DAKASON 4FT Linkable LED Linear Light User Manual

1. Producte acabatview

The DAKASON 4FT Linkable LED Linear Light is a commercial-grade lighting fixture designed for various indoor applications such as offices, workshops, garages, schools, and markets. It features both direct (down) and indirect (up) lighting components, offering versatile illumination options. The fixture is energy-efficient, color temperature selectable, and dimmable, providing adaptable lighting solutions for different environments.

Figura 1.1: Mésview of DAKASON 4FT Linkable LED Linear Lights installed.

Característiques principals:

• Direct and Indirect Lighting: Provides 35W downlight for focused illumination and 15W uplight for ambient lighting, reducing eye fatigue.
• Eficiència energètica: Utilizes high-efficient SMD2835 LEDs, delivering 5000 lumens with only 50W total power consumption, replacing 150W fluorescent tubes.
• Temperatura de color ajustable (CCT): Offers 3000K (Warm White), 4000K (Neutral White), and 5000K (Daylight White) options, selectable via a switch before installation.
• Disseny enllaçable: Allows seamless continuous runs of up to 7 lights, providing uniform architectural lighting.
• Regulable de 0-10V: Compatible with 0-10V dimmers (not included) for smooth brightness control from 0% to 100% without flickering or buzzing.
• Construcció duradora: Features a frosted downlight lens for soft, even light distribution and a die-cast aluminum housing for efficient heat dissipation.
• Muntatge de suspensió: Includes all necessary accessories for suspension mounting, with an adjustable hanging height from 5 inches to 6.5 feet.

2. Informació de seguretat

Please read and understand all instructions before installing or operating this fixture. Failure to follow these instructions may result in electric shock, fire, or other hazards that could cause personal injury or property damage.

• ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
• ADVERTIMENT: Risc d'incendi. Utilitzeu-lo només amb el volum especificat.tage i wattage.
• La instal·lació ha de ser realitzada per un electricista qualificat d'acord amb tots els codis elèctrics nacionals i locals.
• Assegureu-vos el subministrament voltage is correct for the fixture (AC100-277V).
• Do not install near heat sources or in areas with excessive moisture.
• No mireu directament a la font de llum LED quan el dispositiu estigui encès.
• Handle the fixture with care to avoid damage to components.
• Mantingueu els materials d'embalatge lluny dels nens.

3. Contingut del paquet

Verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact DAKASON customer support.

• DAKASON 4FT Linkable LED Linear Light Fixture (Quantity: 4 for 4-pack)
• Suspension Cables (Adjustable, typically 2 per fixture)
• Ceiling Mount Hardware (Screws, anchors, T-bolts, clips)
• Linking Connectors (for continuous runs)
• Manual d'instruccions

Figure 3.1: Included accessories for installation.

4. Especificacions

Figure 4.1: Internal components and construction details.

5. Configuració i instal·lació

This fixture is designed for suspension mounting. Ensure the mounting surface can support the weight of the fixture(s) and that all electrical connections are made safely.

5.1 Tools Required (Not Included):

• Trepant
• Tornavís (Phillips i Flathead)
• Pelafils
• Cinta mètrica
• Llapis
• Ulleres de seguretat

5.2 Passos d'instal·lació:

1. Desconnexió d'alimentació: Apagueu l'alimentació a l'interruptor abans de començar la instal·lació.
2. Marking Mounting Points: Determine the desired location for the fixture(s). Use a pencil to mark the ceiling for the suspension cable anchors. For multiple linked fixtures, ensure proper spacing.
3. Install Ceiling Anchors: Drill pilot holes at the marked points and insert appropriate ceiling anchors. Secure the ceiling mount hardware.
4. Attach Suspension Cables: Attach the suspension cables to the ceiling mount hardware. The cable length is adjustable up to 79 inches (approx. 6.5 ft).
   

   Figure 5.1: Suspension hardware and adjustable cable length.

   

   Figure 5.2: Detail of the adjustable suspension cable mechanism.

5. Pengeu l'aparell: Carefully attach the linear light fixture to the suspension cables. Adjust the cable length to achieve the desired hanging height.
6. Cablejat elèctric: Connect the fixture's wiring to the main power supply. This fixture is designed for hardwiring. Follow standard electrical codes for connecting Live, Neutral, and Ground wires. If using 0-10V dimming, connect the purple (DIM+) and gray (DIM-) wires to the compatible dimmer.
7. Linking Multiple Fixtures (Optional): If installing multiple fixtures in a continuous run, use the provided linking connectors. Ensure power is disconnected before linking. Connect the fixtures mechanically using the linking plates and electrically using the internal wiring connectors.
   

   Figure 5.3: Steps for linking multiple fixtures.
8. Restaura l'alimentació: Once all connections are secure and the fixture(s) are properly mounted, restore power at the circuit breaker.

6. Instruccions de funcionament

6.1 Color Temperature Selection (CCT)

The DAKASON Linear Light allows you to select from three color temperatures: 3000K, 4000K, or 5000K. This selection must be made abans de la instal·lació by accessing the switch located on the fixture.

1. Locate the CCT selection switch on the side of the fixture.
2. Use a small tool (e.g., screwdriver) to slide the switch to your desired color temperature: 'W' for 3000K, 'CW' for 4000K, or 'C' for 5000K.
3. Ensure the switch is firmly set in the chosen position.

Figure 6.1: CCT selection switch and corresponding light outputs.

6.2 Funcionalitat de regulació de la intensitat

This fixture is compatible with 0-10V dimmers (not included). To utilize the dimming feature, ensure your electrical system includes a compatible 0-10V dimmer switch and that the fixture's dimming wires (purple and gray) are correctly connected during installation.

• Once installed with a 0-10V dimmer, use the dimmer switch to adjust the brightness from 0% to 100%.
• The fixture is designed for smooth dimming without flickering or buzzing.

Figure 6.2: DAKASON linear lights operating with 0-10V dimming in an office environment.

6.3 Direct and Indirect Light Output

The fixture provides both downward and upward light distribution. The 35W downlight offers primary illumination, while the 15W uplight contributes to ambient lighting and helps reduce harsh shadows and glare, creating a more comfortable visual environment.

Figure 6.3: Detail of up and down light distribution.

7. Manteniment

The DAKASON LED Linear Light is designed for long-term, low-maintenance operation. Regular cleaning and inspection will help ensure optimal performance and lifespan.

• Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau, sec o lleugerament sec.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners, solvents, or cleaners containing ammonia, as these may damage the finish or electrical components.
• Inspecció: Periodically inspect the suspension cables and mounting hardware for any signs of wear, loosening, or damage. Ensure all electrical connections remain secure.
• LED: La font de llum LED està integrada i no la pot substituir l'usuari. El llum té una vida útil nominal de 50,000 hores.

8. Solució De Problemes

If you experience issues with your DAKASON LED Linear Light, refer to the following troubleshooting guide. If the problem persists, contact DAKASON customer support.

9. Informació de la garantia

The DAKASON 4FT Linkable LED Linear Light comes with a Garantia limitada d'5 any des de la data de compra. Aquesta garantia cobreix els defectes de materials i de fabricació en condicions d'ús i manteniment normals.

La garantia no cobreix:

• Danys causats per una instal·lació o un funcionament incorrectes.
• Danys causats per reparacions o modificacions no autoritzades.
• Damage caused by accidents, abuse, misuse, or natural disasters.
• Desgast normal.

To make a warranty claim, please retain your proof of purchase and contact DAKASON customer support.

10. Atenció al client

For technical assistance, troubleshooting not covered in this manual, or warranty inquiries, please contact DAKASON customer support through the retailer where the product was purchased or visit the official DAKASON weblloc per obtenir informació de contacte.

Please have your model number (DKS-WL-3LSUD4FT50WBDUV) and proof of purchase ready when contacting support.