1. Instruccions de seguretat importants
Please read all instructions carefully before using this electric fireplace stove. Failure to follow these instructions may result in electric shock, fire, or personal injury.
- Connecteu sempre la llar de foc directament a una presa de corrent. No l'utilitzeu mai amb un cable d'extensió ni una presa de corrent reubicable.
- Do not operate any fireplace with a damaged cord or plug, or if the heater malfunctions, has been dropped or damaged in any manner.
- Mantingueu els materials combustibles, com ara mobles, coixins, roba de llit, papers, roba i cortines com a mínim a 3 peus (0.9 m) de la part davantera de la llar de foc.
- Per evitar el sobreescalfament, no tapeu l'escalfador.
- The air outlet is located at the top of the product. Ensure this area is not obstructed to maintain proper airflow and prevent safety hazards.
- This appliance is equipped with an automatic power-off function. If the fireplace is accidentally knocked over during use, it will automatically cut off power to enhance safety.
2. Producte acabatview
The Electactic 24-Inch Electric Fireplace Stove (Model S230B) is a free-standing infrared fireplace designed to provide warmth and ambiance. It features a realistic 3D flame effect with adjustable colors and brightness, two heating modes, and a convenient remote control.
Figura 1: Frontal view of the Electactic Electric Fireplace Stove with flames active.
3. Muntatge i muntatge
This section guides you through the initial setup and assembly of your electric fireplace stove.
3.1 Desembalatge i inspecció
- Traieu amb cura tots els components de l'embalatge.
- Inspect the fireplace and all parts for any signs of damage. If any damage is found, do not use the appliance and contact customer support.
- Ensure all items listed in the 'What's in the Box' section are present.
Figure 2: Product dimensions and included components.
3.2 Assembly of Legs
The fireplace stove requires minimal assembly, primarily attaching the four legs.
- Carefully place the fireplace on a soft, non-abrasive surface to prevent scratching.
- Attach each of the 4 legs to the bottom of the fireplace using the provided 8pcs M5*12 screws. A Phillips head screwdriver is required (not included).
- Ensure all legs are securely fastened before placing the unit upright.
3.3 Col·locació
Choose a suitable location for your fireplace. Consider the following:
- Col·loqueu la unitat sobre una superfície ferma i plana.
- Ensure there is adequate space around the unit for proper air circulation. Avoid placing it directly against a wall if it obstructs the rear air intake, as this can affect heating efficiency.
- Do not place the fireplace in an area where it could be easily tripped over or where the power cord could be damaged.
4. Instruccions de funcionament
Your Electactic electric fireplace can be operated using the included remote control or the touch light panel on the unit.
4.1 Engegada/apagada
- Connecteu el cable d'alimentació a una presa estàndard de 120 V CA.
- Premeu el botó Poder button on the remote control or the touch panel to turn the appliance ON/OFF.
4.2 Adjusting Flame and Log Colors/Brightness
The fireplace features a curved LED screen for realistic 3D flame effects. You can customize the flame and log appearance.
Figure 3: Flame and log color/brightness options.
- Colors de la flama: Utilitza el Color A button on the remote to cycle through 4 flame colors: Red, Yellow, Orange, Blue.
- Log Colors: Utilitza el Color B button on the remote to cycle through 4 log colors: Red, Yellow, Dark Red, Orange.
- Brillantor: Utilitza el Dimmer button to adjust the flame and log brightness through 5 levels (L1-L5).
- Velocitat de la flama: Utilitza el Velocitat de la flama button to adjust the flame movement speed through 5 levels (U1-U5).
- There are 16 different combinations of flame and log colors available.
4.3 Funcions de calefacció
The fireplace offers two heating modes for efficient warmth.
Figure 4: Heating port location and power settings.
- Premeu el botó Escalfador button on the remote or touch panel to activate heating.
- The display screen will show the heating mode: OFF (no heater), 500W (low heat), or 1500W (high heat).
- The unit can heat up to 1,000 square feet.
4.4 Funció de temporitzador
Establiu un temporitzador per a l'apagat automàtic.
Figura 5: Disposició del comandament a distància.
- Premeu el botó Temporitzador botó del comandament a distància.
- Cycle through the available timer settings (1-8 hours) to select your desired shut-off time.
4.5 Funcionament amb baix soroll
The fireplace operates at a low noise level, typically below 40dB, ensuring it does not disturb sleep or daily activities.
Figure 6: Illustration of low noise operation and timer convenience.
5. Manteniment
To ensure the longevity and optimal performance of your Electactic electric fireplace, follow these general maintenance guidelines:
- Neteja: Ensure the unit is turned off and unplugged before cleaning. Use a soft, damp drap per netejar les superfícies exteriors. No utilitzeu netejadors ni esprais abrasius.
- Vendes d'aire: Periodically check and clean the air intake and outlet vents to ensure they are free from dust and debris. Blocked vents can reduce heating efficiency and pose a fire hazard.
- Emmagatzematge: If storing the fireplace for an extended period, unplug it and store it in a dry, cool location, preferably in its original packaging.
6. Solució De Problemes
This section addresses common issues you might encounter with your electric fireplace.
| Problema | Causa possible | Solució |
|---|---|---|
| La llar de foc no s'encén. | No connectat; mal funcionament de la presa de corrent; no s'ha premut el botó d'engegada. | Ensure the unit is securely plugged into a working outlet. Press the power button on the remote or touch panel. |
| Sense sortida de calor. | Heater function not activated; low heat setting; obstructed air vents. | Press the heater button to select 500W or 1500W mode. Ensure air vents are clear. |
| Flame effect not visible or dim. | Brightness setting too low; unit off. | Adjust the brightness using the Dimmer button. Ensure the unit is powered on. |
| La unitat s'apaga automàticament. | Overheat protection activated; unit was knocked over; timer expired. | Allow the unit to cool down. Ensure the unit is stable. Check timer settings. |
| Room not heating effectively. | Incorrect placement; large room size; low heat setting. | Ensure the unit is not placed directly against a wall, allowing for proper air intake. Select 1500W heating mode. Note that the unit is designed for rooms up to 1000 sq ft. |
If you experience any issues not covered in this section, please contact customer support.
7. Especificacions
| Característica | Detall |
|---|---|
| Marca | Electàctic |
| Nom del model | S230B |
| Dimensions del producte | 23.5 cm de llargada x 10.7 cm d'amplada x 24.3 cm d'alçada |
| Pes de l'article | 33.2 lliures |
| Material | Ferro colat |
| Font d'alimentació | Elèctric |
| Voltage | 120 VCA |
| Wattage | 500 W / 1500 W |
| Amps | 12.5 AMP |
| Sortida de calor | 5100 BTU |
| Cobertura de calefacció | Fins a 1000 peus quadrats |
| Característiques especials | 4 Flame/Log Color, 5 Flame Speed, 5 Flame/Log Brightness, Remote control, Timer, Touch Button Light |
| Tipus d'instal·lació | Autònom |
8. Garantia i Suport
8.1 Informació de la garantia
This product comes with a Free Return and Replacement warranty. Please refer to your purchase documentation for specific terms and conditions regarding returns and replacements.
8.2 Atenció al client
For any questions, technical assistance, or warranty claims, please contact Electactic customer support through the retailer where the product was purchased. Keep your purchase receipt and model number (S230B) handy for faster service.