FTVOGUE 12V Level Control Switch Module

1. Introducció

This manual provides essential information for the proper installation, operation, and maintenance of your FTVOGUE 12V Level Control Switch Module. Please read this manual thoroughly before using the product to ensure safe and efficient operation.

Figure 1: Two FTVOGUE 12V Level Control Switch Modules, showing the relay, capacitor, and terminal blocks from an angled top-down perspective.

2. Informació de seguretat

• Ensure the power supply matches the module's voltage requirements (12V DC).
• Desconnecteu l'alimentació abans de fer qualsevol connexió o realitzar tasques de manteniment.
• Eviteu exposar el mòdul a la humitat, temperatures extremes o ambients corrosius.
• Installation should be performed by qualified personnel if you are unfamiliar with electrical wiring.
• Do not exceed the relay's maximum switching capacity (10A at 250VAC / 10A at 30VDC).

3. Característiques del producte

The FTVOGUE 12V Level Control Switch Module offers reliable liquid level detection and control with the following features:

• Construcció duradora: Made with a high-quality PCB board for low power consumption and extended lifespan.
• Rendiment estable: Features simple wiring, low power consumption, and high switching capacity for consistent operation.
• Fàcil instal·lació: Compact and lightweight design allows for convenient setup.
• Aplicació àmplia: Suitable for use in various environments requiring automatic drainage or liquid level management, such as pond tanks, garages, and basements.

4. Identificació de components

Familiarize yourself with the key components and terminals of the module:

Figura 2: Primer pla superior view of a single FTVOGUE 12V Level Control Switch Module, highlighting the relay, PCB traces, and terminal block labels (VCC, GND, LOW, COM, HIGH, NC, NO).

• VCC: Power input (12V DC).
• GND: Connexió a terra.
• ALTA: Input for the upper liquid level sensor.
• BAIX: Input for the lower liquid level sensor.
• COM (Sensor): Common connection for liquid level sensors.
• NO: Relay Normally Open contact.
• NC: Relay Normally Closed contact.
• COM (Relay): Common contact for the relay output.

5. Configuració i instal·lació

Follow these steps to install your level control switch module:

1. Muntatge: Securely mount the module in a dry, stable location away from direct moisture or excessive vibration.
2. Connexió d'alimentació: Connect a 12V DC power supply to the VCC i GND terminals. Ensure correct polarity.
3. Connexió del sensor: Connect your liquid level sensors to the ALTA, BAIXA, i COM (Sensor) terminals. The ALTA terminal is for the upper level sensor, and the BAIXA terminal is for the lower level sensor. The COM (Sensor) terminal is the common connection for both sensors.
4. Connexió de càrrega: Connect the device you wish to control (e.g., pump, valve) to the relay output terminals: NO, NC, i COM (relé). Choose between NO (Normally Open) or NC (Normally Closed) based on whether you want the device to activate when the relay is energized or de-energized.
5. Verifica les connexions: Double-check all wiring for correctness and secure connections before applying power.

Figure 3: Two FTVOGUE 12V Level Control Switch Modules, viewed from a slightly different angle, emphasizing the compact size and terminal block arrangement.

6. Instruccions de funcionament

Once properly installed and powered, the module operates as follows:

• The module continuously monitors the liquid levels via the connected sensors.
• When the liquid level reaches the ALTA sensor, the relay will activate (or de-activate, depending on configuration) to control the connected load.
• When the liquid level drops below the BAIXA sensor, the relay will switch back to its original state, controlling the connected load accordingly.
• This allows for automatic control of pumps (e.g., for drainage or filling) or alarms based on predefined liquid levels.

7. Manteniment

The FTVOGUE Level Control Switch Module is designed for long-term, low-maintenance operation. To ensure optimal performance:

• Periodically inspect all wiring connections to ensure they remain secure.
• Mantingueu el mòdul net i lliure de pols i deixalles. Feu servir un drap suau i sec per netejar-lo.
• Assegureu-vos que l'entorn de funcionament es mantingui dins dels rangs de temperatura i humitat especificats.
• Regularly check the liquid level sensors for any buildup or damage that might affect their accuracy.

8. Solució De Problemes

If you encounter issues with your module, refer to the following troubleshooting guide:

9. Especificacions tècniques

10. Garantia i Suport

For warranty information or technical support, please refer to the retailer or manufacturer's official channels. Keep your purchase receipt for any warranty claims.