Introducció
Thank you for choosing the Jambo 16-inch Liquid Motion Lamp. This manual provides essential information for the safe and proper use, setup, operation, and maintenance of your lampSi us plau, llegiu-lo atentament abans d'utilitzar-lo i conserveu-lo per a futures consultes.
The Jambo Liquid Motion Lamp creates a mesmerizing visual display as heated wax slowly rises and falls within a liquid-filled glass vessel. This dynamic effect provides a calming and decorative ambiance for any indoor space.
Informació de seguretat
Per garantir un funcionament segur i evitar danys, observeu les següents precaucions de seguretat:
- Només per a ús interior: Aquesta lamp is designed for indoor use in dry locations. Do not use it outdoors or in wet environments.
- Seguretat elèctrica: Assegureu-vos que lamp is connected to a 120-volt power outlet. Do not overload electrical outlets.
- Avís de calor: El lamp and its contents become hot during operation. Do not touch the glass or base while the lamp is on or immediately after turning it off. Allow sufficient time for cooling.
- Col·locació estable: Col·loca la lamp on a flat, stable, and heat-resistant surface away from edges where it could be easily knocked over.
- Avoid Shaking: Do not shake, drop, or move the lamp while it is operating or hot, as this can damage the internal components and cause the liquid to become cloudy.
- Mantenir allunyat dels nens i de les mascotes: Due to the heat generated, keep the lamp fora de l'abast dels nens i mascotes.
- Ventilació: Ensure adequate air circulation around the lamp to prevent overheating. Do not cover the lamp.
- Cable danyat: Si el cable d'alimentació està malmès, l'ha de substituir el fabricant o un agent de servei qualificat per evitar perills.
Contingut del paquet
Verifiqueu que tots els components siguin presents en desembalar-lo:
- 1 x Jambo Liquid Motion Lamp Unit (Base, Glass Vessel, Cap)
- 1 x 30-Watt Incandescent Bulb (E17 base)
Configuració
Follow these steps to set up your Jambo Liquid Motion Lamp:
- Desembalar: Traieu amb cura tots els components de l'embalatge.
- Instal·lació de bombetes: If the bulb is not pre-installed, gently screw the included 30-watt E17 incandescent bulb into the socket located in the lamp base. Do not overtighten.
- Place Glass Vessel: Carefully place the glass vessel onto the lamp base, ensuring it sits securely.
- Attach Cap: Place the decorative cap onto the top of the glass vessel.
- Posició Lamp: Col·loqueu la l muntadaamp on a flat, stable, and heat-resistant surface, away from direct sunlight, extreme temperatures, or drafts.
- Connectar l'alimentació: Connecteu el cable d'alimentació a una presa de corrent estàndard de 120 volts.
Instruccions de funcionament
Operating your Jambo Liquid Motion Lamp és senzill:
- Activar: Locate the rotary switch on the power cord or base (depending on model) and turn it to the 'ON' position. The bulb will illuminate.
- Temps d'escalfament: For the first use, or after extended periods of inactivity, the lamp may take 2-4 hours to fully warm up and for the wax to begin flowing smoothly. This is normal.
- Wax Movement: Once warmed, the wax will begin to soften, rise, and fall in captivating patterns. The lamp operates best at room temperature (20-25°C / 68-77°F).
- Durada de funcionament: For optimal performance and longevity, it is recommended to operate the lamp for no more than 8-10 hours at a time. Allow it to cool down completely before restarting.
- Apagar: Per apagar la lamp, rotate the switch to the 'OFF' position and unplug it from the power outlet when not in use for extended periods.
Manteniment
Proper care will ensure the longevity and performance of your lamp:
- Neteja: Assegureu-vos que lamp is unplugged and completely cool before cleaning. Wipe the exterior of the glass and base with a soft, damp cloth. Do not use abrasive cleaners or immerse any part of the lamp a l'aigua.
- Substitució de bombetes: If the bulb burns out, unplug the lamp and allow it to cool. Carefully remove the old bulb and replace it with a new 30-watt, E17 base incandescent bulb. Ensure the replacement bulb matches the original specifications.
- Emmagatzematge: Si emmagatzema la lamp for an extended period, ensure it is clean, dry, and stored upright in a cool, dark place.
- No obrir: Never attempt to open the sealed glass vessel or tamper with its contents. This will void any warranty and can be dangerous.
Resolució de problemes
If you encounter issues with your Jambo Liquid Motion Lamp, consulteu els problemes i solucions habituals següents:
| Problema | Causa possible | Solució |
|---|---|---|
| Lamp no s'encén. | No power, faulty bulb, or loose connection. | Comproveu si la lamp is properly plugged in. Ensure the power outlet is functional. Verify the rotary switch is in the 'ON' position. Replace the bulb if it is burnt out. |
| Wax is not moving or moving slowly. | Insufficient warm-up time, cold room temperature, or incorrect bulb wattage. | Allow 2-4 hours for the lamp to fully warm up. Ensure the room temperature is between 20-25°C (68-77°F). Confirm the bulb is a 30-watt E17 incandescent type. |
| Liquid is cloudy. | Initial cloudiness, lamp shaken, or improper storage. | Initial cloudiness often clears after several hours of continuous operation. Avoid shaking or dropping the lamp. If cloudiness persists after multiple uses, contact customer support. |
| Wax is stuck at the top or bottom. | Not fully warmed up, lamp tilted, or excessive heat/cold. | Assegureu-vos que lamp has had sufficient warm-up time. Verify the lamp is placed on a level surface. Avoid placing the lamp near heat sources or in very cold areas. |
Especificacions
Key technical specifications for the Jambo 16-inch Liquid Motion Lamp (Model KL-217):
| Característica | Detall |
|---|---|
| Número de model | KL-217 |
| Dimensions (P x A x A) | 11.4 cm x 11.4 cm x 39.4 cm (aprox. 4.5 x 4.5 x 15.5 polzades) |
| Alçada de l'ombra | 16 polzades |
| Font d'alimentació | Elèctric amb cable |
| Voltage | 120 Volts |
| Wattage | 30 watts |
| Tipus de bombeta | Incandescent |
| Base del bulb | E17 |
| Tipus de canvi | Rotativa |
| Material base | Alumini |
| Material d'ombra | Vidre |
| Tipus d'acabat | Metàl·lic |
| Ús interior/exterior | Interior |
| Nivell de resistència a l'aigua | No impermeable |
| UPC | 850019692297 |
Garantia i Suport
Jambo is committed to providing high-quality products. While specific warranty details are not provided in this manual, please retain your proof of purchase for any warranty claims.
For technical support, troubleshooting assistance beyond what is covered in this manual, or inquiries regarding parts and service, please contact Jambo customer support through the retailer where you purchased the product or visit the official Jambo weblloc per obtenir informació de contacte.