THINKWARE X700 Dual Dash Cam Instruction Manual

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your THINKWARE X700 Dual Dash Cam. Please read this manual thoroughly before using the product to ensure proper functionality and to prevent damage.

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

• Front X700 Dash Cam
• Càmera posterior
• Targeta MicroSD de 32 GB
• Carregador de cotxe de 12V
• Cable de cablejat
• Muntatge del parabrisa
• Cable de la càmera posterior
• Guia d'inici ràpid

Producte acabatview

The THINKWARE X700 is a dual dash cam system designed to record both front and rear views of your vehicle in Full HD 1080p resolution. It features a 2.7-inch LCD touchscreen for easy control and playback, a G-Sensor for incident detection, and night vision capabilities for clear recordings in low light.

Figura 1: Davant view of the THINKWARE X700 Dash Cam, showing the main lens and "FHD RECORDER" label.

Figura 2: En angle view of the THINKWARE X700 Dash Cam, highlighting the power (PWR) and MicroSD card slots on the side.

Figura 3: posterior view of the THINKWARE X700 Dash Cam, displaying the LCD screen and the attached windshield mount.

Configuració

1. Inserció de la targeta MicroSD

1. Assegureu-vos que la càmera del salpicader estigui apagada.
2. Localitzeu la ranura per a targetes MicroSD al lateral de la unitat principal.
3. Insert the provided 32GB MicroSD card into the slot until it clicks into place.
4. Per treure-la, premeu suaument la targeta fins que surti.

2. Muntatge de la càmera frontal del salpicader

1. Netegeu la zona del parabrisa on es muntarà la càmera del salpicader.
2. Attach the windshield mount to the main dash cam unit.
3. Remove the protective film from the adhesive pad on the mount.
4. Press the mount firmly onto the windshield, ensuring the camera has a clear view of the road and does not obstruct the driver's vision.
5. Ajusteu l'angle de la càmera segons sigui necessari.

Figura 4: The THINKWARE X700 Dash Cam installed on the windshield, positioned to capture the road ahead.

3. Connexió de la càmera posterior

1. Munteu la càmera posterior al parabrisa posterior, assegurant una visió clara view.
2. Connect the rear camera cable to the rear camera and route the cable neatly to the front dash cam.
3. Plug the other end of the rear camera cable into the designated port on the main X700 unit.

4. Connexió d'alimentació

Choose one of the following power options:

• Carregador de cotxe de 12 V: Connect the 12V car charger to your vehicle's cigarette lighter socket and the other end to the dash cam's power input. The camera will power on and off with your vehicle's ignition.
• Hardwiring Cable (for Parking Mode): For continuous recording in Parking Mode, connect the hardwiring cable to your vehicle's fuse box according to the instructions provided with the hardwiring kit (sold separately or included in some packages). Professional installation is recommended for hardwiring.

Funcionament de la Dash Cam

1. Encès / apagat

• The dash cam automatically powers on when connected to power and the vehicle ignition is on.
• It powers off automatically when the ignition is turned off (unless hardwired for Parking Mode).
• To manually power off, disconnect the power cable.

2. Modes d'enregistrament

• Gravació contínua: Records continuously while driving. Older files are overwritten by newer ones when the MicroSD card is full.
• Enregistrament d'incidències: Automatically records and saves footage when an impact is detected by the G-Sensor. These files estan protegides per sobreescriure's.
• Enregistrament manual: Press the manual record button to save a segment of footagi manualment.
• Mode d'aparcament (opcional): If hardwired, the dash cam can record events while the vehicle is parked, including motion detection and impact detection.

Figura 5: The X700's LCD screen displaying recording status and menu options.

3. Using the LCD Touchscreen

The 2.7-inch LCD touchscreen allows you to:

• View viu footage from the front and rear cameras.
• Reprodueix vídeos gravats.
• Access and adjust camera settings (e.g., resolution, G-Sensor sensitivity, time zone).
• Formateu la targeta MicroSD.

4. Viewmenjar gravattage

• On the Dash Cam: Use the touchscreen to navigate to the playback menu and select desired videos.
• On a Computer: Remove the MicroSD card from the dash cam and insert it into a computer's card reader. Use the THINKWARE PC Viewer software (available for download from the THINKWARE website) for optimal viewing and analysis of footage, including GPS data (if applicable).

Manteniment

1. Gestió de targetes MicroSD

• Format: Regularly format the MicroSD card (at least once a month) using the dash cam's menu or the THINKWARE PC Viewer to ensure optimal performance and prevent recording errors.
• Substitució: MicroSD cards have a limited lifespan. Replace the card if you experience frequent recording errors or data corruption. Use high-endurance MicroSD cards designed for dash cam use.

2. Cleaning the Dash Cam

• Use a soft, dry cloth to clean the camera lens and the LCD screen.
• Do not use chemical cleaners or abrasive materials, as they may damage the surfaces.

3. Actualitzacions de firmware

Periodically check the official THINKWARE website for firmware updates. Updating the firmware can improve performance, add new features, and resolve potential issues. Follow the instructions provided on the website for firmware update procedures.

Resolució de problemes

Especificacions

Garantia i Suport

THINKWARE products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package or visit the official THINKWARE weblloc.

For technical support, frequently asked questions, and driver/firmware downloads, please visit the official THINKWARE support page:

www.thinkware.com/support