1. Producte acabatview
The Pokitter PKT-PTC1200 is a compact and efficient ceramic fan heater designed to provide rapid and comfortable warmth. Featuring advanced PTC ceramic heating technology, it offers energy-saving operation, multiple safety features, and a quiet, light-free heating experience. Its portable design makes it suitable for various indoor environments.
Figure 1.1: The Pokitter PKT-PTC1200 ceramic heater in operation, demonstrating its wide oscillation and warm air output.
2. Informació de seguretat
Llegiu atentament totes les instruccions de seguretat abans d'utilitzar aquest aparell. Si no seguiu aquestes instruccions, podeu patir descàrregues elèctriques, incendis o lesions greus.
- Col·loqueu sempre l'escalfador sobre una superfície ferma i anivellada.
- Do not cover the heater or block the air inlets/outlets.
- Mantingueu els materials inflamables a una distància mínima d'1 metre (3 peus) de l'escalfador.
- No utilitzeu en banys, bugaderies o llocs humits similars.
- Desendolleu l'escalfador quan no l'utilitzeu o abans de netejar-lo.
- This appliance is equipped with an automatic tip-over switch and overheat protection for enhanced safety.
Figure 2.1: Key safety features of the PKT-PTC1200 heater, including rapid heat dissipation, automatic tip-over shut-off, overheat protection, and the use of flame-retardant ABS material.
3. Configuració
Setting up your Pokitter ceramic heater is quick and easy.
- Desembalar: Traieu amb cura l'escalfador del seu embalatge. Conserveu l'embalatge per a futurs emmagatzematges o transports.
- Col·locació: Place the heater on a stable, flat, and heat-resistant surface. Ensure there is at least 1 meter (3 feet) of clear space around the heater to allow for proper airflow and prevent overheating.
- Connexió d'alimentació: Connecteu el cable d'alimentació a una presa de corrent estàndard. Assegureu-vos que el volumtage matches the heater's requirements (refer to specifications).
Figure 3.1: The heater and its packaging, ready for setup.
4. Instruccions de funcionament
The Pokitter PKT-PTC1200 heater features intuitive controls for ease of use.
4.1 Encès/Apagat
Press the power button on the top panel to turn the heater on or off. The heater will begin operating in the last used mode or default to a low heat setting.
Figure 4.1: Operating the control panel on the top of the heater.
4.2 Configuració de calor
The heater offers three heat settings:
- Fan Only (7W): Circula l'aire sense calor.
- Calor baix (700 W): Provides gentle warmth for smaller spaces or energy saving.
- Calor elevat (1200 W): Delivers maximum warmth for quick heating of larger areas.
Cycle through the settings using the mode button on the control panel.
Figure 4.2: The heater's three power modes and 80-degree oscillation feature.
4.3 Funció d'oscil·lació
Press the oscillation button to activate the 80-degree wide-angle oscillation, distributing heat more evenly across the room. Press again to stop oscillation.
Figure 4.3: The heater's oscillation feature in action.
4.4 Funció de temporitzador
The built-in 12-hour timer allows you to set the heater to automatically turn off after a specified period. Press the timer button repeatedly to select the desired duration.
Figure 4.4: The 12-hour timer function for convenient operation.
5. Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga vida útil del vostre escalfador.
- Neteja: Before cleaning, always unplug the heater and allow it to cool down completely. Use a soft, damp drap per netejar les superfícies exteriors. No utilitzeu productes de neteja abrasius ni dissolvents.
- Emmagatzematge: Quan no l'utilitzeu, guardeu l'escalfador en un lloc fresc i sec, preferiblement en el seu embalatge original, per protegir-lo de la pols i els danys.
- Entrada/sortida d'aire: Periodically check and clean the air inlets and outlets to ensure they are free from dust and debris, which can impede airflow and reduce efficiency.
6. Solució De Problemes
Si teniu problemes amb el vostre escalfador, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| L'escalfador no s'encén. | Sense alimentació, interruptor antibolcada activat o protecció contra sobreescalfament activada. | Check power cord connection. Ensure heater is upright. Unplug and allow to cool for 30 minutes before restarting. |
| Sense sortida de calor. | Fan-only mode selected, or heating element issue. | Ensure a heat mode (700W or 1200W) is selected. If problem persists, contact customer support. |
| L'escalfador s'atura inesperadament. | Protecció contra sobreescalfament o interruptor antibolcada activat. | Check for obstructions around the heater. Ensure it is on a stable surface. Allow to cool down. |
| Soroll inusual. | Dust buildup or internal component issue. | Clean air inlets/outlets. If noise persists, discontinue use and contact customer support. |
If the problem is not listed or persists after attempting the solutions, please contact Pokitter customer support.
7. Especificacions
| Característica | Detall |
|---|---|
| Número de model | PKT-PTC1200 |
| Marca | Pokitter |
| Potència de sortida | 7W (Fan), 700W (Low Heat), 1200W (High Heat) |
| Angle d'oscil·lació | 80° |
| Temporitzador | Fins a 12 hores |
| Característiques de seguretat | Overheat Protection, Tip-over Auto-Off (30°), Flame-retardant ABS material |
| Dimensions (L x A x A) | Aproximadament 21 x 21 x 45 cm (8.3 x 8.3 x 17.7 polzades) |
| Pes | Aproximadament 2.25 kg (4.96 lliures) |
| Color | Blanc |
8. Garantia i Suport
Pokitter products are designed for reliability and performance. For warranty information and customer support, please refer to the warranty card included in your product packaging or visit the official Pokitter website. Please have your model number (PKT-PTC1200) and purchase date ready when contacting support.
Per a més ajuda, també podeu consultar la Pokitter Brand Store on Amazon.
