Manual d'usuari de l'afaitadora elèctrica Philips Sèrie 9000 S9696/50

1. Introducció

Welcome to the Philips Series 9000 Electric Shaver S9696/50. This manual provides essential information for the safe and effective use, maintenance, and care of your new shaver. Please read these instructions thoroughly before first use and keep them for future reference.

Image 1.1: The Philips Series 9000 Electric Shaver S9696/50.

2. Informació de seguretat

Per garantir un funcionament segur, observeu sempre les precaucions següents:

• Always unplug the shaver before cleaning or if not in use.
• Keep the shaver away from water when plugged in. This appliance is designed for wet and dry use, but the charging adapter must remain dry.
• Do not use the shaver if it is damaged.
• Clean the shaver thoroughly after each use and dry it completely to prevent bacterial growth.
• Exercise caution when shaving, as skin irritation may occur, especially during initial uses.
• Aquest aparell no està pensat per ser utilitzat per persones amb capacitats físiques, sensorials o mentals reduïdes, o amb manca d'experiència i coneixements, tret que hagin rebut la supervisió o instruccions sobre l'ús de l'aparell per una persona responsable de la seva seguretat.

3. Contingut del paquet

Your Philips Series 9000 Electric Shaver S9696/50 package includes the following items:

• Philips Series 9000 Shaver Body
• Pod de neteja ràpida
• Cartutx de càpsula de neteja ràpida
• Estoig d'emmagatzematge
• Cable de càrrega
• Adaptador de càrrega USB
• Raspall de neteja

Image 3.1: All items included in the Philips Series 9000 Shaver package.

4. Configuració

4.1 Càrrega de la màquina d'afaitar

1. Connect the charging cable to the shaver and the USB charging adapter.
2. Connecteu l'adaptador a una presa de corrent.
3. The battery indicator on the shaver will show charging progress. A full charge typically takes approximately 1 hour and provides up to 60 minutes of shaving time.

4.2 Initial Cleaning (Quick Clean Pod)

For optimal hygiene and performance, it is recommended to clean the shaver using the Quick Clean Pod before first use or after several shaves.

1. Open the Quick Clean Pod and insert a fresh Quick Clean Pod Cartridge.
2. Place the shaver head-down into the Quick Clean Pod.
3. The cleaning cycle will start automatically, powered by the shaver's battery. The cleaning process takes approximately 1 minute.
4. After cleaning, remove the shaver and allow it to air dry.

Image 4.1: The Philips Shaver placed in the Quick Clean Pod for cleaning.

5. Instruccions de funcionament

5.1 Tècniques d'afaitat

The Philips Series 9000 Shaver is designed for both wet and dry shaving. For best results, ensure your skin is clean before shaving.

• Afaitat en sec: Per a un afaitat ràpid i còmode, utilitzeu l'afaitadora sobre la pell seca.
• Afaitat humit: For a more comfortable shave, use with shaving foam or gel. This can help reduce skin irritation.

Move the shaver in small, circular motions over your face, applying gentle pressure. The 360-D Flexhead adapts to the contours of your face, ensuring maximum skin contact and reducing missed hairs.

Image 5.1: The 360-D Flexhead design, which conforms to facial contours.

5.2 SkinIQ Technology

The shaver features SkinIQ Technology, which senses your beard density 125 times per second and automatically adjusts the motor power to match the thickness of your whiskers. This ensures an efficient and comfortable shave, even in dense areas.

Image 5.2: Diagram illustrating the SkinIQ Technology sensing beard density.

5.3 Super Lift & Cut Technology

Equipat amb Super Lift & Cut Technology, the shaver's 72 self-sharpening blades work in two stages: the first blade lifts the hair, and the second blade cuts it below skin level for a close and smooth shave. The micro-bead coating on the shaving head reduces friction by 25% compared to non-coated materials, minimizing skin irritation.

Imatge 5.3: Primer pla view of the shaver blades, highlighting the Super Lift & Cut mechanism.

Image 5.4: Illustration of the micro-bead coating for reduced skin friction.

6. Manteniment

6.1 Neteja diària

After each shave, rinse the shaver head under warm running water. For a more thorough clean, detach the shaving head and rinse both the head and the shaver body. Allow all parts to air dry completely before reassembling.

6.2 Quick Clean Pod Cleaning

For a deeper clean and lubrication, use the Quick Clean Pod regularly (e.g., once a week or as needed). Follow the steps outlined in Section 4.2. Replace the Quick Clean Pod Cartridge when indicated or after approximately 30 cleaning cycles.

6.3 Replacing Shaving Heads

For optimal performance, it is recommended to replace the shaving heads every 12 months. Replacement heads can be purchased from authorized Philips retailers or online.

7. Solució De Problemes

• L'afaitadora no s'encén: Ensure the shaver is fully charged. If the issue persists, try a different power outlet or charging cable.
• Mal rendiment d'afaitat: Clean the shaving heads thoroughly. If performance does not improve, the shaving heads may need to be replaced.
• Irritació de la pell: Ensure you are using proper shaving technique (gentle circular motions). Consider wet shaving with foam or gel. If irritation persists, consult a dermatologist.
• Quick Clean Pod not working: Ensure the shaver is correctly placed in the pod and the cartridge is properly inserted. Check if the shaver has sufficient battery charge.

8. Especificacions

9. Garantia i Suport

This Philips product comes with a standard manufacturer's warranty. Please refer to the warranty card included in your package for specific terms and conditions, or visit the official Philips website for detailed warranty information and product registration.

For technical support, replacement parts, or further assistance, please visit the Philips support website or contact their customer service. You can find contact information on the Philips weblloc web o a la documentació que s'inclou amb el producte.

Assistència en línia: www.philips.com/support