1. Producte acabatview
This U.S. Solid 1-inch G-threaded motorized ball valve, constructed from SS304 stainless steel, is designed for reliable fluid control in various applications. It operates on 9-24V AC/DC power, opening or closing in 3-5 seconds, and features an automatic power cut-off to prevent overheating. The valve is lead-free, suitable for potable water, and boasts an IP65 rated housing for dust and water jet protection. It includes a manual override function and a position indicator for convenience. This valve is ideal for domestic water systems, home automation, brewing, and Arduino projects.
Figura 1: Frontal view of the U.S. Solid 1-inch Motorized Ball Valve.
2. Informació de seguretat
- Desconnecteu sempre l'alimentació abans de la instal·lació, el manteniment o la resolució de problemes.
- Assegureu-vos que el vol operatiutage (9-24V AC/DC) matches your power supply.
- Do not exceed the maximum pressure rating of 1.0 MPa.
- Install the valve in an environment within the specified ambient temperature range (-10 °C to 40 °C).
- Assegureu-vos una correcta connexió a terra per evitar riscos elèctrics.
- Consult a qualified professional for installation if you are unsure.
3. Contingut del paquet
Verifiqueu que hi hagi tots els elements en desempaquetar:
- U.S. Solid Motorized Ball Valve (USS-MSV102F6C)
- Manual d'usuari (aquest document)
4. Especificacions tècniques
| Característica | Especificació |
|---|---|
| Número de model | USS-MSV102F6C |
| Valve Material | SS304 Stainless Steel |
| Seient de pilota | PTFE |
| Material del segell | EPDM |
| Hora d'obertura/tancament | 3-5 segons |
| Vol. Operatiutage | 9-24V AC / DC |
| Consum màxim d'energia | 2 W |
| Max Torque | 2 N·m |
| Pressió màxima | 1.0 MPa (1000 kPa) |
| Interval de temperatura mitjà | 0 °C a 90 °C |
| Interval de temperatura ambient | -10 °C a 40 °C |
| Classificació IP | IP65 |
| Cicle de vida | 80,000 to 100,000 cycles |
| Tipus de perforació | Port complet |
| Tipus de fil | BSPP (G) - British Standard Parallel Pipe |
| Dimensions del producte (L x A x A) | 8.99 x 10.21 x 11.1 cm |
| GTIN/UPC | 888107104278 |
Figure 2: Product label with key specifications.
Figure 3: Technical drawing with dimensions for various valve sizes.
5. Instal·lació
5.1. Mounting the Valve
- Ensure the pipeline is clean and free of debris before installation.
- Apliqueu el segellador de rosques adequat a les rosques de la vàlvula.
- Thread the valve into the pipeline, ensuring a tight, leak-free connection. Do not overtighten.
- Orient the valve so the actuator is easily accessible for wiring and manual override.
Figure 4: Close-up of the valve's threaded connection.
5.2. Connexió elèctrica
The valve operates on 9-24V AC/DC. This model features a 3-wire positive break configuration. Refer to the wiring diagram provided with your specific product or consult the manufacturer's website for detailed instructions if the included diagram is unclear.
- Fil vermell: Connect to positive (+) power supply.
- Fil negre: Connect to negative (-) power supply.
- Fil groc: Control wire for valve position.
Typically, applying voltage between Red and Black wires powers the actuator. The Yellow wire, when energized, controls the valve's open/close state. Ensure all connections are secure and insulated.
6. Funcionament
6.1. Funcionament automàtic
Once properly installed and wired, the valve will open or close automatically when power is applied to the control circuit. The valve will consume power only during the opening or closing cycle (3-5 seconds) and then automatically cut off power, preventing overheating.
- Per obrir: Apply power to the designated control wire (e.g., Yellow wire). The valve will rotate to the open position.
- Tancar: Reverse the polarity or switch the control signal as per your wiring configuration. The valve will rotate to the closed position.
The position indicator on top of the actuator provides a visual confirmation of the valve's current open or closed state.
6.2. Manual Override Function
This valve is equipped with a manual override function, allowing you to operate it manually in case of power failure or if the valve becomes stuck.
- Locate the manual override knob on the actuator (refer to Figure 5).
- Turn the knob clockwise or counter-clockwise to manually open or close the valve.
- Ensure the valve is fully open or closed as required.
Figure 5: Manual override knob on the actuator.
7. Manteniment
The U.S. Solid motorized ball valve is designed for minimal maintenance. However, regular checks can ensure optimal performance and longevity.
- Inspecció periòdica: Regularly inspect the valve and connections for any signs of leaks, corrosion, or damage.
- Neteja: Keep the exterior of the actuator clean and free from excessive dust or moisture. The IP65 rating protects against dust and water jets, but extreme conditions should be avoided.
- Comprovació de la funcionalitat: Periodically test the automatic and manual operation of the valve to ensure it opens and closes smoothly.
- Eviteu productes químics durs: Do not use abrasive cleaners or harsh chemicals on the valve body or actuator, as this may damage the materials or seals.
8. Solució De Problemes
If you encounter issues with your motorized ball valve, refer to the table below for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| Valve does not open/close automatically. | No power, incorrect wiring, power supply outside 9-24V AC/DC range, motor fault. | Check power supply. Verify wiring connections against the diagram. Ensure voltage is within range. If issues persist, contact support. |
| Valve is stuck or operates slowly. | Debris in the valve, low power, mechanical obstruction. | Use the manual override to check for mechanical issues. Flush the system if debris is suspected. Verify power supply. |
| Leakage from connections. | Improperly tightened connections, damaged threads, insufficient thread sealant. | Disconnect power, drain system. Re-tighten connections with proper thread sealant. Inspect threads for damage. |
| Actuator makes noise but valve doesn't move. | Motor gear issue, valve seized. | Attempt manual override. If the valve moves manually, the motor may be faulty. If it doesn't move manually, the valve itself may be seized. Contact support. |
Note: A user review mentioned that the provided wiring schematic might be generic and not specific to the manual function model. If you encounter wiring difficulties, search for the specific wiring diagram for the USS-MSV102F6C model with 3-wire positive break and manual function.
9. Informació de la garantia
U.S. Solid products are manufactured to high-quality standards. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official U.S. Solid weblloc web. Conserveu el rebut de compra com a comprovant de compra per a qualsevol reclamació de garantia.
10. Atenció al client
For technical assistance, troubleshooting beyond this manual, or inquiries about your U.S. Solid motorized ball valve, please contact U.S. Solid customer support through their official website or the contact information provided with your purchase. When contacting support, please have your model number (USS-MSV102F6C) and purchase details ready.