Maxxima MRL-S61245S

Maxxima 6-inch Slim Square LED Downlight Instruction Manual

Model: MRL-S61245S | Brand: Maxxima

1. Producte acabatview

The Maxxima 6-inch Slim Square LED Downlight is a canless, ultra-thin recessed lighting solution designed for easy installation in various indoor and damp locations. This fixture features 5 CCT (Correlated Color Temperature) selectable options, allowing you to choose between 2700K (Soft White), 3000K (Warm White), 3500K (Bright White), 4000K (Neutral White), and 5000K (Daylight) to suit your preference. It provides 1000 lumens of light output while consuming only 12 watts of power, offering an energy-efficient alternative to traditional lighting.

The downlight comes with an integrated junction box and wiring hardware, eliminating the need for a separate can or housing. Its cast aluminum body ensures durability and a lightweight design. This product is ETL Listed and suitable for damp locations, making it ideal for bathrooms, kitchens, hallways, and more.

Davant view of the Maxxima 6-inch Slim Square LED Downlight

Imatge 1.1: Frontal view of the Maxxima 6-inch Slim Square LED Downlight.

2. Informació de seguretat

  • ADVERTIMENT: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans de la instal·lació o el manteniment.
  • Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
  • Utilitzeu-lo només amb circuits de 120 V CA i 60 Hz.
  • Do not modify the fixture. Any modification may void the warranty and create safety hazards.
  • Apte per a damp locations. Do not use in areas where directly exposed to water.
  • IC Rated: Suitable for direct contact with insulation.
  • Assegureu-vos que totes les connexions elèctriques estiguin segures i correctament aïllades.

3. Contingut del paquet

  • 1 x Maxxima 6-inch Slim Square LED Downlight
  • 1 x Junction Box
  • Wiring Hardware
  • 1 x junta d'escuma
  • Manual d'instruccions

4. Especificacions

CaracterísticaEspecificació
Número de modelMRL-S61245S
Mida6 polzades (quadrades)
Consum d'energia12 watts
Sortida de lumens1000 lúmens
Temperatura de color (CCT)Seleccionable: 2700K, 3000K, 3500K, 4000K, 5000K
Voltage120 V AC
CRI82
Extensió del feix120°
Regulable
Dimensions de la caixa de connexions1.4 cm d'alçada x 2.7 cm d'amplada x 4.11 cm de profunditat
Mida de retall0.85"
Dimensions del producte6.7 x 6.7 x 0.9 polzades
Pes1 lliures
MaterialAlumini, metall
CertificacionsCertificat ETL, classificat IC
Classificació de la ubicacióDamp Location Suitable

5. Configuració i instal·lació

Abans de començar: Ensure power is turned OFF at the circuit breaker before starting installation to prevent electrical shock.

  1. Prepareu l'obertura del sostre: Cut a square hole in the ceiling at the desired location. The recommended hole size for this 6-inch square downlight is approximately 6.25 inches x 6.25 inches.
  2. Connect the Downlight to the Junction Box: The downlight connects to the provided junction box via a male-female connector. Align the pins and push firmly until it clicks into place.
  3. Maxxima downlight connected to its junction box

    Image 5.1: The downlight's cable connects to the junction box.

  4. Wire the Junction Box: Open the junction box cover. Connect the household electrical wires to the wires inside the junction box using the provided wiring hardware (wire nuts):
    • Connecteu el negre wire from the household circuit to the negre wire of the junction box.
    • Connecteu el blanc wire from the household circuit to the blanc wire of the junction box.
    • Connecteu el ground (bare copper or green) wire from the household circuit to the verd wire of the junction box.
    Ensure all connections are secure. Close the junction box cover.
  5. lateral view of the Maxxima downlight showing the spring clips

    Imatge 5.2: Lateral view of the downlight, highlighting the spring clips for installation.

  6. Install the Downlight: Gently push the spring clips on the sides of the downlight upwards. Insert the downlight into the ceiling opening. The spring clips will automatically snap down and secure the fixture in place against the ceiling.
  7. Secure the Junction Box: Place the junction box inside the ceiling cavity, ensuring it is not pinched or damaged by the downlight or other structures.

Per obtenir una guia visual, consulteu el vídeo oficial d'instal·lació:

Video 5.3: Official installation and feature overview for the Maxxima 6-inch Slim Square LED Downlight.

6. Instruccions de funcionament

6.1. Selecció de la temperatura de color (CCT)

The Maxxima 6-inch Slim Square LED Downlight features a 5 CCT selectable switch located on the side of the junction box. This switch allows you to choose your preferred light color before or after installation. To change the CCT:

  1. Ensure power is OFF before accessing the junction box if it's already installed.
  2. Locate the CCT selection switch on the side of the junction box.
  3. Slide the switch to select one of the five available color temperatures: 2700K, 3000K, 3500K, 4000K, or 5000K.
  4. Restore power to test the selected CCT.
Close-up of the CCT selection switch on the junction box

Imatge 6.1: Primer pla view of the 5 CCT selection switch on the junction box.

Visual representation of the five selectable CCT options in a room setting

Image 6.2: Illustration of how different CCTs (2700K to 5000K) appear in a room.

6.2. Funcionalitat de regulació de la intensitat

This LED downlight is dimmable. To utilize the dimming feature, ensure you are using a compatible LED dimmer switch (sold separately). Follow the dimmer switch manufacturer's instructions for installation and operation.

7. Manteniment

The Maxxima 6-inch Slim Square LED Downlight requires minimal maintenance. The LED light source is integrated and not user-replaceable.

  • Neteja: Ensure power is OFF before cleaning. Wipe the fixture with a soft, dry, or slightly damp drap. No utilitzeu productes químics agressius, netejadors abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
  • Inspecció: Periodically inspect the fixture for any signs of damage or loose connections. If any issues are found, disconnect power and contact a qualified electrician or Maxxima support.

8. Solució De Problemes

ProblemaCausa possibleSolució
La llum no s'encénSense energia a l'aparell
Connexió de cablejat solta
Fixació defectuosa
Comproveu l'interruptor de circuit i l'interruptor de paret.
Verify all wiring connections are secure (ensure power is OFF first).
Contact Maxxima support if power is confirmed and connections are secure.
La llum parpelleja o s'atenua de manera inesperadaInterruptor de regulació incompatible
Connexió de cablejat solta
Voltage fluctuacions
Ensure a compatible LED dimmer is used. Replace if necessary.
Check wiring connections (power OFF).
Consulteu un electricista per comprovar el voltatge de la llartage.
Incorrect CCT displayedL'interruptor CCT està mal configuratAdjust the CCT selection switch on the junction box to the desired setting (power OFF).

9. Garantia i Suport

This Maxxima 6-inch Slim Square LED Downlight (Model MRL-S61245S) is backed by a Garantia del fabricant de 3 anys des de la data de compra. Aquesta garantia cobreix els defectes de materials i de mà d'obra en ús normal.

For warranty claims, technical assistance, or any questions regarding your product, please contact Maxxima customer support. Keep your proof of purchase for warranty validation.

Maxxima Customer Support: Consulteu la informació de contacte que apareix a l'embalatge del producte o a la fitxa oficial de Maxxima. weblloc web per obtenir els detalls d'assistència més actualitzats.

© 2026 Maxxima. Tots els drets reservats.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.