Introducció
This manual provides comprehensive instructions for the installation, operation, and maintenance of the GeoVision GV-TBL8804 8MP H.265 Super Low Lux WDR Pro Full Color Warm LED IR Bullet IP Camera. The GV-TBL8804 is an outdoor network camera designed for day and night surveillance, featuring an automatic IR-cut filter, one IR LED, and two warm LEDs. It supports H.265 video codec for efficient compression and adheres to IP67 standards for outdoor use. The camera can be powered via Power over Ethernet (PoE) and incorporates AI deep learning algorithms for distinguishing human and vehicle movements, enhancing perimeter protection and real-time alerts when integrated with GeoVision Video Management Software (VMS).
Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet abans de continuar amb la instal·lació.
- GeoVision GV-TBL8804 8MP Bullet IP Camera
- Guia d'instal·lació
- Cargols i ancoratges de muntatge
- Waterproof Connector (for Ethernet cable)
- Software CD (or download link for GV-VMS)
Producte acabatview
The GeoVision GV-TBL8804 camera features a robust design suitable for outdoor environments. Below is an illustration of the camera's main components.
Figura 1: Davant i lateral view of the GeoVision GV-TBL8804 8MP Bullet IP Camera. The image displays the main camera lens, two warm LEDs, and a single IR LED on the front panel. The side shows the GeoVision logo and the adjustable mounting bracket.
Característiques principals:
- 1/2.7" progressive scan super low lux CMOS sensor for superior low-light performance.
- Day and Night function with a removable IR-cut filter for optimal image quality in varying light conditions.
- Built-in micro SD card slot (SD / SDHC / SDXC / UHS-I, Class 10) for local storage of recordings.
- AI deep learning capabilities for AI Perimeter Protection and classification of human and vehicle objects.
- IP67-rated weather-resistant enclosure for outdoor installation.
- Two-way audio support for communication.
- Alarm sound and warm LED light triggered by AI detection events for enhanced security.
Configuració
1. Muntatge de la càmera
- Seleccioneu una ubicació: Choose a suitable outdoor location that provides the desired surveillance coverage and is within range of your network infrastructure. Ensure the mounting surface is sturdy enough to support the camera.
- Forats: Use the provided mounting template (if available) to mark and drill pilot holes for the mounting screws.
- Assegureu el suport: Attach the camera's mounting bracket securely to the surface using the supplied screws and anchors.
- Ajust d'angle: Loosen the adjustment screws on the bracket to position the camera at the desired angle. Tighten the screws once the camera is in place.
2. Connexió d'alimentació i xarxa
- Cable Ethernet: Connect an Ethernet cable from your PoE-enabled network switch or PoE injector to the camera's Ethernet port. Use the waterproof connector to ensure a secure and weather-resistant connection.
- Potència (opcional): If not using PoE, connect a compatible 12V DC power adapter (not included) to the camera's power input.
- Llums indicadores: Observe the camera's indicator lights. A solid green light typically indicates a successful network connection and power.
3. Configuració Inicial
- Instal·lació de programari: Install the GeoVision GV-VMS software on a Windows-based computer connected to the same network as the camera.
- Descobriment de dispositius: Use the GV-VMS software or GeoVision's IP Device Utility to discover the camera on your network.
- Credencials per defecte: Log in to the camera using the default username and password (refer to the separate Quick Start Guide or GeoVision documentation for default credentials).
- Canviar la contrasenya: Per seguretat, canvieu immediatament la contrasenya predeterminada per una contrasenya forta i única.
- Configuració de la xarxa: Configure network settings such as IP address (static or DHCP), subnet mask, and gateway as required by your network environment.
- Configuració de l'hora: Establiu la data i l'hora correctes, preferiblement sincronitzant-les amb un servidor NTP.
Instruccions de funcionament
1. Accessing Live View
- GV-VMS: Open the GeoVision GV-VMS software, add the camera to your device list, and select it to view el feed en directe.
- Web Navegador: Introduïu l'adreça IP de la càmera en un web browser (e.g., Chrome, Firefox) to access its web interface. Log in with your credentials to view the live feed and configure settings.
- Aplicació mòbil: Download and install the GV-Eye mobile application. Add your camera or GV-VMS server to view viu footagi a distància.
2. Configuring Recording
- Local Storage (SD Card): Insert a Class 10 micro SD card into the camera's slot. Format the SD card via the camera's web interface or GV-VMS. Configure recording schedules and event-triggered recording settings.
- NVR/VMS Recording: If using a Network Video Recorder (NVR) or GV-VMS, configure recording settings directly within the NVR/VMS software.
3. Ús de les funcions d'IA
- AI Perimeter Protection: Within the camera's web interface or GV-VMS, define detection zones and set rules for AI perimeter protection. This allows the camera to distinguish between human and vehicle intrusions.
- Activadors d'esdeveniments: Configure actions to be taken upon AI detection, such as sending alerts, triggering alarm sounds, or activating the warm LED lights.
Manteniment
1. Neteja
- Netegeu regularment la lent i la carcassa de la càmera amb un drap suau iamp cloth to remove dust, dirt, or water spots.
- Do not use harsh chemicals or abrasive materials, as these can damage the lens or housing.
2. Actualitzacions de firmware
- Periodically check the GeoVision official weblloc per a actualitzacions de firmware.
- Les actualitzacions de firmware poden proporcionar noves funcions, millores de rendiment i millores de seguretat.
- Follow the instructions provided with the firmware update package carefully to avoid damaging the device.
3. Còpia de seguretat de dades
- If using local SD card storage, regularly back up important recordings to an external storage device or network location.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No image/video feed. | No power, network issue, incorrect IP address. | Check power connection (PoE or adapter). Verify Ethernet cable connection. Ensure camera's IP address is correct and accessible on the network. |
| Mala qualitat d'imatge. | Dirty lens, improper focus, low light conditions. | Clean the camera lens. Check focus settings (if adjustable). Ensure sufficient lighting or verify Day/Night mode is functioning correctly. |
| No es pot accedir a la càmera a través de web navegador. | Incorrect IP address, network firewall, browser compatibility. | Confirm the camera's IP address. Check local firewall settings. Try a different web navegador. |
| AI detection not working. | Incorrect configuration, environmental factors. | Review AI detection zone and rule settings in the camera's interface. Ensure the camera's view is clear and not obstructed. |
Especificacions
| Característica | Detall |
|---|---|
| Nom del model | GV-TBL8804 |
| Resolució de fixes efectius | 8 MP |
| Màxim WebResolució d'imatge de càmera | 8 MP |
| Resolució de captura de vídeo | 1080p (Note: 8MP resolution is for still images/higher quality streams, 1080p might refer to a common streaming resolution) |
| Tecnologia del sensor fotogràfic | CMOS (1/2.7" progressive scan super low lux) |
| Ús interior/exterior | A l'aire lliure |
| Classificació de protecció internacional | IP67 |
| Font d'alimentació | Cable elèctric (compatible amb PoE) |
| Tecnologia de connectivitat | Wireless (refers to IP network connectivity, not Wi-Fi) |
| Protocol de connectivitat | RTSP |
| Tipus de muntatge | Muntatge de paret |
| Factor de forma | Bala |
| Tecnologia de poca llum | Day/Night, Super Low Lux |
| Tipus de font de llum | LED (IR and Warm LED) |
| Tipus d'enfocament | Enfocament automàtic |
| Dimensions de l'article (L x A x A) | 7.4 x 2.8 x 2.8 polzades |
| Pes de l'article | 1 lliures |
| Fabricant | GeoVision INC |
Garantia i Suport
GeoVision products are typically covered by a limited manufacturer's warranty. Please refer to the warranty card included with your product or visit the official GeoVision weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.
For technical support, product inquiries, or service requests, please contact GeoVision customer support through their official website or the contact information provided in your product documentation. Ensure you have your product model number (GV-TBL8804) and serial number ready when contacting support.
GeoVision Official Weblloc: www.geovision.com.tw