LDARC T20 Flight Controller Tower Stack F411 with 4in1 30A ESC

LDARC T20 Flight Controller Tower Stack F411 with 4in1 30A ESC User Manual

Model: T20 Flight Controller Tower Stack F411

Introducció

This manual provides essential information for the proper installation, configuration, and operation of your LDARC T20 Flight Controller Tower Stack. This integrated unit combines an F411 Flight Controller with a 4-in-1 30A Electronic Speed Controller (ESC), designed for 2-4S LiPo battery systems. Please read this manual thoroughly before use to ensure optimal performance and safety.

Producte acabatview

The LDARC T20 Tower Stack is a compact and efficient solution for small to medium-sized FPV drones. It integrates a powerful F411 Flight Controller with an advanced 4-in-1 30A ESC, simplifying wiring and reducing overall weight. The system supports Betaflight firmware for comprehensive configuration and tuning.

LDARC T20 Flight Controller Tower Stack components including F411 Flight Controller, 4-in-1 30A ESC, and connection cables.

Figura 1: LDARC T20 Flight Controller Tower Stack components. This image displays the individual F411 Flight Controller board, the 4-in-1 30A ESC board, a capacitor, various connection cables, and mounting hardware (screws and standoffs).

Assembled LDARC T20 Flight Controller Tower Stack with pink mounting hardware.

Figura 2: Assembled LDARC T20 Flight Controller Tower Stack. This image shows the flight controller and ESC boards stacked together, secured by pink mounting standoffs and screws, illustrating the compact form factor.

LDARC T20 Flight Controller and ESC connected by a multi-wire ribbon cable.

Figura 3: LDARC T20 Flight Controller and ESC connection. This image highlights the connection between the F411 Flight Controller and the 4-in-1 30A ESC via a multi-wire ribbon cable, demonstrating how the two main components interface.

Especificacions

T20 Flytower (Flight Controller)

  • Entrada Voltage: 2-4S LiPo
  • Firmware: LDARC_F411
  • Configurador: Betaflight
  • OSD: Betaflight OSD
  • Càmera Voltage: 5V
  • Pes: 3.4 g
  • Muntatge: 20x20mm
  • Flytower Size: 32x36x20 mm

TE30A ESC (Electronic Speed Controller)

  • Entrada Voltage: 2-4S LiPo
  • Corrent continu: 30A
  • Corrent de ràfega: 35 A (5 segons)
  • Ràtio de corrent: 160
  • Firmware: BLHeli_S DSHOT 600
  • Pes: 6.8 g
  • Muntatge: 20x20mm

Contingut del paquet

Verifiqueu que tots els elements siguin presents al paquet:

  • 1x LDARC TF411 Flight Controller
  • 1x LDARC TE30A ESC
  • 1x Set of Connection Cables
  • 1x Condensador
  • 1x Set of Mounting Hardware (screws, standoffs)

Configuració

The LDARC T20 Tower Stack requires careful installation and configuration. It is recommended to consult detailed wiring diagrams and Betaflight setup guides available online for your specific drone frame and peripheral components (receiver, VTX, camera, GPS, etc.).

  1. Muntatge: Securely mount the flight controller stack to your drone frame using the provided 20x20mm mounting hardware. Ensure proper isolation from vibrations.
  2. Cablejat: Connect the flight controller to the ESC using the supplied ribbon cable. Connect motors to the ESC pads (M1-M4). Connect your receiver, VTX, camera, and other peripherals to the appropriate pads on the flight controller. Pay close attention to polarity (+/-) and signal connections.
  3. Connexió d'alimentació: Solder the main battery lead to the ESC's battery pads. Ensure the capacitor is soldered to the main battery pads for voltage spike suppression.
  4. Firmware Flashing (Optional): If necessary, flash the latest Betaflight firmware (LDARC_F411 target) using the Betaflight Configurator.
  5. Configuració: Connect the flight controller to your computer via USB. Use the Betaflight Configurator to set up your receiver, modes, OSD, motor protocols (DSHOT600 recommended), and other flight parameters.
  6. Configuració de l'ESC: Use the BLHeli_S configurator (often accessible through Betaflight passthrough) to configure ESC settings if needed.

Always double-check all connections before applying power to prevent damage.

En funcionament

Once the setup and configuration are complete, you can proceed with operating your drone.

  • Comprovació prèvia al vol: Before each flight, ensure all components are securely attached, propellers are correctly installed, and battery is fully charged.
  • Armat: Arm the drone using the configured switch on your radio transmitter. Ensure you are in a safe, open area away from people and obstacles.
  • Vol: Operate the drone according to your skill level. The Betaflight OSD will provide real-time flight data.
  • Desarmament: Disarm the drone after landing to prevent accidental motor spin-up.

Manteniment

Regular maintenance helps ensure the longevity and reliability of your flight controller stack.

  • Inspecció visual: Periodically inspect the boards for any signs of physical damage, loose connections, or burnt components.
  • Neteja: Netegeu suaument les plaques amb alcohol isopropílic i un raspall suau si s'acumula pols o brutícia. Assegureu-vos que no quedi humitat abans d'engegar-les.
  • Actualitzacions de firmware: Keep the Betaflight and BLHeli_S firmware updated to benefit from performance improvements and bug fixes.
  • Comprovacions de connexió: Verify that all soldered joints are strong and all connectors are seated properly.

Resolució de problemes

This section provides general guidance for common issues. For specific problems, refer to online communities and resources for Betaflight and BLHeli_S.

  • Sense energia: Check battery connection, main power lead soldering, and ensure no short circuits.
  • Motors que no giren: Verify motor connections, ESC calibration, DSHOT protocol settings in Betaflight, and ensure the drone is armed. Check for bent motor shafts or damaged propellers.
  • No Receiver Input: Check receiver wiring (signal, ground, power), ensure receiver is bound to the transmitter, and verify receiver protocol settings in Betaflight.
  • Vol inestable: Review PID tuning, check for vibrations, ensure propellers are balanced and undamaged, and verify correct motor direction.
  • L'OSD no es mostra: Check OSD settings in Betaflight, ensure camera and VTX are correctly connected and powered.

Informació de seguretat

Always prioritize safety when working with electronic components and flying drones.

  • Seguretat de la bateria: Use appropriate LiPo batteries. Never overcharge or over-discharge. Store in a fire-safe location.
  • Seguretat de l'hèlix: Always remove propellers when performing maintenance or configuration to prevent accidental injury.
  • Soldadura: Use proper soldering techniques and safety equipment (e.g., ventilation, eye protection).
  • Entorn de vol: Fly in open areas, away from people, animals, and property. Adhere to local regulations and laws regarding drone operation.
  • Aigua i humitat: Keep the flight controller and ESC away from water and moisture to prevent short circuits and damage.

Garantia i Suport

Specific warranty details for the LDARC T20 Flight Controller Tower Stack are typically provided at the point of purchase or on the manufacturer's official website. For technical support, firmware updates, or further assistance, please refer to the official LDARC resources or relevant online FPV communities.

Si us plau, conserveu el comprovant de compra per a qualsevol reclamació de garantia.

© 2023 LDARC. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.