1. Introducció
Thank you for choosing the Miliboo Lucien Design Chair. This manual provides essential information for the safe assembly, use, and maintenance of your new chair. Please read these instructions carefully before assembly and retain them for future reference.
Image 1.1: Miliboo Lucien Design Chair in a modern setting. This image shows the chair's elegant design and how it complements a contemporary interior.
2. Informació de seguretat
ADVERTIMENT: Do not exceed the maximum recommended weight of 120 kg (264 lbs). Failure to adhere to this limit may result in damage to the chair or personal injury.
Ensure all assembly instructions are followed correctly to guarantee the stability and safety of the product. Incorrect assembly can lead to instability and potential hazards.
Mantingueu les peces petites i els materials d'embalatge fora de l'abast dels nens durant el muntatge per evitar riscos d'asfíxia.
3. Contingut del paquet
Abans de començar el muntatge, verifiqueu que tots els components siguin presents i no estiguin danyats. Si hi ha alguna peça que falti o que estigui danyada, poseu-vos en contacte amb el servei d'atenció al client.
- 1 x Seat with backrest (Polyurethane and plywood with oak veneer)
- 4 x Legs (Plywood)
- 1 x Hardware pack (screws, washers, Allen key)
4. Muntatge i muntatge
The Miliboo Lucien chair is delivered ready to assemble. Follow these steps carefully:
- Desempaquetar components: Traieu amb cura totes les peces de l'embalatge. Col·loqueu-les sobre una superfície suau i neta per evitar ratllades.
- Identifica les parts: Refer to the included diagram (if available) to identify the seat, legs, and hardware.
- Col·loca les cames: Align each leg with the corresponding mounting points on the underside of the seat frame. Insert the screws from the hardware pack and hand-tighten them initially.
- Cames segures: Once all legs are in place, use the provided Allen key to fully tighten all screws. Ensure they are snug but do not overtighten.
- Comprovar l'estabilitat: Place the assembled chair on a flat surface. Gently apply pressure to ensure it is stable and does not wobble. If it wobbles, re-check the tightness of all screws.
Imatge 4.1: Frontal view of the Miliboo Lucien Design Chair. This image provides a clear view of the chair's seat and backrest design.
Imatge 4.2: Lateral view of the Miliboo Lucien Design Chair. This image highlights the chair's profile and the angle of its legs.
Imatge 4.3: Darrere view of the Miliboo Lucien Design Chair. This image shows the smooth, unadorned back of the chair.
5. Funcionament i ús
The Miliboo Lucien Design Chair is intended for indoor use as a dining chair or accent chair. It is designed for comfortable seating in dining rooms, kitchens, or home office environments.
- Always sit centrally on the seat to distribute weight evenly.
- Eviteu estar dret a la cadira o utilitzar-la com a tamboret.
- Do not drag the chair across floors; lift it to move to prevent damage to legs and flooring.
6. Manteniment
Proper care will extend the life and appearance of your Miliboo Lucien chair.
- Cleaning the Polyurethane Seat: Netegeu amb un suau, damp cloth. For stubborn stains, use a mild soap solution and immediately wipe dry. Avoid abrasive cleaners or solvents.
- Cleaning the Wood Legs/Frame: Dust regularly with a soft, dry cloth. For deeper cleaning, use a wood-specific cleaner and follow its instructions. Avoid excessive moisture.
- Inspecció periòdica: Reviseu periòdicament tots els cargols i connexions per assegurar-vos que romanen ajustats. Torneu a apretar-los si cal.
- Eviteu la llum solar directa: L'exposició prolongada a la llum solar directa pot causar decoloració o danys als materials.
Imatge 6.1: Primer pla view of the Miliboo Lucien Design Chair's seat and wood frame. This image details the texture of the polyurethane and the finish of the oak veneer.
7. Solució De Problemes
Si teniu algun problema amb la cadira, consulteu les solucions habituals següents:
- La cadira tremola: This is typically caused by unevenly tightened screws. Place the chair on a flat surface and systematically tighten all assembly screws. Do not overtighten.
- Sorolls de grinyols: Squeaking can occur if screws are loose. Re-tighten all assembly screws. If the noise persists, disassemble and reassemble the affected joint, ensuring all parts are correctly aligned.
- Ratllades al terra: Ensure felt pads or floor protectors are attached to the bottom of each leg to prevent scratching delicate floor surfaces.
8. Especificacions
Detailed specifications for the Miliboo Lucien Design Chair:
| Característica | Detall |
|---|---|
| Marca | Miliboo |
| Nom del model | LUCIEN |
| Número de model | 52299 |
| Color | Light Wood / White |
| Dimensions totals (L x P x A) | 54 x 57.5 x 81.5 cm (21.3 x 22.6 x 32.1 polzades) |
| Seat Dimensions (L x D x H) | 48 x 43 x 48.5 cm (18.9 x 16.9 x 19.1 polzades) |
| Backrest Dimensions (L x H) | 44 x 39 cm (17.3 x 15.4 polzades) |
| Material del seient | Polyurethane (PU) - Poplar plywood with oak veneer |
| Material de la cama | Contraxapat d'àlber |
| Seat Density | 30 kg/m3 |
| Backrest Density | 24 kg/m3 |
| Pes màxim suportat | 120 kg (264 lliures) |
| Pes de l'article | 10.3 kg (22.7 lliures) |
| Muntatge obligatori | Sí |
| Ús recomanat | Menjador |
| País d'origen | Xina |
Image 8.1: Miliboo Lucien Design Chair with key dimensions. This image visually represents the chair's height, width, and depth.
9. Garantia i Suport
Your Miliboo Lucien Design Chair is covered by legal guarantees. Miliboo offers a 30-day return policy and specialized customer support.
For any questions, missing parts, or assistance with assembly or product issues, please contact Miliboo customer support. You can find more information and contact details on the official Miliboo store page: