1. Producte acabatview
The VGR V-699 Professional Digital Display Cordless Hair Clipper is designed for precise and efficient hair cutting. It features durable titanium-coated blades for a smooth trimming experience. This clipper operates on a powerful 2000mAh Li-ion battery, providing up to 180 minutes of cordless use after a full 3-hour charge. For continuous operation, it can also be used while connected to a power source. An integrated LED digital display clearly shows the remaining battery charge.
The clipper includes an adjustable taper lever, allowing for fine-tuning of cutting lengths from 0.8mm to 2mm without the need for guide combs. Additionally, four attachment guide combs are provided for various cutting lengths: 3mm, 6mm, 9mm, and 12mm.
Image: VGR V-699 Hair Clipper highlighting its key components such as titanium blades, taper lever, and LED display.
2. Instruccions de seguretat importants
To ensure safe operation and prevent injury or damage, please read and follow these instructions carefully:
- Llegiu sempre totes les instruccions abans d'utilitzar l'aparell.
- Keep the appliance dry. Do not use it near water, in a bathroom, or in any wet environment.
- No submergiu l'aparell en aigua o cap altre líquid.
- Mantenir l'aparell fora de l'abast dels nens.
- Do not use the appliance if the power cord or the appliance itself is damaged. Contact customer support for assistance.
- Feu servir només el cable de càrrega que s'inclou amb l'aparell.
- Unplug the appliance from the power source before cleaning or performing any maintenance.
- Avoid placing the appliance on soft surfaces during operation, as this may block ventilation openings.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al paquet:
- VGR V-699 Hair Clipper
- 4 pintes de guia (3 mm, 6 mm, 9 mm, 12 mm)
- Cable de càrrega USB
- Raspall de neteja
- Oli de fulla
- Manual d'usuari
Image: The VGR V-699 Hair Clipper kit, showing the clipper, various guide combs, USB charging cable, and the product box.
4. Getting Started: Charging Your Clipper
Before first use, fully charge the clipper. Ensure the clipper is turned off during charging.
- Connect the small end of the USB charging cable to the charging port at the bottom of the clipper.
- Connect the larger end of the USB cable to a compatible USB power source, such as a laptop, USB wall adapter, car charger, or power bank.
- The LED display on the clipper will illuminate, indicating the charging status.
- A full charge typically takes approximately 3 hours and provides up to 180 minutes of cordless operation.
- Once fully charged, disconnect the charging cable. Avoid overcharging to prolong battery life.
Image: Illustration of the clipper's USB charging capability, showing various compatible power sources and the 3-hour charge time for 180 minutes of work time.
5. Attaching and Removing Guide Combs
Guide combs help achieve desired hair lengths. Ensure the clipper is turned off before attaching or removing combs.
- Adjuntar: Select the desired guide comb. Align the comb with the clipper blade and push it firmly until it securely clicks into place.
- Per eliminar: Gently pull the guide comb away from the clipper blade.
Imatge: Detallada view of the four guide combs (3mm, 6mm, 9mm, 12mm) and how they attach to the clipper blade.
6. Operating Your Hair Clipper
6.1 Encès/Apagat
To turn the clipper on or off, simply press the ON/OFF switch located on the side of the appliance.
6.2 Ajust de la longitud de tall
- Palanca cónica: The integrated taper lever on the side of the clipper allows for precise adjustment of the blade length from 0.8mm to 2mm. This is useful for blending and achieving specific short lengths without a guide comb.
- Pintes de guia: For longer and consistent cutting lengths, attach one of the four provided guide combs (3mm, 6mm, 9mm, 12mm) as described in Section 5.
6.3 Ús amb cable i sense cable
The VGR V-699 clipper offers flexibility in use:
- Funcionament sense fil: After a full charge, the clipper can be used wirelessly for up to 180 minutes, providing freedom of movement.
- Operació amb cable: If the battery is low or for extended use, connect the clipper directly to a power source using the USB charging cable. The clipper will operate while charging.
Image: A user demonstrating the VGR V-699 Hair Clipper in use for hair trimming.
7. Manteniment i cura
Regular maintenance ensures optimal performance and extends the lifespan of your clipper.
7.1 Neteja de les fulles
- Després de cada ús, apagueu la talladora de cabells i desconnecteu-la de qualsevol font d'alimentació.
- Traieu qualsevol pinta guia que tingueu connectada.
- Use the provided cleaning brush to gently brush away loose hair from the blades and the clipper head.
- Do not rinse the blades or the clipper under water unless explicitly stated as waterproof (this model is not specified as fully waterproof).
7.2 Lubricació de les fulles
To maintain cutting efficiency and prevent blade wear, oil the blades regularly.
- After cleaning the blades, apply one or two small drops of the provided blade oil onto the teeth of the blades.
- Turn the clipper on for a few seconds to allow the oil to distribute evenly across the blades.
- Netegeu l'excés d'oli amb un drap suau.
7.3 Emmagatzematge
Guardeu la talladora de cabells en un lloc sec i fresc, allunyat de la llum solar directa i la humitat. Mantingueu-la fora de l'abast dels nens.
Imatge: Una imatge detallada view of the titanium-coated blades, emphasizing their design for superior cutting performance.
8. Solució De Problemes
If you encounter any issues with your VGR V-699 Hair Clipper, refer to the table below for common problems and solutions.
| Problema | Causa possible | Solució |
|---|---|---|
| La talladora no s'encén. | Battery is depleted. ON/OFF switch not fully engaged. | Recharge the clipper. Ensure the ON/OFF switch is pressed firmly. |
| Mal rendiment de tall o arrencada de cabells. | Blades are dirty or clogged with hair. Blades are not oiled. Blades may be dull or damaged. | Clean the blades thoroughly with the brush. Apply blade oil. If blades are dull, consider professional sharpening or replacement. |
| La talladora s'escalfa durant l'ús. | Extended continuous use. Blades are not properly lubricated. | Allow the clipper to cool down. Ensure blades are clean and regularly oiled. |
| La bateria no es carrega. | Loose USB cable connection. Faulty USB cable or power source. | Check that the USB cable is securely connected to both the clipper and the power source. Try a different USB cable or power adapter. |
9. Especificacions
- Número de model: V 699
- Font d'alimentació: Battery Powered (Li-ion)
- Capacitat de la bateria: 2000 mAh
- Temps de càrrega: 3 hores aproximadament
- Temps de funcionament: Up to 180 minutes (cordless)
- Voltage: 110-220V (dual-voltage)
- Velocitat del motor: 5500 rpm
- Material de la fulla: Titanium Coated Stainless Steel
- Minimum Cutting Length (without comb): 0.8 mm
- Maximum Cutting Length (without comb): 2 mm
- Longituds de les pintes guia: 3 mm, 6 mm, 9 mm, 12 mm
- Nivell de soroll: < 60 dB
- Dimensions (LxWxH): 23.3 x 13.3 x 7 Centimeters
- Pes de l'article: 680 grams
- Connectivitat: Càrrega USB
10. Garantia i Suport
VGR provides a 12-month quality warranty for the VGR V-699 Hair Clipper, covering defects in materials and workmanship from the date of original purchase (as per invoice). This warranty does not cover damage caused by intentional or unintentional misuse by the user.
10.1 Initiating a Warranty Claim
To initiate a warranty claim, please contact VGR customer support via email:
- Correu electrònic: WARRANTY@VGRINDIA.CO.IN
In your email, provide a clear description of the problem, include associated pictures if possible, and attach a copy of your original purchase invoice.
10.2 Warranty Resolution
Once your claim has been verified, the company will, at its discretion, either repair the product or, if a repair is not feasible, exchange it. The customer is responsible for the cost of transporting the product to the service center. VGR will cover the cost of transporting the repaired or exchanged product back to the customer.
10.3 Atenció al client
Our customer service team aims to respond to all inquiries within 24 hours.