1. Producte acabatview
The Hooke Road Gladiator Running Boards Side Steps are designed to provide enhanced accessibility and undercarriage protection for your 2020-2026 Jeep Gladiator JT. These cab-length side steps feature a curved steel tube design that integrates seamlessly with the vehicle's body lines, offering a rugged off-road appearance with delicate hollowed-out star logos.
Constructed from durable carbon steel, these running boards are engineered for longevity. They feature a dual-layer protection system: an E-coating process applied inside and out for superior corrosion resistance, followed by a textured black powder coat finish for added durability and a stylish look. The steps include 6.2-inch wide non-slip step pads to ensure secure entry and exit.
Image 1.1: Cab-length side steps with curved steel tube design installed on a Jeep Gladiator.
Image 1.2: Detail of the durable 6.2-inch wide non-slip step pads.
Image 1.3: Construction details highlighting carbon steel, E-coat, and textured powder coat finish for durability.
Vídeo del producte
Video 1.1: An official Hooke Road video showcasing various products and the brand's commitment to outdoor adventures.
2. Contingut del paquet
Please verify that all components are present and undamaged before beginning installation. If any parts are missing or damaged, contact Hooke Road customer support.
- 1 x Set of Side Steps (Driver & Passenger Side)
- 6 x Brackets de muntatge
- 1 x Kit de maquinari de muntatge
- 1 x Installation Instruction (this manual)
3. Instruccions d'instal·lació
This product features a simple bolt-on installation process, utilizing your vehicle's factory mounting points. No drilling is required. It is recommended to have a second person assist with the installation.
Eines necessàries (no incloses):
- Trinquet
- Conjunt de claus d'endoll
- Allen Wrench Set (if applicable for hardware)
Notes prèvies a la instal·lació:
- Assegureu-vos que el vehicle estigui aparcat en una superfície plana i que el motor estigui apagat.
- If your Jeep Gladiator JT is equipped with factory running boards or rock sliders, these must be removed prior to installing the Hooke Road side steps.
- Identify the driver side and passenger side running boards. The longer gap on the running board should typically align with the front door, which is wider. This ensures proper alignment with the factory bolt holes.
Guia pas a pas:
- Identificar els components: Separate the driver and passenger side running boards. Refer to Image 3.1 to distinguish between the two. Also, identify the mounting brackets (A, B, C) and corresponding hardware.
- Parèntesis de posició: Attach the appropriate mounting brackets to the factory mounting points on the vehicle's frame. Do not fully tighten the hardware at this stage; allow for some adjustability.
- Fixeu els estribos: Carefully lift the running board into position and align it with the installed mounting brackets. Secure the running board to the brackets using the provided hardware. Again, do not fully tighten yet.
- Ajustar i alinear: With all hardware loosely installed, adjust the running board for optimal fitment and alignment with the vehicle's body. Ensure the step is level and positioned correctly.
- Ajustament final: Once satisfied with the alignment, progressively tighten all bolts, starting from the center and working outwards. IMPORTANT: Do NOT over-tighten the bolts. Over-tightening can strip the bolt heads or damage the mounting points. Use a hand ratchet for final tightening to ensure a secure fit without excessive force.
- Repetiu per a l'altre costat: Follow the same steps for the opposite side of the vehicle.
Imatge 3.1: acabatview of the bolt-on installation and bracket placement.
Image 3.2: Identification of Passenger Side and Driver Side running boards.
4. Pautes d'ús
These running boards are designed to assist with vehicle entry and exit and provide side protection. While robust, they are not intended for use as a primary lifting point for the vehicle or for extreme rock crawling where direct impact on the step surface is expected. Always step onto the designated non-slip pads for secure footing.
The maximum recommended weight limit for these side steps is 80 pounds per step. Exceeding this limit may cause damage to the product or vehicle mounting points.
5. Manteniment
To ensure the longevity and appearance of your Hooke Road running boards, follow these maintenance guidelines:
- Neteja regular: Wash the running boards regularly with mild automotive soap and water to remove dirt, mud, and road grime. Avoid abrasive cleaners or harsh chemicals that could damage the textured powder coat finish.
- Inspeccionar el maquinari: Periodically check all mounting hardware for tightness. Vibrations from driving can sometimes loosen bolts over time. Re-tighten any loose bolts to the recommended torque specifications (refer to your vehicle's service manual for general torque guidelines for similar fasteners, or consult a professional).
- Comproveu si hi ha danys: Inspect the running boards for any signs of damage, such as dents, scratches, or corrosion. Minor scratches on the powder coat can be touched up with appropriate paint to prevent rust.
- Resistència a la corrosió: The E-coating provides excellent corrosion resistance, but regular cleaning and inspection are still important, especially in areas exposed to road salt or harsh weather conditions.
6. Solució De Problemes
Si teniu problemes durant o després de la instal·lació, tingueu en compte el següent:
- Problemes d'ajust: If bolt holes do not align perfectly, ensure the correct running board (driver vs. passenger side) is on the correct side and oriented properly (longer gap typically towards the front door). Slight adjustments to the loosely fitted brackets may be necessary before final tightening.
- Stripped Bolts: Avoid over-tightening hardware. If a bolt head strips, it may need to be carefully extracted and replaced. It is advisable to have spare hardware on hand or contact a professional for assistance.
- Loose Steps: If the steps feel loose after installation, re-check all mounting hardware for proper tightness. Ensure all bolts are securely fastened to the vehicle's frame and the running boards.
7. Especificacions
| Característica | Especificació |
|---|---|
| Número de model | BXG.7002AB-S |
| Compatibilitat | Jeep Gladiator JT 2020-2026 |
| Material | Acer al carboni |
| Acabar | Textured Black Powder Coat with E-coating |
| Dimensions de l'article (L x A x A) | 86.9 x 7.6 x 5.5 polzades |
| Pes de l'article | Approximately 80 lbs (per pair) |
| Weight Limit (per step) | 80 lliures |
| Step Pad Width | 6.2 polzades |
Image 7.1: Key dimensions of the running boards when installed.
8. Garantia i Suport
Hooke Road provides a manufacturer warranty for 2 anys from the date of purchase for these running boards. This warranty covers defects in materials and workmanship under normal use.
For any questions, concerns, or support needs regarding your Hooke Road Gladiator Running Boards, please contact Hooke Road customer support. Lifetime customer support is available to assist you with product inquiries, installation guidance, and warranty claims.
Si us plau, conserveu el comprovant de compra per motius de garantia.
