
- Encès: Press and hold the power button (located below the display) for 2-3 seconds to turn on the device. The display will light up.
- Seleccioneu el mode: Briefly press the power button to cycle through the different suction modes/intensities. The display will indicate the current mode (e.g., "Oily Skin", "Normal Skin", "Dry Skin"). Choose the mode suitable for your skin type. Start with the lowest intensity if you are new to pore vacuums.
- Iniciar el tractament: Gently place the suction head flat against your skin. Move the device slowly and continuously across the desired area. Do not hold it in one spot for more than 3 seconds to avoid bruising. The device will simultaneously apply suction and release a fine mist of water to aid in cleansing.
- Àrees objectiu: Focus on areas prone to blackheads and clogged pores, such as the T-zone (forehead, nose, chin).
- Monitor Waste Water Tank: Observe the waste water tank as it fills with impurities.
- Apagar: After use, press and hold the power button for 2-3 seconds to turn off the device.
Figure 4: An illustrative diagram demonstrating how the microbubble water cycle technology works to cleanse pores, showing water being circulated and impurities being removed from the skin.
Manteniment
- Empty and Clean Tanks: After each use, unscrew and empty both the clean water tank and the waste water tank. Rinse them thoroughly with clean water. Allow them to air dry completely before reassembling.
- Clean Suction Heads: Remove the suction head and rinse it under running water. You can use a small brush (not included) to clean any residue inside. Ensure it is dry before storing.
- Neteja la unitat principal: Netegeu la unitat principal amb un suau, damp drap. No utilitzeu productes de neteja abrasius ni submergiu la unitat en aigua.
- Emmagatzematge: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. Keep it in its original packaging or a protective case to prevent damage.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| El dispositiu no s’encén. | Bateria baixa. | Carregueu el dispositiu completament. |
| Sense succió o succió feble. | Suction head not properly attached; water tank empty; clogged nozzle. | Ensure suction head is securely attached. Refill clean water tank. Clean the nozzle and suction head. |
| Fuga d'aigua. | Water tanks not securely attached; tank seal damaged. | Ensure both clean and waste water tanks are screwed on tightly. Check tank seals for damage. |
| Skin redness or bruising. | Suction intensity too high; device held in one spot for too long. | Reduce suction intensity. Keep the device moving constantly; do not hold in one area for more than 3 seconds. |
Especificacions
- Marca: Dioque
- Número de model: Diochewkrbz03ai914346
- ASIN: B0B3Y5FGSY
- Dimensions del paquet: 25 x 10 x 5 cm (aproximadament 9.8 x 3.9 x 2 polzades)
- Pes de l'article: 272 grams (aproximadament 0.6 lliures)
- Font d'alimentació: Bateria recarregable (via USB)
- Funció: Microbubble Water Cycle Pore Cleansing, Blackhead Removal
Garantia i Suport
This product comes with a standard manufacturer's warranty. For detailed warranty information, technical support, or service inquiries, please refer to the warranty card included with your purchase or contact the seller directly through the platform where you purchased the product.
For further assistance, you may also visit the official Dioche store on Amazon: Dioche Amazon Store