JONATHAN I JYL7111A

JONATHAN Y JYL7111A Rechargeable Integrated LED Table Lamp Manual d'usuari

Model: JYL7111A

Introducció

Gràcies per la compraasing the JONATHAN Y JYL7111A Rechargeable Integrated LED Table Lamp. This portable and cordless accent light is designed to provide soft, dimmable illumination for various indoor settings. This manual provides essential information for safe and efficient use of your lamp.

Informació de seguretat

  • Llegiu totes les instruccions abans d'utilitzar-les i conserveu-les per a futures consultes.
  • Aquest producte és només per a ús en interiors. No l'exposeu a la humitat ni a temperatures extremes.
  • No intenteu desmuntar ni modificar el lampAixò pot anul·lar la garantia i suposar un risc per a la seguretat.
  • Feu servir només el cable de càrrega proporcionat o un cable USB-C certificat per carregar.
  • Mantingueu la lamp lluny de fonts de calor i de la llum solar directa.
  • The integrated LED components are not replaceable.

Contingut del paquet

Verifiqueu que tots els components siguin presents al paquet:

  • JONATHAN Y JYL7111A Rechargeable Integrated LED Table Lamp
  • Cable de càrrega USB-C
  • Manual d'usuari (aquest document)

Configuració

Your JONATHAN Y JYL7111A lamp comes pre-assembled. No complex setup is required. Simply remove the lamp del seu embalatge.

JONATHAN Y JYL7111A Rechargeable Integrated LED Table Lamp on a wooden surface

Image: The JYL7111A lamp ready for use on a wooden surface.

Abans del primer ús, assegureu-vos que la lamp is fully charged. Refer to the "Charging" section for instructions.

Video: This video demonstrates the basic setup and assembly of the JYL7111B lamp, which shares similar setup principles with the JYL7111A model.

Instruccions de funcionament

Encès/Apagat

Per girar la lamp on or off, gently tap the touch sensor located on the base of the lamp.

Hand touching the sensor on the lamp base to turn it on

Image: A hand activating the touch sensor on the lampla base.

Funció d'apagada

To adjust the brightness, press and hold the touch sensor. The light will gradually dim or brighten. Release your finger when the desired brightness level is reached.

Four images showing the lamp at different brightness levels, from off to bright

Imatge: Representació visual de la lamp's dimmable feature, showing various light intensities.

Video: This video demonstrates the JYL7111A product features, including the touch sensor and dimming capabilities.

Carregant

El lamp is equipped with a rechargeable battery. To charge:

  1. Locate the USB-C charging port on the side of the lamp base.
  2. Insert the small end of the USB-C cable into the lampel port de càrrega.
  3. Connect the larger end of the USB-C cable to a compatible USB power adapter (not included) or a powered USB port.
  4. El llum indicador de càrrega s'il·luminarà (normalment vermell) durant la càrrega i canviarà de color (normalment verd) quan estigui completament carregat.
  5. A full charge provides approximately 11 hours of illumination at maximum brightness.
Hands plugging a USB-C cable into the charging port of the lamp

Image: A close-up of hands connecting the USB-C charging cable to the lamp.

Manteniment

Per garantir la longevitat i l'aspecte del vostre lamp:

  • Neteja: Desconnecteu la lamp from any power source before cleaning. Wipe the lamp with a soft, dry cloth. Do not use abrasive cleaners, solvents, or harsh chemicals, as these may damage the finish or glass.
  • Emmagatzematge: Quan no l'utilitzeu durant períodes prolongats, guardeu-loamp en un lloc fresc i sec.

Resolució de problemes

ProblemaCausa possibleSolució
Lamp no s'encén.La bateria està esgotada.Carregar la lamp completament amb el cable USB-C.
Lamp does not dim.Funcionament incorrecte del sensor tàctil.Premeu i aguantar the touch sensor to activate the dimming function.
Charging indicator light does not turn green.Lamp not fully charged or charging cable/adapter issue.Assegureu-vos que lamp is connected to a working USB power source. Try a different USB-C cable or power adapter. Allow sufficient time for charging.
La llum parpelleja o és inconsistent.Bateria baixa o problema intern.Carregar la lamp fully. If the issue persists after charging, contact customer support.

Especificacions

Diagram showing the dimensions of the JONATHAN Y JYL7111A lamp: 8 inches (20cm) height and 4.125 inches (10.5cm) width/depth.

Image: Dimensions of the JYL7111A lamp.

CaracterísticaDetall
Número de modelJYL7111A
Dimensions (P x A x A)4.13 "P x 4.13" W x 8" H
Pes de l'article1.32 lliures
Tipus de font de llumLED integrat
Wattage2 watts
Font d'alimentacióBateria recarregable (USB-C)
Mètode de controlSensor tàctil
Material d'ombraGlass (Frosted)
Material baseFerro
Ús interior/exteriorNomés interior
Característiques addicionalsCordless, Dimmable, Portable, Rechargeable

Informació de la garantia

JONATHAN Y provides a 30-day manufacturer warranty for defects only. This warranty covers manufacturing defects and does not cover normal wear and tear. Visible damages not noted upon delivery will be determined to be customer damage and will not be warranted. All products are inspected upon arrival, and worn, dirty, or stained merchandise will not be accepted for warranty claims.

For warranty information on this product, please contact the internet customer service center.

Suport

If you have any questions, require assistance, or encounter issues not covered in this manual, please contact JONATHAN Y customer support. Refer to the product packaging or the official JONATHAN Y weblloc web per obtenir informació de contacte actualitzada.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.