PRIOS Yahir LED Solar Outdoor Wall Light with Motion Detector - Instruction Manual

1. Introducció

Thank you for choosing the PRIOS Yahir LED Solar Outdoor Wall Light with Motion Detector. This manual provides essential information for the safe installation, operation, and maintenance of your new solar light. Please read these instructions carefully before use and retain them for future reference. This product is designed to provide efficient, motion-activated outdoor lighting using solar energy.

2. Instruccions de seguretat

• Assegureu-vos que la superfície de muntatge sigui estable i que pugui suportar el pes de l'aparell.
• No intenteu desmuntar ni modificar el producte. Això pot anul·lar la garantia i plantejar riscos per a la seguretat.
• Mantingueu el panell solar net per garantir una eficiència de càrrega òptima.
• This product is rated IP44 for protection against splashing water. Do not submerge it in water or expose it to high-pressure water jets.
• Avoid looking directly into the LED light source when illuminated, as it may cause eye strain.
• Elimineu el producte i els seus components de manera responsable d'acord amb la normativa local al final de la seva vida útil.

3. Contingut del paquet

Please check that all components are present and in good condition.

Imatge 3.1: Explotat view showing the solar panel unit, light fixture with motion sensor, and various mounting brackets and screws.

• PRIOS Yahir LED Solar Light Fixture with Motion Detector
• Solar Panel Unit
• Suport(s) de muntatge
• Screws and Wall Plugs for Installation
• Manual d'instruccions (aquest document)

4. Producte acabatview

The PRIOS Yahir solar light integrates a high-efficiency solar panel, a bright LED light source, and a sensitive motion detector into a single, modern unit.

Imatge 4.1: En angle view of the PRIOS Yahir solar light, showing the adjustable solar panel and the light unit with the motion sensor at the bottom.

Imatge 4.2: Close-up of the light unit's underside, highlighting the motion sensor and three adjustment dials for TIME, LUX, and SENS.

• Panell solar: Collects sunlight to charge the internal battery. Adjustable for optimal sun exposure.
• Llum LED: Proporciona una il·luminació brillant i eficient energèticament.
• Motion Detector (PIR Sensor): Detects movement to automatically activate the light.
• Dials d'ajust: (Refer to Image 4.2)
  • HORA: Adjusts the duration the light stays on after motion is detected.
  • LUX: Sets the ambient light level at which the motion sensor becomes active (e.g., only at dusk/night).
  • SENS: Adjusts the sensitivity of the motion detector.
• Interruptor d'alimentació: Located on the back of the unit for initial activation.

5. Configuració i instal·lació

Follow these steps for proper installation of your solar wall light.

1. Trieu una ubicació: Select a location on an outdoor wall that receives direct sunlight for at least 6-8 hours daily. Ensure the motion sensor has a clear line of sight to the area you wish to monitor.
2. Marca els punts de perforació: Feu servir el suport de muntatge com a plantilla per marcar els punts de perforació a la paret.
3. Forats: Perforeu els forats als punts marcats i introduïu els tacs de paret.
4. Muntar el suport: Fixeu el suport de muntatge a la paret amb els cargols proporcionats.
5. Attach the Light Unit: Attach the solar light unit to the mounted bracket. Ensure it is securely fastened.
   

   Imatge 5.1: The PRIOS Yahir solar light securely mounted on an exterior wall, demonstrating its operational state.
6. Ajustar el panell solar: Angle the solar panel to face the sun for maximum exposure throughout the day.
7. Activa la llum: Locate the power switch on the back of the light unit (refer to Image 5.2) and switch it to the "ON" position.
   

   Imatge 5.2: A hand operating the clear power switch located on the rear of the solar light unit.

8. Càrrec inicial: Allow the light to charge for at least 24-48 hours in direct sunlight before its first use to ensure the internal battery is fully charged.

6. Instruccions de funcionament

Once installed and activated, the PRIOS Yahir solar light operates automatically.

• Càrrega automàtica: During the day, the solar panel converts sunlight into electricity and stores it in the internal rechargeable battery.
• Activació automàtica: At dusk, when the ambient light level falls below the set LUX threshold, the motion sensor becomes active.
• Detecció de moviment: When motion is detected within the sensor's range, the LED light will turn on for the duration set by the TIME dial.
• Ajust de la configuració: Use the TIME, LUX, and SENS dials (refer to Image 4.2) to customize the light's behavior according to your preferences.
  • Gira TEMPS clockwise for longer illumination duration, counter-clockwise for shorter.
  • Gira LUX clockwise for the sensor to activate in brighter conditions, counter-clockwise for darker conditions (e.g., only deep night).
  • Gira SENS clockwise for higher motion detection sensitivity and range, counter-clockwise for lower.

7. Manteniment

Regular maintenance ensures optimal performance and extends the lifespan of your solar light.

• Neteja del panell solar: Netegeu periòdicament el panell solar amb un drap suau iamp drap per eliminar la pols, la brutícia o les restes. Un panell net garanteix una càrrega eficient.
• Cleaning the Light Fixture: Clean the light housing and motion sensor lens with a soft, damp tela. Eviteu els netejadors abrasius.
• Bateria: The internal rechargeable battery is designed for long-term use. It is not user-replaceable. If the light's performance significantly degrades over time, the battery may be reaching the end of its lifespan.
• Ajust estacional: In winter months or periods of reduced sunlight, the light's performance may be reduced due to less solar charging. Ensure the solar panel remains free of snow or ice.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

For warranty information or technical support, please refer to the purchase documentation or contact your retailer. Keep your proof of purchase for any warranty claims.