Theben 5400130

Theben DIMAX 540 plus B Mini Dimmer Instruction Manual

Model: 5400130

Marca: Theben

1. Introducció

The Theben DIMAX 540 plus B is an ultra-compact, flush-mounted mini dimmer designed for controlling dimmable LED and halogen lamps. Its small size allows for easy installation behind standard push-button switches, making it ideal for retrofitting and renovations. This dimmer operates without a neutral conductor, simplifying wiring. It features optimized settings for LEDs, adjustable minimum brightness, and a memory function to recall the last light setting.

Theben DIMAX 540 plus B mini dimmer with wires and 'electronic waterproof' text

Image 1.1: The Theben DIMAX 540 plus B mini dimmer, highlighting its compact and waterproof design.

2. Informació de seguretat

WARNING: Electrical installation should only be performed by a qualified electrician. Disconnect power at the main circuit breaker before attempting any installation, maintenance, or repair work to prevent electric shock.

  • Assegureu-vos sempre que la font d'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
  • This device is designed for indoor use in dry environments unless otherwise specified for its IP rating. The DIMAX 540 plus B has an IP66 rating, indicating protection against dust and powerful water jets.
  • Do not exceed the maximum load capacity of 150W for LED lamps.
  • Assegureu-vos que totes les connexions siguin segures i que compleixin amb els codis elèctrics locals.
  • Do not attempt to open or repair the device. Refer to qualified personnel for service.

3. Característiques del producte

  • Disseny ultracompacte: Extremely small dimensions (25.5 x 26.4 x 10.4 mm) for easy flush-mounted installation.
  • No Neutral Conductor Required: Simplifies wiring, especially in older installations.
  • Optimized for LEDs: Compatible with dimmable LED lamps from 2-150 W (phase cut).
  • Adjustable Minimum Brightness: Allows fine-tuning for flicker-free dimming with various LED types.
  • Funció de memòria: Stores the last set brightness level and restores it upon next activation.
  • Quick 100% Brightness: Double-click the push-button to instantly reach 100% luminous intensity.
  • Optimized Dimming Speed: Achieves 0% to 100% brightness in 5 seconds.
  • Longitud del cable estès: Supports cable lengths up to 100 m, suitable for three-way switch configurations.
  • Alta seguretat: Features temperature and overcurrent cut-off, and short-circuit protection.
  • Versatile Load Compatibility: Suitable for R (resistive) and C (capacitive) loads (phase cut only).
Theben DIMAX 540 plus B mini dimmer next to a 2 Euro coin, illustrating its compact size

Image 3.1: The compact size of the DIMAX 540 plus B, shown next to a 2 Euro coin.

4. Configuració i instal·lació

Follow these steps for safe and correct installation of your DIMAX 540 plus B mini dimmer:

  1. Desconnecteu l'alimentació: Before starting any electrical work, switch off the main power supply at the circuit breaker to avoid electric shock.
  2. Prepare Installation Location: The dimmer is designed for flush-mounted installation behind a standard push-button switch in a wall box. Ensure there is sufficient space (dimensions: 25.5 x 26.4 x 10.4 mm).
  3. Connexions de cablejat:
    • Connecteu el En directe (L) wire to the dimmer's input.
    • Connecteu el Carrega wire (to the lamp) to the dimmer's output.
    • Connecteu el Canvia d'entrada wire from your push-button switch to the dimmer.
    • Nota: This dimmer does not require a neutral conductor.
Theben DIMAX 540 plus B mini dimmer installed behind a wall switch in a flush-mounted box

Imatge 4.1: Ex.ample of the DIMAX 540 plus B installed behind a standard push-button switch.

  1. Secure the Dimmer: Carefully place the dimmer module into the wall box behind the push-button switch. Ensure no wires are pinched or damaged.
  2. Optional LED Compensation Module: For optimal performance with certain LED lamps and to prevent flickering at low brightness levels, consider installing the optional LED compensation module (Theben item no. 9070825). Refer to the compensation module's instructions for installation.
Theben DIMAX 540 plus B mini dimmer shown with an optional yellow LED compensation module

Image 4.2: The DIMAX 540 plus B with the optional LED compensation module (item no. 9070825).

  1. Restaura l'alimentació: Un cop finalitzada la instal·lació i totes les connexions siguin segures, restableu l'alimentació a l'interruptor.

5. Instruccions de funcionament

The DIMAX 540 plus B dimmer is controlled via a standard push-button switch:

  • Encendre/apagar: A short press (less than 0.4 seconds) of the push-button will switch the light on or off.
  • Dimecres: Press and hold the push-button to dim the light. The brightness will continuously increase or decrease. Release the button when the desired brightness is reached.
  • 100% brillantor: A quick double-click (two short presses within 0.4 seconds) will set the light to 100% luminous intensity.
  • Funció de memòria: The dimmer automatically saves the last set brightness level. When the light is switched on again, it will return to this stored brightness.
  • Configuració de la brillantor mínima: To adjust the minimum brightness level (useful for preventing LED flickering at very low settings), press the push-button five times quickly. The light will then enter a programming mode where you can adjust the minimum level by pressing and holding. Once set, a short press will save the setting.
Two sets of images showing a room with different light levels, demonstrating the dimming capability

Image 5.1: Visual representation of light control and dimming effects in a room.

6. Manteniment

The Theben DIMAX 540 plus B mini dimmer is designed for maintenance-free operation. No user-serviceable parts are inside the device.

  • Neteja: If necessary, gently wipe the surface of the push-button switch (not the dimmer module itself) with a soft, dry cloth. Do not use abrasive cleaners or solvents.
  • Inspecció: Periodically check the installation area for any signs of damage or loose connections. If any issues are found, disconnect power and consult a qualified electrician.
  • Eliminació: Dispose of the device according to local electronic waste regulations at the end of its lifespan.

7. Solució De Problemes

ProblemaCausa possibleSolució
Light does not turn on/off or dim.No power supply, incorrect wiring, faulty lamp, or faulty dimmer.Check power supply at the circuit breaker. Verify wiring connections according to the installation instructions. Test with a known working lamp. If the problem persists, consult a qualified electrician.
LED lamps flicker at low brightness.Incompatibility with specific LED lamps, minimum brightness set too low.Adjust the minimum brightness setting (see Operating Instructions). Consider installing the optional Theben LED compensation module (item no. 9070825). Ensure your LED lamps are explicitly labeled as "dimmable."
Dimmer becomes warm during operation.Normal operation, or overload.A slight warmth is normal. Ensure the total wattage de l connectadaamps does not exceed 150W. If it feels excessively hot or emits smoke/smell, immediately disconnect power and consult an electrician.

8. Especificacions tècniques

EspecificacióValor
ModelDIMAX 540 plus B (5400130)
Vol. Operatiutage230 V AC
Freqüència50 - 60 Hz
Corrent nominal10 Ampere
Wattage (LED)2-150 W
Wattage (Incandescent/Halogen)150 W
Tipus de circuitPhase Cut (R and C loads)
Tipus d'instal·lacióEncastat
Mètode de controlPulsador
Consum en espera<0.36 W
Màx. Longitud del cable100 m
Interval de temperatura ambient-10 °C a +45 °C
Dimensions de l'article (LxWxH)10 x 26 x 25 mm (approx. 25.5 x 26.4 x 10.4 mm)
Pes de l'article30 grams
MaterialPlastic (housing), Copper, Brass (contact material)
Classificació de protecció internacionalIP66
País d'origenAlemanya
Components inclosos1x DIMAX 540 plus B Mini Dimmer
Technical drawing of Theben DIMAX 540 plus B with dimensions 25.5mm, 26.4mm, 10.4mm

Image 8.1: Detailed dimensions of the DIMAX 540 plus B module.

Table showing technical data for DIMAX 540 plus B, including operating voltage, frequency, installation type, stand-by consumption, incandescent/halogen lamp load, LED lamp load, setting, max. cable length, and ambient temperature

Image 8.2: Technical data table for the DIMAX 540 plus B.

9. Garantia i Suport

For warranty information, technical support, or service inquiries, please contact Theben customer service or your local distributor. Keep your purchase receipt as proof of purchase.

For further assistance, please visit the official Theben weblloc web o consulteu la informació de contacte que s'inclou amb l'embalatge del producte.

© 2024 Theben AG. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.