Kinto 20445

Kinto 20445 To-Go Tumbler Instruction Manual

Model: 20445 | Capacity: 12.2 fl oz (360 ml)

Introducció

The Kinto 20445 To-Go Tumbler is designed for convenient beverage enjoyment on the go. Its double-wall stainless steel vacuum construction helps maintain the temperature and flavor of your drinks. The lid features a plug mechanism, allowing for easy sipping without needing to fully open or close the lid each time. This manual provides essential information for the proper use, care, and maintenance of your tumbler.

Kinto 20445 To-Go Tumbler in Silver

Image: The Kinto 20445 To-Go Tumbler in silver, showcasing el seu disseny elegant.

Configuració

  1. Desembalatge: Carefully remove all components from the packaging. Ensure all parts, including the tumbler body and lid with plug, are present.
  2. Neteja inicial: Before first use, wash the tumbler body and lid thoroughly with warm water and a mild dish soap. Rinse all parts completely and allow them to air dry.
  3. Muntatge de la tapa: Ensure the silicone gasket is properly seated within the lid to prevent leaks. The plug mechanism should move freely to open and close the drinking spout.

Instruccions de funcionament

  1. Omplint el got:

    Unscrew the lid from the tumbler body. Pour your desired beverage into the tumbler, ensuring not to overfill. Leave adequate space to prevent spillage when the lid is attached.

  2. Assegurar la tapa:

    Place the lid onto the tumbler body and screw it on clockwise until it is securely tightened. Do not overtighten. Ensure the lid is properly aligned and sealed to prevent leaks.

  3. Beure:

    To drink, simply push the plug mechanism to open the drinking spout. To close, push the plug back into its sealed position. This design allows for convenient one-handed operation.

    Person holding Kinto To-Go Tumbler with lid plug open

    Image: A hand holding the Kinto To-Go Tumbler, demonstrating the open lid plug for drinking.

  4. Retenció de temperatura:

    The double-wall vacuum insulation helps maintain the temperature of your hot or cold beverages for extended periods. For best results, pre-heat or pre-chill the tumbler with hot or cold water for a few minutes before filling with your beverage.

Manteniment i cura

  • Neteja diària: After each use, disassemble the lid and wash all parts (tumbler body, lid, and silicone gasket) with warm water and mild dish soap. Use a soft brush for thorough cleaning of the lid components.
  • Ús del rentavaixelles: The tumbler is machine washable. However, hand washing is recommended for prolonged product life and to maintain the finish. If using a dishwasher, place on the top rack.
  • Assecat: Assegureu-vos que totes les peces estiguin completament seques abans de tornar-les a muntar i emmagatzemar per evitar males olors o floridura.
  • Eviteu els abrasius: No utilitzeu netejadors abrasius, fregalls ni lleixiu, ja que poden danyar l'acabat i els materials.
  • Emmagatzematge: Store the tumbler with the lid removed or slightly ajar to allow for air circulation.
Close-up of Kinto To-Go Tumbler being filled with coffee

Imatge: Un primer pla view of the Kinto To-Go Tumbler being filled with a beverage, illustrating its wide opening for easy cleaning and filling.

Resolució de problemes

Issue: Tumbler leaks when tilted or carried.
Solució:
  • Ensure the lid is screwed on tightly and correctly aligned with the tumbler body.
  • Check that the silicone gasket inside the lid is properly seated and free from debris or damage.
  • Verify that the drinking plug is fully closed and sealed.
Issue: Beverage does not stay hot/cold for the expected duration.
Solució:
  • Ensure the lid is securely closed and the drinking plug is sealed.
  • Pre-heat or pre-chill the tumbler with hot or cold water for 5-10 minutes before adding your beverage.
  • Avoid frequently opening the lid or drinking plug, as this can reduce temperature retention.
Issue: Difficulty cleaning the lid or plug mechanism.
Solució:
  • Disassemble the lid components (if possible, refer to manufacturer's instructions for specific lid disassembly).
  • Use a small brush or cotton swab to clean hard-to-reach areas.
  • Soak the lid in warm, soapy water for a period before scrubbing.

Especificacions

MarcaKinto
Número de model20445
Capacitat12.2 ml
MaterialStainless Steel (Body), Plastic (Lid), Silicone (Gasket)
ColorPlata
Característica especialLeak Proof, Insulated, With Plug
Pes de l'article0.28 quilos
Dimensions (W x H)3.43 cm d'amplada x 5.12 cm d'alçada
Instruccions de curaMachine Washable (Top Rack Recommended)

Garantia i Suport

For detailed warranty information and customer support, please refer to the official Kinto weblloc web o contacteu directament amb el seu servei d'atenció al client. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.

Fabricant: KINTO

Weblloc: kinto.co.jp

© 2024 Kinto. All rights reserved.