Import P110

Acmount P110 Car Jump Starter User Manual

Model: P110

1. Introducció

Thank you for choosing the Acmount P110 Car Jump Starter. This device is designed to provide a powerful and reliable solution for starting vehicles with dead batteries, as well as serving as a portable power bank and emergency light source. Please read this manual thoroughly before use to ensure safe and optimal operation.

Acmount P110 Car Jump Starter in use, showing 6000A peak current capability for various vehicles.

Image 1.1: The Acmount P110 Car Jump Starter demonstrating its 6000A peak current for starting vehicles up to 10.0L gas or 8.0L diesel engines.

2. Informació de seguretat

Observeu sempre les següents precaucions de seguretat per evitar lesions o danys al dispositiu o al vehicle:

  • No intenteu posar en marxa una bateria congelada.
  • Assegureu-vos de connectar la polaritat correcta (clavilla vermella)amp a positiu, negre clamp a negatiu) per evitar espurnes i danys.
  • No connecteu el cl positiu i negatiuamps junts.
  • Mantingueu el dispositiu lluny dels nens.
  • No exposeu el dispositiu a temperatures o humitat extremes.
  • Si el dispositiu s'escalfa excessivament durant l'ús, interrompeu-ne el funcionament immediatament.
  • Consulteu el manual del propietari del vostre vehicle per obtenir informació sobre els procediments específics d'arrencada amb ajuda del cable.
Acmount P110 Car Jump Starter highlighting 10 protection technologies including spark-proof, reverse-polarity, and over-charge protection.

Image 2.1: The Acmount P110 features 10 protection technologies for safe operation, including spark-proof, reverse-charge, high/low-temp, over-charge, short-circuit, reverse-polarity, AI-software monitoring, over-current, over-voltage, i protecció contra sobrecàrregues.

3. Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

  • Acmount P110 Jump Starter
  • Smart Jump Cables (with integrated battery and intelligent clamps)
  • Cable de càrrega USB tipus C
  • Estoig d'emmagatzematge
  • Manual d'usuari
Contents of the Acmount P110 Car Jump Starter package, including the jump starter unit, smart jump cables, USB-C charging cable, storage case, and user manual.

Image 3.1: All components included in the Acmount P110 Car Jump Starter package.

4. Característiques i components del producte

Familiarize yourself with the main parts of your Acmount P110 Jump Starter:

Diagram of Acmount P110 Car Jump Starter components, including Jump Start Output, Compass, Power Button, Indication Display, LED Light (Torch/Strobe/SOS), and USB-C input/output ports.

Image 4.1: Key components of the Acmount P110 Jump Starter.

  • Sortida d'arrencada ràpida: Port per connectar els cables d'acoblament intel·ligents.
  • Brúixola: Integrat per a l'assistència a la navegació.
  • Botó d'encesa: Activates the device and controls LED light modes.
  • Indication Display: Shows battery level and output status.
  • Llum LED: Functions as a flashlight, strobe, and SOS signal.
  • Entrada/sortida USB-C: For charging the jump starter and charging external devices.
  • USB 3.0 Outputs: Dual ports (5V/3A, 9V/2A, 15V/1.5A) for charging smartphones and other USB devices.

5. Configuració

5.1 Càrrega de l'arrencador de bateria

Before initial use, fully charge the Acmount P110 Jump Starter. It is recommended to charge the device every 2-3 months to maintain battery health, even when not in use.

  1. Connect the provided USB Type-C charging cable to the jump starter's USB-C port.
  2. Connect the other end of the USB Type-C cable to a suitable USB wall adapter (not included) or car charger.
  3. The indication display will show the charging progress. The device is fully charged when the display indicates 100%.

Note: Do not charge the starter immediately after a jump-starting operation. Allow the starter to cool down first.

6. Instruccions de funcionament

6.1 Arrencada amb salt d'un vehicle

Segueix aquests passos per engegar el teu vehicle amb seguretat:

  1. Preparar el vehicle: Assegureu-vos que el contacte del vehicle estigui apagat i que el fre d'estacionament estigui accionat.
  2. Connect the Smart Jump Cables: Insert the blue end of the smart jump cable into the jump start output port on the Acmount P110. Ensure a firm connection.
  3. Adjunteu Clamps a la bateria:
    • Connecteu el vermell positiu (+) clamp al terminal positiu (+) de la bateria del vehicle.
    • Connecteu el negre negatiu (-) clamp al terminal negatiu (-) de la bateria del vehicle.

    Avís: No toqueu el cl vermell i negreamps junts un cop connectats a l'arrencador.

  4. Indicador de comprovació: The smart jump cable's indicator light will show its status. A solid green light indicates a safe connection and readiness to jump start. If any other light or sound occurs, refer to the troubleshooting section.
  5. Arrancar el vehicle: Once the indicator is green, start your vehicle's engine.
  6. Eliminar Clamps: After the engine starts, immediately remove the smart jump cables in reverse order: first the black negative (-) clamp, then the red positive (+) clamp.
  7. Disconnect from Jump Starter: Disconnect the smart jump cable from the Acmount P110.
Three-step diagram showing how to jump start a vehicle: 1. Insert the jumper cable into the booster. 2. Connect the clamps to your car battery. 3. Start your car engine.

Image 6.1: Visual guide for jump starting your vehicle.

6.2 Charging Electronic Devices

The Acmount P110 can also function as a portable power bank for your electronic devices.

  1. Connect your device's USB charging cable to one of the USB output ports (USB 3.0 or USB-C) on the Acmount P110.
  2. The jump starter will automatically begin charging your device. The indication display will show the output status.
  3. Desconnecta el dispositiu un cop finalitzada la càrrega.
Acmount P110 Car Jump Starter being used as a portable power bank, showing its capacity to charge multiple devices like iPhones, iPads, Kindles, and smartwatches.

Image 6.2: The Acmount P110 as a portable power supply for various electronic devices.

6.3 Ús de la llanterna LED

The integrated LED flashlight has three modes: Flashlight, Strobe, and SOS.

  1. Per encendre la llanterna: Premeu llargament el botó d'encesa.
  2. To cycle through modes (Strobe, SOS): Short press the power button while the flashlight is on.
  3. To turn off the flashlight: Long press the power button again.
Acmount P110 Car Jump Starter demonstrating its LED flashlight with three modes: Flashlight (long press), SOS (short press), and Strobe (short press).

Image 6.3: Instructions for operating the LED flashlight modes.

7. Manteniment

Proper maintenance ensures the longevity and reliability of your Acmount P110 Jump Starter:

  • Càrrega regular: It is recommended to charge the jump starter every 2-3 months to keep the battery in a healthy state, even if not used. This helps prevent deep discharge and extends battery life.
  • Emmagatzematge: Store the device in a cool, dry place, away from direct sunlight and extreme temperatures. The device can hold power for about 12 months when not in use.
  • Neteja: Netegeu el dispositiu amb un drap suau i sec. No utilitzeu productes químics agressius ni netejadors abrasius.
  • Interval de temperatura: The device is designed to work in extreme environments, from -4°F (-20°C) to +140°F (+60°C).
Acmount P110 Car Jump Starter showing a 24-month standby time compared to 6-18 months for other devices, emphasizing long battery life.

Image 7.1: The Acmount P110 offers extended standby time, requiring less frequent charging.

8. Solució De Problemes

If you encounter issues with your Acmount P110 Jump Starter, refer to the following common problems and solutions:

ProblemaCausa possibleSolució
El vehicle no arrencaLow charge on jump starter, incorrect clamp connection, severely discharged vehicle battery, vehicle issue.Ensure jump starter is fully charged. Verify clamps are connected correctly (red to +, black to -). Try jump starting again after 30 seconds. If the vehicle still doesn't start, there might be another issue with the vehicle.
Smart clamp indicator light is not greenIncorrect connection, short circuit, reverse polarity, or other safety protection activated.Desconnectar clamps from both the jump starter and the vehicle battery. Re-read safety instructions and reconnect carefully, ensuring correct polarity. If the issue persists, the vehicle battery might be faulty.
L'arrencador de bateria no carregaFaulty charging cable, adapter, or port.Try a different USB-C cable and wall adapter. Ensure the cable is fully inserted into the jump starter's USB-C port.
Jump starter gets hot during useNormal operation under heavy load, or potential overload.A slight warmth is normal. If it becomes excessively hot, disconnect immediately and allow it to cool down. Ensure the vehicle's engine size is within the jump starter's specifications.

Si el problema persisteix després de provar aquestes solucions, poseu-vos en contacte amb l'atenció al client.

9. Especificacions

CaracterísticaEspecificació
MarcaAcmount
Número de modelP110
Corrent màxima de sortida6000 Amps
Capacitat de la bateria20000 milionsamp Hores
Composició de les cèl·lules de la bateriaIó de liti
Voltage14.8 Volts
Compatibilitat del motorMotor de gasolina de fins a 10.0 litres o dièsel de 8.0 litres
Dimensions del producte (P x A x A)4 "P x 5" W x 9" H
Pes de l'article1 quilograms
Sortida USB 15V/3A
Sortida USB 29V/2A
Sortida USB 315V/1.5A
Modes de llanterna LEDFlashlight, Strobe, SOS
Temperatura de funcionament-4 °F (-20 °C) a +140 °F (+60 °C)

10. Garantia i Suport

The Acmount P110 Car Jump Starter comes with a 12 mesos de garantia. Acmount also provides lifetime reliable technical support.

If you have any questions, concerns, or require assistance with your product, please contact our professional after-sales team. We are committed to providing a satisfactory solution.

For support, please refer to the contact information provided on the Acmount official weblloc web o la documentació de la compra.

© 2026 Acmount. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.