EASYGUARD ECC001 Universal Electric Cruise Control System Instruction Manual

1. Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of the EASYGUARD ECC001 Universal Electric Cruise Control System. This system is designed to enhance driving comfort and efficiency in compatible vehicles.

Nota important: This cruise control system is specifically designed for DC12V vehicles equipped with a 6-wire electric throttle connector. This includes both manual and automatic transmission vehicles, as well as diesel or petrol engine types. Professional installation by a qualified car audio installer is strongly recommended to prevent potential damage to the vehicle or the product components. Prior to purchase, it is advisable to verify your vehicle's throttle wire function.

Característiques principals:

• Fixed speed cruise function for maintaining a set vehicle speed.
• Speed limit function to prevent exceeding a predefined speed.
• Electronic throttle output control.
• Fuel consumption reminder and average fuel consumption display.
• Digital speedometer function.
• Fatigue reminder for long journeys.
• Brake circuit fault detection tips.

2. Components del producte

The EASYGUARD ECC001 system includes the following components:

• Mòdul de control
• Digital Display (D Display)
• Oil Throttle (Electronic Throttle Connector)
• Switch Handle (Cruise Control Lever)
• Arnès de cablejat
• 8mm Drill Bit & Screws
• Binding Wire (Cable Ties)

Figura 2.1: Acabatview of all components included in the EASYGUARD ECC001 kit. This image displays the control module, digital display, cruise control handle, various wiring harnesses, and installation accessories.

Figura 2.2: The cruise control switch handle, used for activating, deactivating, setting, and adjusting the cruise control speed and limit functions.

Figura 2.3: The digital display unit, which shows speed, fuel consumption, and other operational data. The display reads "000 ECON" when not active or showing specific data.

3. Configuració i instal·lació

Avís: Installation of this product requires technical knowledge and experience with automotive electrical systems. Incorrect installation can lead to vehicle damage or system malfunction. It is highly recommended that installation be performed by a professional car audio installer.

3.1 Llista de comprovació prèvia a la instal·lació

• Ensure the vehicle is a DC12V system.
• Confirm the vehicle has a 6-wire electric throttle connector.
• Disconnect the vehicle's battery before starting any wiring.
• Read the entire wiring diagram carefully before beginning installation.
• Connect all ground (GND) wires first during wiring connections.

3.2 Connexions de cablejat

Carefully follow the wiring instructions below. Refer to the provided images for visual guidance.

Figura 3.1: Main wire harness detailing the programming connector and the optional clutch wire. The pink wire connects to the foot brake wire, and the blue wire connects to the foot brake switch constant 12V wire.

Figura 3.2: Main wire harness showing connections for power and speed signals. The red wire connects to a constant 12V source, and the yellow-white wire connects to the car speed or gearbox signal wire.

Figura 3.3: Universal Throttle Connector wiring diagram. It is crucial to test your vehicle's throttle connector to ensure compatibility and correct wiring. The diagram illustrates connections for orange/white, red, green, brown/white, and green/white wires.

Detailed Throttle Connector Wiring Method:

• Fil vermell: Connect with any of the 5V wire from the throttle connector.
• Brown/white wire: Connect to the chassis ground (0V).
• Orange and Orange/white wires: These form a group wire. Connect with the 1st signal wires. Cut the 1st signal wire in half, then connect the accelerator pedal or gas pedal terminal to the orange wire, and the wire harness terminal to the orange/white wire.
• Green and Green/white wires: These form a group wire. Connect with the 2nd signal wires. Cut the 2nd signal wire in half, then connect the accelerator pedal or gas pedal terminal to the green wire, and the wire harness terminal to the green/white wire.

3.3 Programació

After completing all wire connections, the device requires programming before it can be used. Refer to the specific programming instructions provided in the user manual included in your package for detailed steps. This step is critical for proper system functionality.

4. Instruccions de funcionament

The cruise control system offers various functions controlled via the switch handle and displayed on the digital unit.

Figura 4.1: Close-up of the cruise control handle, showing the "ON/OFF", "CANCEL", "SET", "SPEED", "RESUME", and "LIMIT" buttons for system control.

4.1 Fixed Speed Cruise Function

1. Obertura i tancament: Press the "ON/OFF" button to activate or deactivate the cruise control system.
2. Configuració de la velocitat: Once activated, accelerate to your desired speed and press the "SET" button. The vehicle will maintain this speed.
3. Controlling Speed:
   • Press "SPEED +" to increase the set speed.
   • Press "SPEED -" to decrease the set speed.
4. Superació: To temporarily accelerate for overtaking, press the accelerator pedal. The system will resume the set speed once the pedal is released.
5. Cancel·lació: Press the "CANCEL" button or apply the brake pedal to temporarily disengage cruise control without turning it off.
6. Resuming: After canceling, press "RESUME" to return to the previously set speed.

4.2 Speed Limit Function

1. Obertura i tancament: Press the "LIMIT" button to activate or deactivate the speed limiting device.
2. Setting and Adjusting Limit: Once activated, use the "SPEED +" and "SPEED -" buttons to set your desired maximum speed. The vehicle will not exceed this speed.

4.3 Altres funcions

• Electronic Throttle Output Control: The system manages the electronic throttle for smooth operation.
• Fuel Consumption Reminder: Provides alerts regarding fuel usage.
• Consum mitjà de combustible: Displays the average fuel efficiency.
• Digital Speedometer: The display unit functions as a digital speedometer.
• Recordatori de fatiga: Prompts the driver to take breaks during extended driving periods.
• Brake Circuit Fault Detection: Provides warnings if a fault is detected in the brake circuit.

5. Manteniment

The EASYGUARD ECC001 cruise control system is designed for durability and requires minimal maintenance. Keep the display unit clean and free from dust. Avoid exposing the control module and wiring to excessive moisture or extreme temperatures. Do not attempt to open or repair the control module yourself, as this may void any potential warranty and could cause damage.

6. Solució De Problemes

If you encounter issues with your EASYGUARD ECC001 system, consider the following:

• Sistema no activat:
  • Ensure all wiring connections are secure and correct, especially power and ground.
  • Verify that the system has been properly programmed after installation.
  • Check for any brake circuit fault detection warnings.
• Incorrect Speed Readings:
  • Confirm the yellow-white wire is correctly connected to the car speed or gearbox signal wire.
• System Disengages Unexpectedly:
  • Check brake pedal switch connections (pink and blue wires).
  • Ensure no loose connections in the main wiring harness.
• "Didn't fit my vehicle" (as per user feedback):
  • Re-verify vehicle compatibility: The system is for DC12V vehicles with a 6-wire electric throttle. If your vehicle does not meet these specific requirements, the system will not be compatible.

For persistent issues, contact customer support or a professional installer.

7. Especificacions

8. Garantia i Suport

For warranty information, technical support, or any inquiries regarding your EASYGUARD ECC001 system, please contact the manufacturer directly.

• Correu electrònic d'assistència tècnica: sales@ieasyguard.com
• Fabricant Weblloc: www.ieasyguard.com

Conserveu el vostre comprovant de compra per a reclamacions de garantia.