AODELAN TR90 Wired Remote Controller for Camera

Introducció

The AODELAN TR90 is a wired remote controller with a digital timer designed for camera shutter activation. It provides precise control over delay, exposure time, interval, and the number of shots for various photography techniques, including time-lapse and long exposure. This device features a two-stage shutter button, a backlit LCD display, status LED, and an audible beep for operational feedback.

Producte acabatview

Figura 1: Labeled diagram of the AODELAN TR90 remote controller, showing its components including the release lamp, display panel, illuminator/lock button, TIMER START/STOP button, ON/OFF button, SET button, selector button, shutter-release button, and battery-chamber cover. The back of the unit shows the model number TR90 and battery requirements.

• Release Lamp: Indica l'estat de funcionament.
• Tauler de visualització: LCD screen for settings and status.
• Illuminator/Lock Button: Activates backlight or locks controls.
• TIMER START/STOP Button: Initiates or halts timer functions.
• Botó ON/OFF: Encén o apaga el dispositiu.
• Botó SET: Confirma les seleccions.
• Selector Button: Navigates through menu options and adjusts values.
• Shutter-Release Button: Dos-stage button for autofocus (half-press) and photo capture (full-press).
• Battery-Chamber Cover: Protegeix el compartiment de la bateria.

Configuració

1. Instal·lació de la bateria

1. Locate the battery-chamber cover on the back of the remote controller (refer to Figure 1).
2. Feu lliscar la coberta oberta.
3. Insert two AAA 1.5V LR03 alkaline batteries, ensuring correct polarity (+/-). Nota: les piles no estan incloses.
4. Close the battery-chamber cover securely.

2. Connexió a la càmera

1. Ensure both the camera and the remote controller are powered off.
2. Connect the remote controller's cable to the remote control terminal on your camera. The connection port type may vary by camera model.
3. Power on the camera and then the remote controller.

Instruccions de funcionament

Basic Shutter Operation

• Enfocament automàtic: Half-press the shutter-release button to activate your camera's autofocus.
• Capturar foto: Fully press the shutter-release button to take a picture.

Funcions del temporitzador

The TR90 offers four primary timer functions: Delay, Long Exposure, Interval, and Number of Shots. These can be set from 0 seconds up to 99 hours, 59 minutes, and 59 seconds in one-second increments, except for the number of shots.

Figura 2: Mostra examples for setting Delay, Long Exposure (LONG), Interval (INTVL), and Number of Shots (NUMBER) on the AODELAN TR90. This image also illustrates the concept of time-lapse photography.

Figura 3: Detallada view of the AODELAN TR90 display, showing the ranges for Delay, Long Exposure (LONG), Interval (INTVL), and Number of Shots (N). It also highlights the Lock indicator, Low battery indicator, and Speaker on/off indicator.

1. Paràmetres de configuració:
   • Premeu el botó SET button to cycle through the parameters: DELAY, LONG (exposure time), INTVL (interval), and N (number of shots).
   • Utilitza el botons de selecció (up/down/left/right) to adjust the values for each parameter.
   • Premeu SET again to confirm the value and move to the next parameter.
2. RETARD: Time before the first shot is taken. (Range: 0s to 99h 59m 59s)
3. LONG (Exposure Time): Duration the shutter remains open. (Range: 0s to 99h 59m 59s)
4. INTVL (Interval): Time between consecutive shots. (Range: 0s to 99h 59m 59s)
5. N (Number of Shots): Total number of photos to be taken. (Range: 1 to 399, or '--' for unlimited. To set unlimited, select '1' and press the down selector button.)
6. Starting/Stopping Timer: Premeu el botó TIMER START/STOP button to begin or end the programmed sequence.

Funcions avançades

• BULB Mode: For exposures longer than the camera's maximum shutter speed. Set the LONG parameter to the desired duration.
• Disparo continu d'alta velocitat: Allows for rapid consecutive shots.

Figura 4: The AODELAN TR90 remote controller being used for creative photography scenarios, highlighting its BULB mode and High-Speed Continuous Shooting capabilities.

Anti-Shake Function

Using the remote controller helps prevent camera shake that can occur when manually pressing the camera's shutter button, especially crucial for long exposures or telephoto shots.

Figura 5: Illustration of the anti-shake benefit of using the AODELAN TR90 remote controller, showing a camera on a tripod and the remote being used to trigger the shutter without direct contact with the camera body.

Manteniment

• Keep the remote controller dry. Do not expose it to moisture or rain.
• Netegeu el dispositiu amb un drap suau i sec. Eviteu utilitzar productes químics agressius o netejadors abrasius.
• Emmagatzemar en un lloc fresc i sec quan no s'utilitzi.
• Traieu les piles si no heu d'utilitzar el dispositiu durant un període prolongat per evitar fuites.

Resolució de problemes

• El dispositiu no s'encén: Comproveu la instal·lació de les piles i assegureu-vos que les piles siguin noves.
• Remote not triggering camera: Ensure the cable is securely connected to both the remote and the camera. Verify camera settings allow for remote shutter release.
• Incompatibility with Olympus/OM System Cameras: Please note that despite some listings, the AODELAN TR90 may not be compatible with all Olympus or OM System camera models. Verify compatibility with your specific camera model before use.
• Problemes de visualització: If the display is dim or flickering, replace the batteries.

Especificacions

Figura 6: Physical dimensions and cord length of the AODELAN TR90 remote controller.

Garantia i Suport

For warranty information and technical support, please refer to the documentation provided with your purchase or visit the official AODELAN weblloc web. Conserveu el comprovant de compra per a qualsevol reclamació de garantia.