WORKPRO 3.6V Cordless Grass and Shrub Shear User Manual

Introducció

Thank you for choosing the WORKPRO 3.6V Cordless Grass and Shrub Shear. This versatile 2-in-1 tool is designed for efficient trimming of grass edges and small shrubs. It features a lightweight design, powerful motor, and a long-lasting battery for convenient outdoor use. Please read this manual carefully before operation to ensure safe and effective use of the product.

Image: The WORKPRO 3.6V Cordless Grass and Shrub Shear, showing the main unit, the grass shear blade, the shrub shear blade, and the Type-C charging cable.

Informació de seguretat

Sempre observeu les precaucions de seguretat bàsiques quan utilitzeu eines elèctriques per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.

• Llegeix el manual: Llegiu i enteneu totes les instruccions abans de fer servir l'eina.
• Mantenir la zona neta: Mantingueu els nens, els vianants i les mascotes allunyats de la zona d'operació.
• Utilitzeu equip de protecció: Always wear safety glasses, gloves, and appropriate footwear.
• Avoid Contact with Blades: No toqueu mai les fulles mentre l'eina estigui en funcionament o connectada a la xarxa elèctrica.
• Adherència segura: Subjecteu sempre l'eina fermament amb les dues mans durant el funcionament.
• Double Switch Safety: The tool features a double switch mechanism to prevent accidental activation. Ensure both switches are engaged for operation.
• Càrrega: Use only the provided Type-C charging cable and a compatible 5V/1A charger. Do not use the tool while charging.
• Emmagatzematge: Guardeu l'eina en un lloc sec i segur, fora de l'abast dels nens.

Image: Close-up of the ergonomic safety lock and ON/OFF switch, highlighting the dual activation mechanism for safe operation.

Contingut del paquet

Verifiqueu que tots els articles siguin presents i en bon estat en desempaquetar-los:

• 1 x WORKPRO Grass and Shrub Shear Unit
• 1 x Grass Blade (75 mm wide)
• 1 x Shrub Blade (120 mm length)
• 1 x cable de càrrega tipus C
• 1 x Manual d'usuari

Producte acabatview

Familiarize yourself with the components of your WORKPRO shear:

Image: Diagram showing key components: Type-C Charging Port with Indicator, Type-C Cable (1M), Safety Lock-off Button, ON/OFF Switch, Blade Release Button, TPR Anti-Slip Handle, and Shrub Blade. The unit weighs approximately 370g.

• Unitat principal: Ergonomic body with integrated motor and battery.
• Grass Blade: Designed for trimming grass edges, 75mm cutting width.
• Shrub Blade: Designed for shaping shrubs and small branches, 120mm cutting length.
• Port de càrrega tipus C: Per recarregar la bateria interna.
• Botó de bloqueig de seguretat: Evita l'arrencada accidental.
• Interruptor ON / OFF: Activates the motor when the safety lock is disengaged.
• Botó d'alliberament de la fulla: Allows for quick and easy blade changes.
• TPR Anti-Slip Handle: Proporciona una subjecció còmoda i segura.

Configuració

Carregant la bateria

The tool is equipped with a 2000mAh Lithium-ion battery. Before first use, fully charge the battery.

1. Locate the Type-C charging port on the tool.
2. Connect the provided Type-C charging cable to the tool and to a 5V/1A USB power source (e.g., power bank, Type-C charger, car charger, laptop/PC USB port). Note: USB charging brick is not included.
3. The charging indicator light will illuminate (typically red) during charging.
4. Once fully charged, the indicator light will change (typically green). Charging time is approximately 2-3 hours.
5. Desconnecteu el carregador un cop finalitzada la càrrega.

Image: Illustration of the WORKPRO shear being charged via a Type-C cable, showing compatible power sources like a power bank, Type-C charger, car charger, and laptop/PC. The charging indicator lights (red for charging, green for fully charged) are also depicted.

Instal·lació/canvi de fulles

Ensure the tool is turned off and disconnected from any power source before changing blades.

1. Press the Blade Release Button located on the top of the tool.
2. Carefully remove the currently installed blade by pulling it away from the unit.
3. Align the desired blade (grass or shrub) with the slot on the tool.
4. Empenyeu la fulla fermament al seu lloc fins que faci clic, cosa que indica que està ben bloquejada.
5. Verify the blade is securely attached by gently pulling on it.

Image: Diagram illustrating the dimensions of both the grass and shrub blades, and a close-up showing the easy and safe blade change mechanism with the blade release button.

Instruccions de funcionament

Always wear appropriate safety gear before operating the shear.

Inici i aturada de l'eina

1. Ensure the desired blade is securely installed.
2. Agafeu l'eina fermament.
3. To start, press and hold the Safety Lock-off Button with your thumb.
4. While holding the safety button, press the ON/OFF Switch with your index finger. The blades will begin to move.
5. To stop, release the ON/OFF Switch. The blades will stop.

Using the Grass Shear Blade

The grass shear blade is ideal for trimming grass edges around flowerbeds, pathways, and other areas inaccessible to larger mowers.

• Ensure the grass blade (75mm wide) is installed.
• Hold the tool with the blade parallel to the ground or at a slight angle for precise edging.
• Move the tool slowly and steadily along the grass edge.
• Avoid cutting wet grass, as it can clog the blades and reduce efficiency.

Image: Depicts the two cutting modes: Grass Shear with a maximum cutting width of 75mm, and Hedge Trimmer with a maximum cutting length of 118mm and maximum cutting thickness of 7.8mm.

Using the Shrub Shear Blade

The shrub shear blade is suitable for shaping and trimming small shrubs, hedges, and ornamental plants. It can cut branches up to 7.8mm in diameter.

• Ensure the shrub blade (120mm length) is installed.
• Hold the tool at a comfortable angle for trimming.
• Work in small sections, making smooth, even passes.
• Do not force the blades through thick branches. If resistance is met, reposition the tool or use a different cutting tool for larger branches.

Image: Collage showing the WORKPRO shear being used for various trimming tasks, including shaping small trees, weeding, and trimming potted plants, demonstrating its versatility.

Manteniment

Un manteniment regular garanteix un rendiment òptim i allarga la vida útil de la vostra eina.

Neteja

• Always turn off the tool and remove the blade before cleaning.
• Use a soft brush or cloth to remove debris, sap, and dirt from the blades and housing.
• Do not use abrasive cleaners or solvents, as they can damage the plastic parts.
• Wipe the blades with a lightly oiled cloth to prevent rust.

Cura de la fulla

• The blades are made of premium 65Mn steel for high hardness and wear resistance.
• Inspect blades regularly for damage or dullness.
• If blades become dull, they can be sharpened by a professional or replaced.
• Store blades in a dry place to prevent corrosion.

Imatge: Primer pla view of the premium 65Mn steel blades, emphasizing their high hardness, wear resistance, sharpness, and long life.

Emmagatzematge

• Guardeu l'eina en un lloc fresc i sec, allunyat de la llum solar directa i de la humitat.
• Ensure the battery is partially charged (around 50%) before long-term storage to maintain battery health.
• Mantenir fora de l'abast dels nens i d'usuaris no autoritzats.

Resolució de problemes

Especificacions

Image: Visual representation of the upgraded power motor (1100rpm) and the long-lasting 2000mAh Lithium-ion battery, indicating over 40 minutes of no-load operation time.

Garantia i Suport

Per obtenir informació sobre la garantia o assistència tècnica, poseu-vos en contacte amb el fabricant o amb el punt de venda. Conserveu el rebut de compra com a comprovant de compra.

Fabricant: Hang Zhou Great Star Industrial Co.,LTD

For further assistance, visit the WORKPRO official weblloc o poseu-vos en contacte amb el seu servei d'atenció al client.