UUPAS LED Infrared Red Facial Light Therapy Device U10 User Manual

1. Producte acabatview

The UUPAS LED Infrared Red Facial Light Therapy Device U10 is designed for facial skin care, utilizing both LED red light and far-infrared light. This multi-functional device incorporates a thermostatic sensor probe and a timing function for controlled and effective use.

Figure 1: UUPAS LED Infrared Red Facial Light Therapy Device U10 with charging base.

Característiques principals:

• Tecnologia de doble llum: Features 30 pieces of 625nm red light and 4 pieces of 850nm far-infrared light. The far-infrared light is invisible to the human eye.
• Thermostatic Sensor Probe: Automatically activates upon skin contact and maintains a maximum temperature of 50.5°C.
• Funció de cronometratge: An integrated timer displays usage duration.
• Funcionament sense fil: Equipped with a base socket for convenient charging and wireless use.

Figura 2: Detallada view of the device highlighting LED lights, timer display, and charging options.

2. Informació de seguretat

Si us plau, llegiu atentament totes les instruccions abans d'utilitzar el dispositiu. Conserveu aquest manual per a futures consultes.

• No utilitzeu el dispositiu sobre pell lesionada, irritada o infectada.
• Avoid direct eye contact with the LED lights.
• If you experience any discomfort, redness, or irritation, discontinue use immediately.
• Consult a healthcare professional before use if you have any underlying skin conditions, are pregnant, or have electronic implants.
• Mantenir fora de l'abast dels nens.
• No submergiu el dispositiu en aigua o cap altre líquid.
• Ensure the device is fully charged before use to prevent interruptions.
• The device generates warmth. Do not stay on the same area for too long to avoid overheating. Move the device continuously.

3. Configuració i càrrega

Càrrega del dispositiu:

The UUPAS U10 device is equipped with a rechargeable lithium-ion battery. Before first use, fully charge the device.

1. Connect the charging cable to either the direct charging port on the device or the base charging port.
2. Plug the other end of the charging cable into a suitable USB power adapter (not always included, check packaging).
3. El dispositiu indicarà l'estat de càrrega (per exemple, un indicador lluminós).
4. Un cop estigui completament carregat, desconnecteu el dispositiu de la font d'alimentació.

Figure 3: Device on its charging base.

Figure 4: Illustration of the two charging options for the device.

4. Instruccions de funcionament

For optimal results, use the device 2-3 times a week for 20-28 minutes per session, spending 5-7 minutes per facial area.

Ús pas a pas:

1. Preparació: Ensure your skin is clean and dry. You may apply your preferred skincare products before use, as the device can enhance absorption.
2. Encès: Press the power button (often indicated by a green light). Wait for 3-5 seconds for the device to initialize. The timing display will turn on, and the red light on the probe may flash. The button indicators are:
       01 Green Button: Enceneu la màquina.
       02 Red Button: Timing display turns on.
       03 Yellow Button: The red light on the probe flashes.
       04 Green Button: Normal use in contact with skin.
   

   Figure 5: Powering on the device and initial indicators.
3. Aplicació: Gently place the probe head completely against your skin. The device will automatically activate upon contact, and the red and infrared lights will begin working.
   

   Figure 6: Applying the device to the skin.

4. Tractament: Move the device in a circular motion across the desired facial areas. Do not keep the device stationary on one spot for too long to prevent excessive heat buildup. The built-in timer will help you monitor your session duration.
   

   Figure 7: Using the device in circular motions.

5. Finalització: After your session, press the power button to turn off the device.

Consells importants d'ús:

• The device only operates when the probe head is in full contact with the skin. Keep it close to your skin during use.
• If the device is low on power, the probe may remain on until it automatically turns off. Recharge the device fully to continue use.
• Using skincare products can enhance the device's effectiveness and help prevent overheating.

5. Manteniment i cura

Neteja del dispositiu:

Regular cleaning ensures hygiene and prolongs the device's lifespan.

1. Després de cada ús, apagueu el dispositiu.
2. Gently wipe the probe head with a clean paper towel or a cotton ball.
3. Ensure the probe is dry before storing the device.
4. No utilitzeu netejadors abrasius ni productes químics durs.

Figure 8: Cleaning the device probe after use.

Emmagatzematge:

Guardeu el dispositiu en un lloc fresc i sec, allunyat de la llum solar directa i de temperatures extremes.

6. Solució De Problemes

7. Especificacions

• Número de model: U10
• Dimensions del producte: 2.09 x 2.09 x 8.07 polzades
• Pes: 1.26 lliures
• Longituds d'ona de la llum: 625nm (Red Light), 850nm (Far-Infrared Light)
• Recompte de LED: 30x 625nm Red Light, 4x 850nm Far-Infrared Light
• Temperatura màxima: 50.5°C (Thermostatic Sensor Probe)
• Bateria: 1 bateria de ions de liti (inclosa)
• Fabricant: UUPAS
• UPC: 735626282423
• ASIN: B0BKGDQRTK

8. Garantia i Suport

For warranty information, technical support, or any inquiries regarding your UUPAS LED Infrared Red Facial Light Therapy Device U10, please contact UUPAS customer service. Refer to the product packaging or the official UUPAS weblloc per obtenir dades de contacte.

Conserveu el vostre comprovant de compra per a reclamacions de garantia.