VLAND LED Headlights Instruction Manual

1. Producte acabatview

These VLAND LED Headlights feature integrated LED light bars for Daytime Running Lights (DRL), low beam, high beam, and sequential turn signals. The design incorporates fiber optic elements and dynamic animation upon vehicle lock/unlock.

Components inclosos:

• One (1) Driver side headlight assembly
• One (1) Passenger side headlight assembly
• One (1) Wiring harness pack

Image: VLAND LED Headlight Assembly, showing the complete unit.

Image: Comparison of a vehicle with original headlights (top) and with VLAND LED Headlights installed (bottom).

2. Informació important de seguretat

Always disconnect the vehicle's battery before performing any electrical work. Exercise caution when working with automotive components. Professional installation is recommended to ensure proper function and safety. Refer to your vehicle's service manual for specific procedures and torque specifications.

3. Guia d'instal·lació

Comprovacions prèvies a la instal·lació:

• Comproveu que tots els components estiguin presents i sense danys.
• Confirm compatibility with your vehicle model and year.
• Assegureu-vos que el vehicle estigui aparcat en una superfície plana amb el motor apagat i el fre d'estacionament accionat.

Passos d'instal·lació (generals):

1. Desconnecteu el terminal negatiu de la bateria del vehicle.
2. Remove the front bumper and any other components necessary to access the factory headlight assemblies. Consult your vehicle's service manual for detailed removal instructions.
3. Disconnect the wiring harnesses from the factory headlight assemblies.
4. Remove the factory headlight assemblies.
5. Connect the VLAND LED Headlight assemblies to the vehicle's wiring harnesses. Ensure all connections are secure.
6. Install the new VLAND LED Headlight assemblies into the vehicle.
7. Torneu a connectar el terminal negatiu de la bateria del vehicle.
8. Test all lighting functions (DRL, low beam, high beam, turn signals) before reassembling the bumper.
9. Reinstall the front bumper and any other removed components.

Imatge: Part posterior view of the headlight assembly, indicating the main plug, ACC plug, and adjustment screws for vertical and horizontal aiming.

Installation Video Reference:

Video: This video demonstrates the installation process and functionality of VLAND LED Headlights for compatible Subaru Impreza/WRX STI models.

4. Funcionament

The VLAND LED Headlights offer several lighting functions:

• Daytime Running Lights (DRL): White LED lighting with dynamic animation. Activates when the vehicle is turned on.
• Llum d'encreuament: Provides standard forward illumination.
• Llum de carretera: Provides enhanced forward illumination.
• Senyals de gir: Amber LED lighting with a sequential indicator function.
• Dynamic Animation: A choreographed light sequence activates when the vehicle is locked or unlocked. This feature can be disabled by unplugging the ACC plug located at the rear of the headlight assembly (refer to Installation Guide image).

Image: Displays the various lighting modes: DRL with dynamic animation, LED low beam, LED high beam, and turn signal with sequential illumination.

Image: Illustrates the sequential turn signal indicator and the dynamic animation sequence that activates upon engine start.

Imatge: Detallada view of the DRL, low beam, high beam, and turn signal light patterns.

5. Headlight Adjustment

After installation, it is important to properly aim your headlights to ensure optimal visibility and to avoid blinding oncoming traffic. The VLAND LED Headlights feature adjustment screws on the rear of the assembly for both vertical (up/down) and horizontal (left/right) aiming. Use a headlight aiming tool or follow local regulations for proper adjustment procedures.

Refer to the "Installation Guide" section and the corresponding image for the location of the adjustment screws.

6. Manteniment i cura

Neteja:

Clean the headlight lenses with a soft cloth and mild automotive-approved cleaning solution. Avoid abrasive cleaners or harsh chemicals that could damage the lens material.

Addressing Moisture/Fogging:

Condensation inside headlight assemblies can occur due to temperature differences. This is often a temporary condition. If moisture persists, consider the following:

• Aplicació de calor: Applying gentle heat with a hairdryer or heat gun can help dry out the lenses.
• Exposició a la llum solar: Remove headlight bulbs and dust caps, then park the vehicle in direct sunlight.
• Eviteu la humitat: Keep the vehicle away from excessive moisture, especially after washing. Allow headlights to dry naturally.

Image: Explains common reasons for moisture accumulation inside headlight assemblies, such as temperature changes and damp parking conditions.

Image: Provides methods to clear foggy headlights, including heat application, sunlight exposure, and avoiding moisture.

Característiques de durabilitat:

These headlights are designed with:

• Classificació impermeable IP67: Utilizes premium sealant to prevent water ingress and condensation.
• Disseny a prova de pols: Protects internal components from dust and debris.
• Shock-proof Construction: Engineered to withstand road vibrations and minor impacts.

Image: Highlights the waterproof (IP67), dust-proof, and shock-proof features of the headlights.

7. Solució De Problemes

Problemes comuns:

• Llums que no funcionen: Check all wiring connections and vehicle fuses. Ensure the ACC plug for dynamic animation is securely connected if desired.
• Persistent Condensation: Refer to the "Maintenance and Care" section for solutions. If the issue persists after following recommended steps, contact support.
• Dynamic Animation Not Working: Verify the ACC plug is connected.

If you encounter any issues not covered here, please refer to the Warranty and Support section for contact information.

8. Especificacions

9. Garantia i Suport

Informació de la garantia:

This VLAND product is covered by a garantia d'un any from the original purchase date against manufacturing defects. Please retain all packaging, labels, and user manuals.

Atenció al client:

For any questions, assistance, or warranty claims, please contact VLAND US directly. When contacting support, provide the product label, video, and picture proof clearly showing any defect.

Refer to the seller's contact information on the platform where the product was purchased.