HYUNDAI WS 1070 B Weather Station

1. Introducció

The HYUNDAI WS 1070 B is a compact weather station designed to provide accurate indoor and outdoor temperature readings, along with humidity information. It also features an integrated clock with an alarm function, making it a versatile device for your home or office. The large LCD ensures clear digital display of all values and functions.

Aquest manual proporciona instruccions detallades per configurar, utilitzar i mantenir l'estació meteorològica per garantir un rendiment òptim.

2. Contingut del paquet

• HYUNDAI WS 1070 B Main Unit
• Sensor exterior sense fils
• Manual d'usuari (aquest document)

Nota: Les piles no estan incloses i s'han de comprar per separat.

3. Producte acabatview

3.1 Unitat principal

The main unit features a large LCD display showing indoor and outdoor temperatures, time, and alarm status. Control buttons are located below the display.

Imatge 1: Frontal view of the HYUNDAI WS 1070 B main unit, displaying indoor and outdoor temperatures, time, and day of the week. Buttons for 'SET', 'CH', 'UP', 'DOWN', 'ALARM', and 'SNZ' are visible below the screen.

• Pantalla LCD: Shows time, date, indoor/outdoor temperature, humidity, and alarm status.
• Botó SET: Enters setting mode for time, date, and other parameters.
• Botó CH: Selects display channel for multiple outdoor sensors (if additional sensors are connected).
• Botons UP/DOWN: Adjusts values during setting mode or cycles through display options.
• Botó ALARMA: Enters alarm setting mode or activates/deactivates the alarm.
• SNZ (Snooze) Button: Activa la funció de repetició de l'alarma quan sona l'alarma.

3.2 Sensor exterior sense fil

The wireless sensor transmits outdoor temperature data to the main unit. It features a small display for local temperature readings and a channel selector.

Imatge 2: Lateral view of the HYUNDAI WS 1070 B wireless outdoor sensor, showing its compact black casing and a small display indicating 'CH1' and the current temperature. A 433MHz signal icon is also visible.

• Visualització de la temperatura: Shows the current temperature measured by the sensor.
• Selector de canals: Allows selection of the transmission channel (1, 2, or 3) to avoid interference with other sensors.
• Compartiment de la bateria: Situat a la part posterior per a la instal·lació de la bateria.

4. Configuració

4.1 Instal·lació de la bateria

1. Unitat principal: Open the battery compartment on the back of the main unit. Insert 2 x 1.5V AAA batteries, observing the correct polarity (+/-). Close the compartment.
2. Sensor exterior sense fil: Open the battery compartment on the back of the sensor. Insert 2 x 1.5V AAA batteries, observing the correct polarity (+/-). Close the compartment.

4.2 Initial Setup and Synchronization

1. After installing batteries in both the main unit and the outdoor sensor, the main unit will automatically begin searching for the sensor signal. This process may take a few minutes.
2. Ensure the outdoor sensor is within effective transmission range (typically up to 30 meters in open air) and not obstructed by thick walls or large metal objects.
3. Once synchronized, the outdoor temperature will appear on the main unit's display. If synchronization fails, remove and reinsert batteries in both units, then try again.

4.3 Col·locació del sensor

For accurate outdoor temperature readings, place the wireless sensor in a sheltered location away from direct sunlight and rain. Avoid placing it near heat sources (e.g., vents, windows) or reflective surfaces that could affect temperature measurements. Ensure it is mounted vertically for proper drainage.

5. Instruccions de funcionament

5.1 Configuració de l'hora i la data

1. Manteniu premut el botó SET button for approximately 3 seconds to enter time setting mode. The hour digit will start flashing.
2. Utilitza el UP or ABAIX botons per ajustar l'hora.
3. Premeu SET again to confirm the hour and move to setting the minutes.
4. Repeat the process using UP/ABAIX for minutes, then SET to cycle through year, month, and day settings.
5. Premeu SET una última vegada per sortir del mode de configuració.

5.2 Configuració de l'alarma

1. Premeu el botó ALARMA botó una vegada per mostrar l'hora d'alarma actual.
2. Manteniu premut el botó ALARMA button for approximately 3 seconds to enter alarm setting mode. The alarm hour digit will flash.
3. Utilitza el UP or ABAIX botons per ajustar l'hora de l'alarma.
4. Premeu ALARMA again to confirm the hour and move to setting the alarm minutes.
5. Utilitza el UP or ABAIX botons per ajustar els minuts de l'alarma.
6. Premeu ALARMA una última vegada per confirmar i sortir del mode de configuració de l'alarma.
7. Per activar o desactivar l'alarma, premeu la tecla ALARMA button briefly when the alarm time is displayed. An alarm icon will appear/disappear on the LCD.

5.3 Funció de repetició

Quan soni l'alarma, premeu el botó SNZ button to activate the snooze function. The alarm will temporarily stop and sound again after a few minutes (typically 5-10 minutes, depending on the model's default setting). To turn off the alarm completely, press any other button (e.g., ALARM, SET, UP, DOWN).

5.4 Selecció de la unitat de temperatura

The weather station displays temperature in Celsius (°C). There is no explicit mention of Fahrenheit (°F) conversion in the product description. If available, this option is usually found within the SET menu or by a dedicated button on the back of the unit.

5.5 Selecció de canals (per a diversos sensors)

If you have purchased additional outdoor sensors (up to three are supported), press the CH button repeatedly to cycle through the channels (CH1, CH2, CH3) and view the temperature from each connected sensor. The main unit will automatically scan and display data from active channels.

6. Manteniment

• Neteja: Wipe the main unit and sensor with a soft, slightly damp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar la pantalla o laasing.
• Substitució de la bateria: Replace batteries in both the main unit and the outdoor sensor when the display becomes dim or readings become erratic. Always replace all batteries at the same time with new ones of the same type.
• Emmagatzematge: Si no heu d'utilitzar el dispositiu durant un període prolongat, traieu-ne les piles per evitar fuites i corrosió.

7. Solució De Problemes

8. Especificacions

9. Garantia i Suport

For warranty information or technical support, please refer to the documentation provided at the time of purchase or contact your retailer. You may also visit the official HYUNDAI Electronics weblloc web per obtenir les dades de contacte del servei d'atenció al client.