FLEXISPOT E6 Standing Desk User Manual

1. Introducció

Thank you for choosing the FLEXISPOT E6 Standing Desk. This electric height-adjustable desk is designed to enhance your workspace ergonomics, allowing seamless transitions between sitting and standing positions. This manual provides essential information for safe assembly, operation, and maintenance of your new desk.

Image 1.1: The FLEXISPOT E6 Standing Desk in a typical office setup.

2. Informació de seguretat

• Ensure the total weight on the desk does not exceed 220 lbs (100 kg).
• Adjust the desk height according to user comfort while maintaining stability.
• Mantingueu els nens i les mascotes allunyats de l'escriptori durant el funcionament.
• Do not place hands or objects near moving parts to avoid injury or damage.
• Ensure all cables are properly managed to prevent tripping hazards and damage.
• Només feu servir l'adaptador de corrent i els cables proporcionats.

3. Contingut del paquet

Si us plau, comproveu que tots els components siguin presents abans de començar el muntatge:

• Pedestal (x2)
• Right Beam (x2)
• Left Beam (x2)
• Column (x2)
• Side Bracket (x2)
• Suport adaptador (x1)
• Teclat (x1)
• AC Power Cable (x1)
• Adaptador de corrent (x1)
• Extension Cord (x1)
• T-Socket Wrench (x1)
• Clip de cable (x4)
• Escriptori (x1)

4. Instruccions de muntatge

Follow these steps to assemble your FLEXISPOT E6 Standing Desk. It is recommended to have two people for assembly.

1. Assemble the Cross Beams: Connect the left and right beams using the provided screws and T-socket wrench. Ensure screws are aligned with square holes and pressed tightly.
2. Attach Pedestals to Columns: Secure the pedestals to the columns using the designated screws. Prioritize diagonal screws during this step for stability.
3. Connect Columns to Cross Beams: Attach the assembled column-pedestal units to the cross beams.
4. Instal·leu els suports laterals: Mount the side brackets to the frame using the appropriate screws.
5. Mount the Desktop: Carefully place the desktop upside down on a soft, clean surface. Position the assembled frame onto the desktop. Ensure the distance between the supporting bracket and the edge of the tabletop does not exceed 200mm. Secure the frame to the desktop using the provided screws.
6. Install Keypad and Adapter Bracket: Attach the keypad to the underside of the desktop, ensuring it is on the same side as the adapter bracket. The curved edge of the keypad should be flush with the edge of the table top. Secure the adapter bracket.
7. Connectar els cables: Connect the motor cables from the columns to the control box. Connect the keypad cable to the control box. Plug the power adapter into the control box and then into a power outlet. Use cable clips to manage and secure all cables neatly.

Image 4.2: The assembled FLEXISPOT E6 Standing Desk ready for use.

5. Instruccions de funcionament

Your FLEXISPOT E6 Standing Desk features a quiet and smooth dual motor system for effortless height adjustment.

• Ajust de l'alçada: Use the up (▲) and down (▼) arrow buttons on the keypad to raise or lower the desk to your desired height. The current height will be displayed on the LED panel.
• 3-Stage Lift System: The desk offers a wide range of lifting space, from 23.6 inches to 48.8 inches, accommodating various user heights.
• Funcionament silenciós: The dual motors operate at less than 50 dB, ensuring minimal noise disruption.

Image 5.1: The intelligent keypad for height adjustment and memory settings.

6. Controlador programable

The intelligent keypad allows you to save and recall your preferred desk heights:

1. Establir una posició de memòria: Adjust the desk to your desired height using the up/down arrows. Press the 'M' button, then press one of the numbered memory buttons (1, 2, 3, or 4) within 3 seconds to save the current height.
2. Recordar una posició de memòria: Simply press the corresponding numbered memory button (1, 2, 3, or 4) to automatically move the desk to the saved height.
3. Sistema anticol·lisió: The desk is equipped with an anti-collision system to detect and prevent collisions during height adjustment, improving safety.

7. Especificacions

Image 7.1: Detailed dimensions and height ranges of the FLEXISPOT E6 desk.

Image 7.2: The desk demonstrating its 220 lbs maximum load capacity.

8. Manteniment

• Neteja: Netegeu l'escriptori i el marc amb un drap suauamp drap. Eviteu productes químics agressius o netejadors abrasius.
• Gestió de cables: Regularly check and reorganize cables to prevent tangles and damage.
• Inspecció: Periodically inspect all screws and connections to ensure they are tight and secure.

9. Solució De Problemes

If you encounter any issues with your FLEXISPOT E6 Standing Desk, please refer to the following common solutions:

• L'escriptori no es mou: Check all cable connections, especially the power adapter and motor cables. Ensure the power outlet is functional.
• Alçada desigual: Perform a reset by holding down the 'M' button for 5-10 seconds until the desk moves to its lowest position and then slightly rises.
• Codis d'error: Refer to the specific error code displayed on the keypad and consult the FLEXISPOT support webo poseu-vos en contacte amb el servei d'atenció al client per obtenir ajuda.

10. Garantia i Suport

FLEXISPOT stands behind the quality of its products:

• Garantia: Enjoy peace of mind with our 5-year coverage on the desk frame and motor, and 2-year protection on the control panel and electronics.
• Devolucions: Aquest producte es pot retornar fins al 31 de gener de 2026.
• Atenció al client: For any assistance, please contact FLEXISPOT customer support. Visit the official FLEXISPOT Store per a més informació i opcions de contacte.