Ecolight LED Battery-Operated Bar Light Instruction Manual

1. Introducció

This manual provides instructions for the installation, operation, and maintenance of your Ecolight LED Battery-Operated Bar Light. This versatile 9-inch LED light offers both 4000K bright white and RGB color-changing options, controlled by tapping the light or using the included infrared (IR) remote control. It is designed for various indoor applications such as under cabinets, in laundry rooms, living rooms, utility areas, or closets.

Què inclou:

• Ecolight LED Bar Light
• Comandament a distància per infrarojos (IR).
• 6 piles AA
• Command Strips by 3M for damage-free mounting
• Cargols de muntatge

Figure 1: Ecolight LED Bar Light with remote and mounting accessories.

2. Informació de seguretat

• Llegiu totes les instruccions abans de la instal·lació i l'ús.
• This product is intended for indoor use only. Do not expose to water or high humidity.
• No barregeu piles velles i noves. No barregeu piles alcalines, estàndard (carboni-zinc) o recarregables (níquel-cadmi).
• Remove batteries if the light will not be used for an extended period.
• Mantingueu les piles fora de l'abast dels nens.
• Do not stare directly into the LED light source.

3. Configuració

3.1 Instal·lació de la bateria

1. Remove the back battery compartment cover by sliding it off.
2. Introduïu les 6 piles AA, assegurant-vos de la polaritat correcta (+/-) tal com s'indica a l'interior del compartiment.
3. Substituïu la tapa del compartiment de la bateria.

Figure 2: Installing AA batteries into the light bar.

3.2 Opcions de muntatge

The Ecolight LED Bar Light can be mounted using either the included Command Strips for damage-free installation or screws for a permanent fixture.

Using Command Strips (Damage-Free Mounting):

1. Clean the desired mounting surface with rubbing alcohol and let it dry completely.
2. Separate the Command Strips. Remove the red liner from one side of each strip and press it firmly onto the back of the light bar.
3. Remove the black liners from the exposed side of the Command Strips.
4. Position the light bar on the cleaned surface and press firmly for 30 seconds.
5. To remove, gently slide the light bar off the mounted base. Then, slowly stretch each strip downwards against the surface until it releases.

Figure 3: Attaching Command Strips to the light bar for mounting.

Using Screws (Permanent Mounting):

1. Mark the desired screw locations on your mounting surface using the keyhole slots on the back of the light bar as a guide.
2. Perforeu forats pilot si cal.
3. Insert the included screws into the pilot holes, leaving a small gap between the screw head and the surface.
4. Align the keyhole slots on the back of the light bar with the screw heads and slide the light into place until secure.

3.3 Vídeo d'instal·lació

Video 1: Detailed instructions for installing and removing the Ecolight LED Bar Light using Command Strips.

4. Instruccions de funcionament

4.1 Control de tocs

The light bar features a tap-on/off activation directly on its lens:

• Toca una vegada: Activates bright white light (4000K).
• Toqueu dues vegades: Initiates continuous RGB color cycling.
• Toca tres vegades: Sets the light to the currently displayed RGB color.
• Toca quatre vegades: Apaga la llum.

Figure 4: Tap activation on the light bar lens.

4.2 Funcions de control remot

The included IR remote control provides comprehensive control over the light bar's features:

• ON/OFF: Encén o apaga la llum.
• LED: Activates continuous RGB color cycling.
• Blanc: Activates 4000K bright white light.
• +/- (Brightness): Adjusts the brightness level (dimmable).
• Botons R, G, B: Selects specific Red, Green, or Blue colors.
• Roda de colors: Allows selection of various colors within the RGB spectrum.
• SET: Confirms a selected color from the color wheel.
• Timer (5, 15, 30, 60 minutes): Sets an auto-off timer for the specified duration.

Figure 5: Remote control for the LED Bar Light.

Figura 6: Examples of RGB color output from the light bar.

5. Manteniment

5.1 Substitució de la bateria

When the light output diminishes or the light stops functioning, it's time to replace the batteries. The easy battery change compartment allows you to slide the light out without removing the mounting strips (if used).

1. If mounted with Command Strips, gently slide the light bar off its mounted base.
2. Remove the back battery compartment cover.
3. Replace all 6 AA batteries with new ones, observing correct polarity.
4. Replace the battery compartment cover and reattach the light bar to its base (if applicable).

5.2 Neteja

To clean the light bar, wipe it with a soft, dry cloth. Do not use abrasive cleaners or solvents, as these may damage the finish or electronic components.

6. Solució De Problemes

7. Especificacions

• Número de model: BO1307-RGB-09LF1-E
• Tipus de font de llum: LED
• Brillantor: 80 lúmens
• Temperatura de color: 4000K (White), RGB Color Changing
• Font d'alimentació: 6 piles AA (incloses)
• Durada de la bateria: Aproximadament 100 hores
• Dimensions del producte: 9" d'amplada x 2.5" d'alçada x 1" de profunditat
• Pes de l'article: 3.68 unces
• Material: Plàstic
• Mètode de control: Tap, Infrared Remote
• Característiques especials: Dimmable, Auto-Off Timer (5, 15, 30, 60 min)
• Ús interior/exterior: Només interior
• Vida mitjana: 30,000 hores

Figura 7: Dimensions del producte.

8. Garantia i Suport

This Ecolight LED Battery-Operated Bar Light comes with a Garantia limitada d'6 any. For warranty claims, technical support, or further assistance, please contact Good Earth Lighting customer service. Refer to the product packaging or the official Good Earth Lighting weblloc per obtenir dades de contacte.