1. Introducció
The Genmitsu Laser Rotary V2 is an advanced accessory designed to expand the capabilities of your laser engraver or cutter. This module enables precise engraving on cylindrical objects, such as tumblers, wine glasses, pens, and more, by providing controlled rotation during the engraving process.
Key features include tool-free roller distance adjustment for easy setup, high-quality machined rollers with polyurethane coating for improved grip and accuracy, and broad compatibility with various laser engraver models.
Figure 1: The Genmitsu Laser Rotary V2 shown with various cylindrical items it can engrave, including a tumbler, can, wine glass, and mug.
2. Informació de seguretat
Always prioritize safety when operating laser equipment and accessories. This rotary module works in conjunction with a laser engraver, which emits concentrated laser radiation that can cause serious injury or damage if not handled properly.
- Protecció ocular: Always wear appropriate laser safety glasses that are rated for the wavelength of your laser during operation.
- Ventilació: Ensure adequate ventilation in your workspace to dissipate fumes and smoke produced during engraving.
- Materials inflamables: Mantingueu els materials inflamables allunyats de la trajectòria del làser.
- Supervisió: Never leave the laser engraver and rotary module unattended during operation.
- Apagar: Disconnect power to both the laser engraver and the rotary module before performing any maintenance or adjustments.
- Refer to your primary laser engraver's user manual for comprehensive safety guidelines specific to your machine.
3. Contingut del paquet
Verifiqueu que tots els components siguin presents al vostre paquet:
- Genmitsu Laser Rotary V2 Module
- PH2.0-6P (6 PIN) to XH2.54-4P (4 PIN) Connection Wire
- Y-brace Roller (for supporting stemmed objects like wine glasses)
- Manual d'usuari
Figure 2: The Genmitsu Laser Rotary V2 as it appears in its protective packaging, ready for unboxing.
4. Configuració
The Genmitsu Rotary Roller V2 is designed for easy, tool-free setup.
4.1 Instal·lació física
- Place the rotary module on a stable, flat surface beneath your laser engraver's working area.
- Adjust the roller distance to accommodate the diameter of the object you intend to engrave. This can be done without tools by sliding the adjustable end of the rotary. The adjustable range is from 19mm to 76mm, with 16 distinct positions.
- For stemmed objects like wine glasses, attach the Y-brace roller to provide additional support and stability.
Figure 3: A diagram illustrating the supported cylinder length (10mm-195mm) and diameter (5mm-160mm), along with the adjustable roller distances (19mm-76mm) of the rotary module.
4.2 Connexió elèctrica
Connect the rotary module to your laser engraver using the provided wire. The rotary module features a PH2.0-6P (6 PIN) port, which connects to the XH2.54-4P (4 PIN) port on your laser engraver. Ensure the correct cable is used for your specific machine model.
The Genmitsu Rotary Roller V2 is compatible with most laser engravers and laser cutters on the market, including Genmitsu 3018-Pro, 3018-Prover, 3020-Pro Max, 4040-PRO, 4040 Reno, Jinsoku LC-50 PLUS, LC-60A, LE-1620, and LE-5040 Laser Engravers. For non-Genmitsu machines, verify the port on your machine first. If you are unsure, contact Genmitsu support.
Figure 4: The Genmitsu Laser Rotary V2 displayed alongside several compatible Genmitsu laser engraver models, highlighting its broad machine compatibility.
4.3 Configuració del programari
After physical connection, you will need to configure your laser engraving software (e.g., LaserGRBL, LightBurn) to recognize and control the rotary axis. This typically involves enabling the rotary axis function and setting the correct steps per millimeter for rotation. Consult your software's documentation for detailed instructions on rotary axis setup.
5. Instruccions de funcionament
5.1 Material Placement
Carefully place the cylindrical object onto the rollers. Ensure it sits securely and is centered. The polyurethane coating on the rollers provides an improved grip, minimizing slipping during engraving. The rotary supports material diameters from 5mm to 160mm and lengths from 10mm to 195mm.
Figura 5: Un primer pla view of the stainless steel rollers with their polyurethane finish, designed for enhanced grip and consistent rotation.
5.2 Procés de gravat
- Once the object is securely placed and the software is configured, load your engraving design.
- Perform a test run or frame the engraving area to ensure correct positioning and alignment.
- Initiate the engraving process from your laser software. The rotary module will precisely rotate the object as the laser engraves, creating a seamless design around the cylindrical surface.
Figure 6: The Genmitsu Laser Rotary V2 in operation, precisely rotating a wine glass as a laser engraver applies a design.
Figure 7: The Genmitsu Laser Rotary V2 actively engraving a wooden cylindrical object, demonstrating its versatility for various materials.
6. Manteniment
Regular maintenance ensures the longevity and optimal performance of your Genmitsu Laser Rotary V2.
- Neteja: Periodically clean the rollers and the module's frame to remove dust, debris, and engraving residue. Use a soft, dry cloth. Avoid abrasive cleaners that could damage the polyurethane coating.
- Inspecció: Inspect the rollers and belts for any signs of wear or damage. Ensure the rollers spin freely and the belt tension is appropriate.
- Emmagatzematge: When not in use, store the rotary module in a clean, dry environment to prevent dust accumulation and potential damage.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Rotary not moving or making strange noises | Incorrect connection cable; Loose cable connection; Incorrect software settings (e.g., steps per mm) |
|
| Engraving is distorted or misaligned | Object slipping on rollers; Incorrect roller distance; Software calibration issues |
|
| Rotary module not recognized by laser engraver | Improper connection; Incompatible port |
|
8. Especificacions
| Característica | Detall |
|---|---|
| Número de model | 555082075 |
| Material | Alumini |
| Pes de l'article | 2.38 lliures (aprox. 1.08 kg) |
| Dimensions del producte | 10.63 x 5.91 x 2.76 polzades (aprox. 27 x 15 x 7 cm) |
| Supported Material Diameter | 5 mm - 160 mm |
| Supported Material Length | 10 mm - 195 mm |
| Adjustable Roller Distance | 19mm - 76mm (16 different positions) |
| Port de connexió | PH2.0-6P (6 PIN) |
| Màquines compatibles | Genmitsu 3018-Pro, 3018-Prover, 3020-Pro Max, 4040-PRO, 4040 Reno, Jinsoku LC-50 PLUS, LC-60A, LE-1620, LE-5040, and most other laser engravers/cutters. |
9. Garantia i Suport
9.1 Informació de la garantia
The Genmitsu Laser Rotary V2 comes with a one-year manufacturer's warranty from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.
9.2 Atenció al client
For technical assistance, troubleshooting, or any questions regarding your Genmitsu Laser Rotary V2, please do not hesitate to reach out to our dedicated support team. Contact information can typically be found on the Genmitsu official weblloc web o a través de la vostra plataforma de compra.
