Introducció
This manual provides instructions for the installation, operation, and maintenance of the Robertshaw RS9110T Pro Series 5-1-1 Programmable Touchscreen Thermostat. This single-stage thermostat is designed for 1 Heat and 1 Cool systems, offering programmable control for your HVAC system.
Figure 1: Robertshaw RS9110T Thermostat with Display On
The RS9110T features a large 8.8-square-inch blue backlit touchscreen display for clear visibility and intuitive programming. It includes functions such as auto changeover, adjustable differential control, compressor delay, and a filter change reminder.
Configuració i instal·lació
Informació de seguretat
- Turn off power to the heating and cooling system at the main fuse or circuit breaker panel before installation.
- Assegureu-vos que tot el cablejat compleixi amb els codis i les ordenances elèctriques locals.
- This thermostat operates on 24 Volts AC. Do not use on systems exceeding this voltage.
Eines necessàries
- Tornavís (Phillips i cap pla)
- Drill with appropriate bit (if new mounting holes are needed)
- Pelacables
Muntatge del termòstat
The RS9110T uses a universal sub-base for quick installation. Follow these steps:
- Separate the thermostat from its sub-base.
- Position the sub-base on the wall where the thermostat will be mounted.
- Marqueu els forats de muntatge.
- Si cal, perforeu forats pilot i inseriu ancoratges de paret.
- Fixeu la subbase a la paret amb els cargols proporcionats.
Figura 2: posterior View of Thermostat and Mounting Plate
Instruccions de cablejat
Refer to the wiring diagram and labels provided with your thermostat. Connect the wires from your HVAC system to the corresponding terminals on the thermostat's sub-base. Ensure connections are secure.
Figure 3: Thermostat Wiring Terminals
Typical wiring connections:
- R/RH: 24V AC Heating Power
- RC: 24V AC Cooling Power (Jumpered to RH for single transformer systems)
- C: Common wire (for continuous power to thermostat)
- W: Crida de calor
- Y: Trucada genial
- G: Crida dels fans
- B/O: Reversing Valve (Heat Pump applications)
After wiring, carefully attach the thermostat front panel to the sub-base.
Instruccions de funcionament
Visualització finalitzadaview
The touchscreen display shows the current time, day, set temperature, actual room temperature, system mode, and fan mode. Use the touch-sensitive areas to adjust settings.
Figure 4: Robertshaw RS9110T Thermostat (Screen Off)
Configuració del mode del sistema
Touch the 'SYSTEM' button on the display to cycle through available modes: Calor, Genial, Apagat, i Automàtic (si està activat).
Setting Fan Mode
Touch the 'FAN' button to select between Automàtic (el ventilador només funciona quan la calefacció/refrigeració està activa) o On (el ventilador funciona contínuament).
Ajust de la temperatura
Use the 'Up' and 'Down' arrow buttons on the touchscreen to increase or decrease the desired set temperature.
Programming Schedules (5-1-1 Day)
The RS9110T supports 5-1-1 day programming, allowing different schedules for weekdays, Saturday, and Sunday. Access the programming menu via the 'Menu' button on the display. You can set four periods per day: Desperta, marxar, Tornar, i Dormir, each with its own temperature setting.
- Despertar: Morning schedule when you wake up.
- Sortir: Daytime schedule when you are away.
- Tornada: Evening schedule when you return home.
- Dormir: Nighttime schedule.
Advanced Control Features
- Canvi automàtic: Canvia automàticament entre els modes de calefacció i refrigeració per mantenir la temperatura configurada.
- Adjustable Differential (Swing): Controls the temperature difference between when the system turns on and off.
- Retard del compressor: Prevents short-cycling of the compressor, extending equipment life.
- Adjustable Setpoint Limits: Allows setting minimum and maximum temperature limits.
- Calibració de temperatura: Adjusts the displayed temperature to match an external reference.
Manteniment
Recordatori de canvi de filtre
The thermostat includes an on/off filter change reminder. When activated, the display will indicate when it's time to replace your HVAC system's air filter. Refer to your HVAC system's manual for filter replacement instructions.
Canvi de bateria
The thermostat requires 2 AAA 1.5V alkaline batteries (included). When the battery indicator appears on the display, replace the batteries promptly to ensure continuous operation and prevent loss of settings. To replace, carefully remove the thermostat from its sub-base and access the battery compartment on the back.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| La pantalla està en blanc o tènue | Low or dead batteries; No 24V AC power | Replace AAA batteries; Check circuit breaker for HVAC system. |
| El sistema de calefacció/refrigeració no respon | Incorrect wiring; System mode set to 'Off'; Blown fuse in HVAC system | Verify wiring connections; Set system mode to 'Heat' or 'Cool'; Consult HVAC technician. |
| Les lectures de temperatura semblen inexactes | Thermostat location; Calibration needed | Ensure thermostat is not in direct sunlight or near heat sources; Perform temperature calibration. |
| Thermostat cycles too frequently or infrequently | Differential (swing) setting is too narrow or wide | Adjust the differential setting in the advanced menu. |
Especificacions
- Número de model: RS9110T
- Marca: Robertshaw
- Tipus de controlador: Pantalla tàctil
- Característica especial: Programmable (5-1-1 Day)
- Color: Blanc
- Usos específics: HVAC Control (Heating and Cooling Systems)
- Tipus de control de temperatura: Calefacció, refrigeració
- Tecnologia de connectivitat: Wi-Fi (Note: Product specifications indicate Wi-Fi, but features list does not detail Wi-Fi control. Please refer to product packaging for confirmation.)
- Font d'alimentació: DC power supply (24V AC from HVAC system)
- Voltage: 24 Volts
- Tipus de visualització: Touchscreen, Blue Backlight
- Mètode de control: Toca
- Tipus de muntatge: Muntatge de paret
- Bateries: Necessites 2 piles AAA (incloses)
- Pes de l'article: 8.64 unces
- Tipus de material: Plàstic
- Components inclosos: Thermostat, 2 AAA 1.5V alkaline batteries
- UPC: 662013228248
Figure 5: Robertshaw Pro Series Thermostat Feature Comparison (RS9110T highlighted)
Informació de la garantia
The Robertshaw RS9110T Pro Series Programmable Touchscreen Thermostat is backed by a Garantia limitada d'6 any. This warranty covers defects in materials and workmanship under normal use and service. For specific terms and conditions, please refer to the warranty documentation included with your product or contact Robertshaw customer service.
Figure 6: Product Packaging Highlighting Features and Warranty
Atenció al client
For technical assistance, troubleshooting, or warranty inquiries, please contact Robertshaw Customer Service:
Telèfon: 800.304.6563
You can also visit the official Robertshaw weblloc per obtenir recursos i suport addicionals.
