UPBRIGHT Donner DDA-20 Keyboard AmpPoder més viu

UpBright 18V AC/DC Adapter User Manual

Compatible with Donner DDA-20 Mini Electric Drum Ampmés viu

1. Introducció

This manual provides essential instructions for the safe and effective use of your UpBright 18V AC/DC Adapter. This power supply is designed to provide stable and reliable power to compatible devices, specifically the Donner DDA-20 Mini Electric Drum Amplifier and similar electronic instruments requiring an 18V DC input.

2. Instruccions de seguretat

  • Llegeix totes les instruccions: Before using the adapter, read and understand all safety and operating instructions.
  • Ús només en interiors: Aquest adaptador està dissenyat per a ús en interiors. No l'exposeu a la pluja, la humitat ni a temperatures extremes.
  • Vol adequattage: Assegureu-vos que l'entrada voltage del vostre dispositiu coincideix amb el volum de sortidatage of the adapter (18V DC).
  • Eviteu la sobrecàrrega: Do not connect the adapter to devices that exceed its maximum current output (3A).
  • Manipular amb cura: Do not drop, disassemble, or attempt to repair the adapter. Refer servicing to qualified personnel.
  • Mantenir allunyat dels nens: Guardeu l'adaptador fora de l'abast dels nens.
  • Desconnecteu quan no estigui en ús: Desconnecteu l'adaptador de la presa de corrent quan no l'utilitzeu durant períodes prolongats.

3. Producte acabatview

The UpBright 18V AC/DC Adapter is a reliable power solution featuring a wide input voltage range (100-240VAC) and a stable 18V DC output at 3 Amps. It is equipped with Over Voltage Protection (OVP), Over Current Protection (OCP), and Short Circuit Protection (SCP) to ensure the safety of your devices.

UpBright 18V AC/DC Adapter shown with a Donner DDA-20 Mini Electric Drum Amplifier, indicating compatibility.

Figure 3.1: UpBright AC/DC Adapter compatible with Donner DDA-20 Ampmés viu.

UpBright 18V AC/DC Adapter unit with attached power cable and barrel connector.

Figure 3.2: The UpBright 18V AC/DC Adapter unit.

4. Configuració

Follow these steps to properly set up your UpBright 18V AC/DC Adapter:

  1. Verifica la compatibilitat: Confirm that your device, such as the Donner DDA-20 amplifier, requires an 18V DC input and a barrel connector.
  2. Connecta't al dispositiu: Insert the barrel connector end of the adapter cable firmly into the DC input jack of your electronic device.
  3. Primer pla view of the barrel connector of the UpBright 18V AC/DC Adapter.

    Figure 4.1: Close-up of the barrel connector.

  4. Connect to power outlet: Plug the AC power cord into a standard wall outlet (100-240VAC). Ensure the connection is secure.
  5. UpBright 18V AC/DC Adapter with various international power cords (US, EU, UK, AU) to fit different regions.

    Figure 4.2: The adapter comes with a suitable AC power cord for your region.

  6. Power on device: Once connected, you can power on your electronic device.

5. Funcionament

The UpBright 18V AC/DC Adapter operates automatically once connected to a power source and a compatible device. It provides a constant 18V DC output. No user intervention is required during operation.

  • Assegureu-vos que l'adaptador estigui en una zona ben ventilada per evitar el sobreescalfament.
  • Avoid covering the adapter during use.
  • If you notice any unusual heat, smell, or noise, immediately unplug the adapter from the wall outlet and disconnect it from your device.

6. Manteniment

Un manteniment adequat garanteix la longevitat i el funcionament segur del vostre adaptador:

  • Neteja: Desconnecteu l'adaptador de totes les fonts d'alimentació abans de netejar-lo. Feu servir un drap suau i sec per netejar l'exterior. No utilitzeu netejadors líquids ni aerosols.
  • Emmagatzematge: When not in use, store the adapter in a cool, dry place, away from direct sunlight and moisture. Avoid tightly winding the cable to prevent damage.
  • Inspecció del cable: Regularly inspect the power cord and connector for any signs of damage, such as fraying, cuts, or bent pins. Do not use if damaged.

7. Solució De Problemes

If you encounter issues with your UpBright 18V AC/DC Adapter, refer to the following:

ProblemaCausa possibleSolució
No hi ha alimentació del dispositiuL'adaptador no està connectat correctamentAssegureu-vos que els dos extrems de l'adaptador estiguin connectats correctament.
No hi ha alimentació del dispositiuWall outlet is not activeProveu la presa de corrent amb un altre dispositiu o comproveu l'interruptor.
No hi ha alimentació del dispositiuDevice requires different voltage/ampedatVerify your device's power requirements match the adapter's specifications (18V DC, 3A).
L'adaptador s'escalfa excessivamentSobrecàrrega o mala ventilacióDisconnect immediately. Ensure the device's power draw is within 3A. Place adapter in a well-ventilated area.

8. Especificacions

  • Entrada Voltage: 100-240VAC, 50/60Hz
  • Vol. De sortidatage: 18V DC
  • Corrent de sortida: 3 A (3000 mA)
  • Tipus de connector: Connector de barril
  • Característiques de protecció: OVP (Over Voltagprotecció contra sobrecorrent), OCP (protecció contra sobrecorrent), SCP (protecció contra curtcircuits)
  • Dimensions del producte: Aproximadament 6 x 3 x 1 polzades
  • Pes de l'article: Aproximadament 10 unces

9. Garantia i Suport

Your UpBright 18V AC/DC Adapter comes with a commitment to quality and customer satisfaction.

  • Política de reemborsament: UpBright offers a 30-day refund period from the date of purchase.
  • Política d'intercanvi: The product is covered by a 24-month exchange policy for manufacturing defects.
  • Contacte amb l'assistència: For any questions, troubleshooting assistance, or warranty claims, please refer to the contact information provided with your purchase or visit the official UpBright weblloc.

© 2023 UPBRIGHT. All rights reserved.