KEYESTUDIO Micro:bit V2 Robot Starter Kit (Model KS4036F)

KEYESTUDIO Micro:bit V2 Robot Starter Kit Instruction Manual

Model: KS4036F

1. Introducció

This manual provides detailed instructions for assembling, programming, and operating the KEYESTUDIO Micro:bit V2 Robot Starter Kit. This kit is designed for educational purposes, allowing users to learn about robotics and programming using Makecode and Python. Please note that a Micro:bit V2 board and AAA batteries are not included and must be acquired separately.

2. Què hi ha a la caixa

Before beginning assembly, please verify that all components listed below are present in your kit. Refer to the packing list image for visual confirmation.

  • Control remot IR x1
  • Ultrasonic Sensor x1
  • Expansion Board x1
  • AAA Battery Holder x1
  • Acrylic Board x1
  • Rodes x2
  • Straight Screwdriver x1
  • 1 tornavís creuat
  • Universal Wheel x1
  • M3*20mm Nylon Column x4
  • M3*6MM Screws x4
  • M3 femelles x2
  • M3*10MM Screws x6
Packing list for KEYESTUDIO Micro:bit V2 Robot Starter Kit
Figure 2.1: Detailed packing list of all components included in the kit.

3. Instruccions de muntatge

Follow these steps carefully to assemble your robot car. Ensure all connections are secure.

  1. Attach the motors to the main chassis using the provided screws.
  2. Mount the wheels onto the motor shafts.
  3. Secure the universal wheel to the front of the chassis.
  4. Install the battery holder and connect it to the expansion board.
  5. Connect the ultrasonic sensor to the designated pins on the expansion board.
  6. Insert your Micro:bit V2 board (not included) into the expansion board.
Video 3.1: Product animation demonstrating the assembly process of the robot car.

The kit also allows for pin expansion to connect additional sensors or actuators, enhancing the robot's capabilities.

Image showing pin expansion on the robot car
Figure 3.1: Pin expansion options for connecting additional components.

4. Instruccions de funcionament

4.1 Programming the Robot Car

The KEYESTUDIO Micro:bit V2 Robot Starter Kit supports two primary programming methods: Makecode graphical programming and Python programming. Detailed tutorials for both are available.

Image showing Makecode graphical programming and Python programming interfaces
Figura 4.1: Mésview of Makecode graphical programming and Python programming environments.

To program the robot, connect your Micro:bit V2 to your computer via a USB cable. You can then use the Makecode editor or a Python IDE to upload your code. The kit includes detailed instructions for coding various functions.

Video 4.1: Tutorial on controlling the motors of the Micro:bit Smart Car using Makecode.

4.2 Robot Car Functions

The robot car is capable of performing various functions, including:

  • Moviment: Control forward, backward, left, and right movements.
  • Light Following: Program the robot to follow a light source.
  • Seguiment de la línia: Utilize sensors to follow a designated line path.
  • Ultrasonic Following: Maintain a set distance from an object.
  • Evitació d'obstacles: Detect and navigate around obstacles using the ultrasonic sensor.
  • Control remot IR: Control the robot's movements and functions using an infrared remote.
  • Control de l’APP: Control the robot via a dedicated mobile application.
  • RGB Module: Utilize the RGB LEDs for visual feedback and effects.
Diagram illustrating multi-function capabilities including RGB module, follow the light, line tracking, ultrasonic following, ultrasonic obstacle avoidance, infrared remote control, and APP control.
Figura 4.2: Mésview of the robot car's multi-function capabilities.
Images demonstrating APP control, IR control, RGB LED functions, ultrasonic obstacle avoidance, and line tracking.
Figura 4.3: Exemple visualamples of APP control, IR control, RGB LED, ultrasonic obstacle avoidance, and line tracking in action.
Video 4.4: Demonstration of various robot car functions including line tracking, ultrasonic following, IR remote control, obstacle avoidance, light tracking, RGB LEDs, and piano keys.

5. Especificacions

CaracterísticaDetall
MarcaKEYESTUDIO
Número de modelKS4036F (internal: 6f72f465-ca2f-4e63-84be-9ea2479e46b4)
MaterialMetall
Nombre de peces1 (kit)
Sistema d'accionamentTorx
Compatibilitats de bitsMicro:bit V2
Fabricantkeyes
Diagram showing the product dimensions: 78mm height, 99mm length, 58mm width.
Figure 5.1: Product dimensions of the robot car.

6. Manteniment

To ensure the longevity and optimal performance of your KEYESTUDIO Micro:bit V2 Robot Starter Kit, follow these maintenance guidelines:

  • Neteja: Gently wipe the robot car with a dry, soft cloth to remove dust and debris. Avoid using liquid cleaners directly on electronic components.
  • Emmagatzematge: Store the kit in a cool, dry place away from direct sunlight and extreme temperatures. If storing for an extended period, remove the AAA batteries from the battery holder.
  • Comprovació de components: Periodically inspect all connections and screws to ensure they are secure. Loose connections can lead to erratic behavior or component damage.
  • Cura de la bateria: Use only recommended AAA batteries. Replace batteries when performance degrades. Do not mix old and new batteries or different types of batteries.

7. Solució De Problemes

If you encounter issues with your robot car, refer to the following common problems and solutions:

ProblemaPossible causa i solució
El robot no s'encén
  • Comproveu si les piles estan correctament inserides i carregades.
  • Ensure the power switch on the robot car is in the ON position.
  • Verify the Micro:bit V2 board is properly seated in the expansion board.
Motors not responding
  • Confirm motor wires are securely connected to the expansion board.
  • Check your code for correct motor control commands and logic.
  • Ensure the Micro:bit V2 board has successfully uploaded the program.
Els sensors no funcionen
  • Verify sensor connections to the expansion board.
  • Check your code for correct sensor initialization and reading.
  • Ensure sensors are not obstructed.
IR Remote Control not working
  • Check the battery in the IR remote control.
  • Ensure the IR receiver on the robot car is unobstructed and correctly connected.
  • Verify your code includes the necessary IR remote control libraries and logic.

For more in-depth troubleshooting, refer to the detailed instructions provided with the kit, which may include a dedicated troubleshooting PDF.

8. Suport i garantia

8.1 Atenció al client

If you have any questions or require assistance with your KEYESTUDIO Micro:bit V2 Robot Starter Kit, please contact KEYESTUDIO customer support. You can typically find contact information on the product packaging or the official KEYESTUDIO website. For Amazon purchases, you can click on the seller's name ("keyes") and then click "Ask a question" to email them directly.

8.2 Informació de la garantia

KEYESTUDIO products are generally covered by a manufacturer's warranty. Please refer to the warranty card included with your product or the official KEYESTUDIO website for specific warranty terms and conditions. Keep your proof of purchase for warranty claims.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.

After a successful submission, we securely hash the supplied account or form email before sending it to Microsoft Advertising for conversion attribution. Privacy details.