Introducció
Thank you for choosing the CaDA C51043W Technics Buggy Building Blocks set. This manual provides detailed instructions for assembling, operating, and maintaining your remote control car. Please read this manual thoroughly before use to ensure proper function and safety.
Producte acabatview
The CaDA C51043W is a 522-piece building block set designed to construct an all-terrain remote control buggy. It features a 2.4 GHz 4-channel remote control system, a suspension system, and a high-horsepower motor for dynamic performance. The assembled model is compatible with Lego Technic components.
Figure 1: Assembled CaDA C51043W Technics Buggy with its remote control.
Contingut del paquet
Verifiqueu que tots els components que s'enumeren a continuació siguin presents al vostre paquet:
- 1 x Spare parts pack (522 building blocks)
- 1 x comandament a distància
- 1 x Manual d'usuari (aquest document)
- 1 x Battery pack (JV1010/7.4V Lithium battery)
- 1 x cable de càrrega USB
- 1 x Servo motor
- 1 x L motor
Figura 2: Mésview of the main components included in the package, such as the remote control, motors, battery box, and USB cable.
Especificacions
| Característica | Detall |
|---|---|
| Número de model | C51043W |
| Nombre de peces | 522 |
| Material | Plastic + Hard parts |
| Freqüència de control remot | 2.4 GHz |
| Distància de control remot | Aproximadament 25 metres |
| Velocitat màxima | 4.1 km/h |
| Temps d'ús | 30 minuts |
| Temps de càrrega | 4-6 hours (First charge: 8 hours) |
| Bateria de cotxe | JV1010/7.4V Lithium battery |
| Bateria de control remot | 2 x AAA JV8011/1.5V batteries (not included) |
| Pes del producte | 1280 grams |
| Dimensions muntades (L x A x A) | Aprox. 34.7 x 20.8 x 13.5 cm (13.75 x 8.2 x 5.3 polzades) |
Figure 3: Key dimensions of the assembled buggy.
Configuració
1. Muntatge
Follow the included intuitive instruction manual for step-by-step assembly. The pieces are packed in numbered bags to simplify the building process. Ensure all connections are secure.
Figura 4: Part frontal view of the fully assembled buggy.
2. Instal·lació i càrrega de la bateria
- Bateria del cotxe: Install the JV1010/7.4V Lithium battery pack into the designated compartment in the buggy. Connect it securely.
- Càrrega: Use the provided USB charging cable to charge the car's battery. The first charge should be approximately 8 hours. Subsequent charges will take 4-6 hours. Do not overcharge.
- Bateria de control remot: Insert 2 x AAA JV8011/1.5V batteries (not included) into the remote control. Ensure correct polarity.
Instruccions de funcionament
1. Encendre/apagar
- Turn on the power switch on the buggy.
- Engegueu l'interruptor d'alimentació del comandament a distància.
- The remote control and buggy should automatically pair. If not, refer to the troubleshooting section.
2. Controls bàsics
The 4-channel remote control allows for precise movement:
- Endavant/Enrere: Use the left joystick to move the buggy forward or backward.
- Left/Right Turn: Use the right joystick to steer the buggy left or right.
- Llums: The remote control may have a button to control the buggy's lights.
Figure 5: The buggy with its headlights on, ready for operation.
3. Consells de conducció
- Operate on flat, clear surfaces for optimal performance.
- Avoid water, sand, or excessively dusty environments to prevent damage to electronic components.
- Practice gentle steering and acceleration to master control.
Manteniment
1. Neteja
Wipe the buggy with a soft, dry cloth after each use to remove dust and debris. Do not use water or chemical cleaners.
2. Emmagatzematge
Store the buggy and remote control in a cool, dry place away from direct sunlight. Remove batteries from the remote control if storing for extended periods.
3. Cura de la bateria
- Always fully charge the car battery before use.
- No deixeu les bateries carregant-se sense vigilància.
- If the battery is damaged or leaking, discontinue use immediately and dispose of it properly.
Resolució de problemes
| Problema | Causa possible | Solució |
|---|---|---|
| Buggy does not respond to remote control. | Low battery in buggy or remote control; Not paired; Out of range. | Charge buggy battery; Replace remote control batteries; Ensure buggy and remote are powered on and within 25m range. |
| Buggy moves slowly or inconsistently. | Low buggy battery; Obstruction in wheels/gears. | Charge buggy battery; Check for and remove any obstructions. |
| Els llums no funcionen. | Loose connection; Damaged LED. | Check wiring connections for the lights; Contact support if damaged. |
Garantia i Suport
Each piece of this product undergoes quality inspection before shipment. If any part is missing or defective upon arrival, please circle the missing part in the instruction manual and send a picture to our customer support for a free replacement. Please retain your proof of purchase for warranty claims.
For further assistance or inquiries, please refer to the contact information provided on the product packaging or the official CaDA weblloc.