1. Producte acabatview
The WALI FTM-2 Full Motion TV Wall Mount is designed to securely hold most flat and curved screen televisions ranging from 32 to 70 inches. This mount offers extensive adjustability, including tilt, swivel, and extension, allowing for optimal viewing angles from various positions in a room. Constructed from reinforced cold-rolled steel, it ensures durability and stability for your television.
2. Informació important de seguretat
ADVERTIMENT: Llegiu atentament totes les instruccions abans de la instal·lació. Si no enteneu aquestes instruccions o teniu dubtes sobre la seguretat de la instal·lació, consulteu un instal·lador qualificat. Una instal·lació incorrecta pot causar lesions o danys greus.
- Capacitat de pes: No supereu la capacitat màxima de pes de 40 kg. Aquest suport està pensat per utilitzar-se només amb els pesos màxims indicats. L'ús amb productes més pesants que els pesos màxims indicats pot provocar inestabilitat i causar possibles lesions.
- Tipus de paret: This mount is designed for installation on vertical wood studs, solid concrete walls, or brick walls. NO instal·leu només a panells de guix. Assegureu-vos que la superfície de muntatge pugui suportar amb seguretat el pes combinat de l'equip i de tot el maquinari connectat.
- Compatibilitat VESA: Ensure your TV's VESA mounting pattern is within the supported range (100x100mm to 400x400mm).
- Eines: Use appropriate tools for installation. Always wear safety gear, including eye protection.
- Nens: Mantingueu els nens allunyats de la zona d'instal·lació. Les peces petites poden ser un perill d'asfíxia.
Image: The mount is constructed from reinforced cold-rolled steel, tested to support up to 88 lbs, ensuring structural integrity and safety for your television.
3. Contingut del paquet
Verify that all components are present and undamaged before beginning installation. If any parts are missing or defective, contact WALI customer support.
- WALI FTM-2 TV Wall Mount (1 unit)
- Kit de ferreteria de muntatge (diversos cargols, volanderes, separadors, ancoratges)
- Manual d'usuari (aquest document)
Image: All necessary hardware for installation is included, such as various bolts, washers, spacers, and wall anchors. A spirit level is also provided to assist with accurate mounting.
4. Comprovació de compatibilitat
Before installation, confirm your television and wall meet the following requirements:
- Mida del televisor: Compatible with most 32 to 70 inch flat or curved screen TVs.
- Pes del televisor: Your TV must weigh no more than 88 lbs (40 kg).
- Patró VESA: The mounting holes on the back of your TV must match VESA patterns from 100x100mm to 400x400mm.
- Tipus de paret: Suitable for 12" or 16" wood studs, concrete walls, and brick walls. Not for drywall-only installation.
Image: This diagram outlines the four key compatibility checks: TV weight (up to 88 lbs), VESA pattern (100x100mm to 400x400mm), TV size (32-70 inches), and suitable wall types (wood studs, concrete, brick). Installation on drywall alone is not supported.
5. Instruccions d'instal·lació
Follow these steps carefully for a secure installation. It is recommended to have two people for installation.
Pas 1: Fixeu el suport a la paret
- Locate the desired mounting position on your wall. Use a stud finder to locate wood studs if applicable.
- Mark the drill holes for the wall plate. Ensure the marks are level using a spirit level.
- Drill pilot holes at the marked locations. For wood studs, use a 5/32 inch (4mm) drill bit. For concrete/brick walls, use a 3/8 inch (10mm) drill bit and insert wall anchors.
- Attach the wall plate to the wall using the appropriate lag bolts and washers. Tighten securely.
Step 2: Attach Plate to TV
- Lay your TV face down on a soft, clean surface to prevent scratches.
- Identifiqueu els forats de muntatge VESA a la part posterior del vostre televisor.
- Select the correct screws, washers, and spacers from the hardware kit that fit your TV's mounting holes.
- Attach the TV brackets to the back of your TV. Ensure they are securely fastened but do not overtighten.
Step 3: Hang TV on Bracket
- With assistance, carefully lift the TV and hook the TV brackets onto the wall plate.
- Assegureu-vos que el televisor estigui centrat i anivellat.
- Secure the TV to the wall plate using the safety screws or locking mechanisms provided.
6. Adjustments (Operating)
The WALI FTM-2 mount offers flexible adjustments to achieve your desired viewangle de ing.
- Inclinació: The TV can be tilted +3° upwards and -15° downwards. Loosen the tilt adjustment knobs on the TV brackets, adjust to the desired angle, and then re-tighten the knobs.
- Girar: The mount allows for a ±60° swivel (left and right) depending on TV size and wall distance. Gently push or pull the TV to the desired swivel angle.
- Nivell: After installation, if the TV is slightly unlevel, you can adjust it by ±3°. Loosen the leveling screws, adjust the TV, and re-tighten.
- Extensió/Retracció: The mount extends from 2.6 inches (6.6 cm) to 14 inches (35.6 cm) from the wall. Gently pull the TV forward or push it back to adjust the distance.
Image: This diagram shows the full range of motion: 15 degrees of tilt, 60 degrees of swivel, extension up to 14 inches from the wall, and 4 degrees of leveling adjustment for a perfect viewexperiència.
7. Manteniment
Un manteniment regular garanteix la longevitat i el funcionament segur del suport de paret per a televisors.
- Comprovacions periòdiques: Periodically check that all screws and connections are tight and secure. Re-tighten if necessary.
- Neteja: Netegeu el suport amb un drap suau i sec. Eviteu netejadors o dissolvents abrasius que puguin danyar l'acabat.
- Parts mòbils: The articulating arms are designed for smooth movement. No lubrication is typically required. If movement becomes stiff, check for obstructions or loose components.
8. Solució De Problemes
Si teniu problemes durant o després de la instal·lació, consulteu els problemes i solucions més comuns següents:
- El televisor no està anivellat: Use the leveling adjustment feature (refer to Section 6) to correct the angle. Ensure the wall plate was installed level initially.
- La muntura sembla inestable: Double-check all wall and TV attachment screws to ensure they are securely tightened. Verify that the wall type is appropriate and that the TV weight does not exceed the mount's capacity.
- El televisor no s'adapta al suport: Re-check your TV's VESA pattern against the mount's specifications (refer to Section 4). Ensure you are using the correct screws and spacers for your TV model.
- Difficulty moving the arms: Ensure no cables are snagged or obstructing movement. Check for any overtightened bolts that might restrict articulation.
If problems persist, contact WALI customer support for assistance.
9. Especificacions
| Número de model | FTM-2 |
| Compatibilitat de la mida del televisor | 32 - 70 polzades |
| Capacitat de pes | 88 lliures (40 kg) |
| Compatibilitat VESA | 100x100mm a 400x400mm |
| Angle d'inclinació | +3° / -15° |
| Angle de gir | ±60° |
| Ajust d'anivellament | ±3° |
| Extensió des de la paret | de 6.6 cm (2.6 polzades) a 35.6 cm (14 polzades) |
| Material | Reinforced Cold-Rolled Steel |
| Color | Negre |
10. Garantia i atenció al client
WALI products are designed for quality and reliability. For warranty information or technical assistance, please contact WALI customer support.
WALI is committed to providing dedicated product support and aims to respond to inquiries within 12 hours.
- Contacte: Refer to the WALI official weblloc web o l'embalatge del producte per obtenir la informació de contacte més actualitzada.
- Prova de compra: Conserveu el vostre comprovant de compra per a reclamacions de garantia.