Introducció
This manual provides detailed instructions for the installation, operation, and maintenance of your LEONLITE 3CCT LED Motion Sensor Security Flood Light, Model 19032. Please read this manual thoroughly before installation and retain it for future reference.
Informació de seguretat
- Seguretat elèctrica: Always turn off power at the circuit breaker before installing or servicing the fixture. Ensure all wiring connections are secure and comply with local electrical codes. If you are unsure about wiring, consult a qualified electrician.
- Posada a terra: Aquest aparell ha d'estar correctament connectat a terra per evitar possibles descàrregues elèctriques.
- Vol. Operatiutage: Aquest producte està dissenyat per a una font d'alimentació de 120 V CA.
- Classificació ambiental: The fixture is IP65 rated, indicating protection against dust and water jets. It is suitable for wet locations.
- Certificacions: This product is ETL and FCC certified, ensuring compliance with safety and performance standards.
Contingut del paquet
Verifiqueu que tots els components siguin presents abans de començar la instal·lació:
- LEONLITE 3CCT LED Motion Sensor Security Flood Light (1 unit)
- Mounting Plate (1 unit)
- Mounting Screws and Anchors (set)
- Wire Nuts (set)
- Gasket (1 unit)
- Manual d'instruccions (aquest document)
Figura 1: Technical drawing showing the product dimensions and a display of included mounting accessories such as the mounting plate, screws, and wire nuts.
Característiques del producte
- Selectable Color Temperature (3CCT): Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) to suit your preference.
- Alt Brillantor: Delivers 3000 lumens of illumination.
- Sensor de moviment: 180° detection angle with a range of up to 59 feet (18 meters).
- Disseny ajustable: Dos lamp heads rotate 180°, and the motion sensor rotates 360° for optimal coverage.
- Construcció duradora: Features a sturdy aluminum body for efficient heat dissipation and resistance to weather conditions.
- Múltiples modes de funcionament: On-Time, Auto (motion detection), and Dusk-to-Dawn modes.
Figura 2: Davant view of the LEONLITE 3CCT LED Motion Sensor Security Flood Light, showcasing its two adjustable light heads and integrated motion sensor.
Figura 3: Illustration highlighting the adjustable features: 180° rotation for light heads, 360° rotation for the motion sensor, and durable aluminum housing with integrated LED chips.
Configuració i instal·lació
- Preparació per a la instal·lació: Turn off power at the circuit breaker. Ensure the mounting surface is stable and can support the fixture.
- Instal·lació de la placa de muntatge: Secure the mounting plate to the junction box using the provided screws. Ensure the plate is flush against the surface.
- Cablejat: Connect the fixture's wires to your household wiring. Connect the black wire (Live) to the black wire, the white wire (Neutral) to the white wire, and the green/ground wire to the ground wire. Use the included wire nuts to secure connections.
- Adjunt d'accessoris: Carefully align the fixture with the mounting plate and secure it with the central screw. Ensure the gasket is properly seated to maintain the IP65 rating.
- Ajustar els capçals de llum i el sensor: Loosen the adjustment screws on the light heads and motion sensor to position them as desired. Tighten the screws once adjusted.
Figura 4: Image illustrating the CCT toggle switch for selecting 3000K, 4000K, or 5000K color temperatures. This switch is located on the fixture body and should be set before final installation or with power off.
Instruccions de funcionament
The flood light offers three operational modes and adjustable settings for customization.
Selecció del mode
Use the switch on the bottom of the motion sensor to select one of the following modes:
- Mode puntual: The light functions as a standard lamp, controlled by a wall switch. Motion sensing is disabled.
- Auto Mode (Motion Detection): The light automatically turns on when motion is detected at night and turns off after a set delay. The Lux and Time knobs control its behavior.
- Dusk-to-Dawn Mode (D2D): The built-in photocell automatically turns the light on at dusk and off at dawn. Motion sensing is disabled in this mode.
Figura 5: Diagram showing the three operational modes: On-Time, Motion Detection, and Dusk-to-Dawn.
Adjustable Settings (Auto Mode Only)
Three knobs allow fine-tuning of the motion sensor's performance:
- Lux Knob: Adjusts the ambient light level at which the motion sensor becomes active. Rotate clockwise for higher sensitivity (activates in brighter conditions), counter-clockwise for lower sensitivity (activates only in darker conditions).
- Botó de temps: Sets the duration the light remains on after motion is detected. Rotate clockwise for a longer delay (up to 5 minutes), counter-clockwise for a shorter delay (minimum 5 seconds).
- Pom de rang: Controls the motion detection distance. Rotate clockwise for a wider detection range (up to 59 feet), counter-clockwise for a shorter range.
Figura 6: Close-up of the control panel with three adjustable knobs: Lux, Time, and Range, along with the mode selection switch.
Figura 7: An outdoor scene demonstrating the 180° detection angle and 59ft (18m) detection distance of the motion sensor.
Manteniment
Un manteniment regular garanteix un rendiment òptim i una llarga durada de la llum de seguretat.
- Neteja: Netegeu periòdicament l'aparell amb un drap suau iamp drap. No utilitzeu productes de neteja abrasius ni dissolvents, ja que poden danyar l'acabat o els components elèctrics.
- Inspecció: Annually inspect the fixture for any signs of damage, loose wiring, or wear. Ensure all seals and gaskets are intact to maintain water resistance.
- Longevitat del LED: The integrated LED chips have a long lifespan (50,000 hours) and do not require replacement.
Resolució de problemes
If your security light is not functioning correctly, refer to the following common issues and solutions:
| Problema | Causa possible | Solució |
|---|---|---|
| La llum no s’encén. | No power supply. Incorrect wiring. Lux setting too low (in Auto mode). | Check circuit breaker. Verify wiring connections. Adjust Lux knob clockwise. |
| La llum es manté encesa contínuament. | Fixture is in On-Time or D2D mode. Continuous motion detected. Time setting too long. | Switch to Auto mode. Ensure no constant motion in detection area. Adjust Time knob counter-clockwise. |
| La llum parpelleja o s'encén i s'apaga ràpidament. | Interference with motion sensor. Lux setting too sensitive. | Ensure no objects (e.g., tree branches) are moving in the sensor's field of view. Adjust Lux knob counter-clockwise to reduce sensitivity. |
| El sensor de moviment no detecta. | Range setting too low. Obstruction in detection path. Sensor positioned incorrectly. | Adjust Range knob clockwise. Clear obstructions. Reposition sensor for optimal coverage. |
Especificacions
| Especificació | Detall |
|---|---|
| Marca | LEONITA |
| Número de model | 19032 |
| Color | Blanc |
| Material | Alumini |
| Tipus de font de llum | LED |
| Wattage | 25 watts |
| Voltage | 120 volts (CA) |
| Brillantor | 3000 lúmens |
| Temperatura de color | 3000K/4000K/5000K seleccionable |
| Angle de detecció de moviment | 180° |
| Distància de detecció de moviment | Fins a 59 peus (18 metres) |
| Nivell de resistència a l'aigua | IP65 (impermeable) |
| Dimensions del producte | 8.07 cm de llargada x 7.48 cm d'amplada x 5.9 cm d'alçada |
| Pes de l'article | 2.4 lliures |
| Vida útil | 50,000 hores |
| Certificacions | ETL, FCC |
Garantia i Suport
This LEONLITE security light comes with a 3 any de garantia from the date of purchase. This warranty covers defects in materials and workmanship under normal use. For warranty claims or technical support, please contact LEONLITE customer service through the retailer where the product was purchased or visit the official LEONLITE weblloc per obtenir informació de contacte.