WORKPRO W159025 Cordless 3.6V Grass and Hedge Trimmer User Manual

1. Introducció

The WORKPRO W159025 is a versatile cordless 3.6V grass and hedge trimmer designed for efficient garden maintenance. This tool features a dual-purpose design, allowing for quick conversion between a grass shear and a hedge trimmer. Its lightweight and compact design, combined with Type-C USB charging, makes it convenient for various trimming tasks around your garden.

This manual provides essential information for the safe and effective use, maintenance, and troubleshooting of your WORKPRO W159025 trimmer. Please read it thoroughly before first use and keep it for future reference.

2. Instruccions de seguretat importants

Seguiu sempre les precaucions de seguretat bàsiques quan utilitzeu aparells elèctrics per reduir el risc d'incendi, descàrrega elèctrica i lesions personals.

• Llegeix totes les instruccions: Familiaritzeu-vos amb els controls i l'ús correcte de l'eina.
• Porteu protecció ocular: Utilitzeu sempre ulleres o ulleres de seguretat quan feu servir la desbrossadora.
• Mantenir la zona neta: Ensure the work area is free of debris, children, and pets.
• Evitar l'arrencada accidental: Ensure the safety lock button and operating switch are not engaged unintentionally.
• Utilitzeu el carregador correcte: Only use a 5V/2A adapter for charging. Using a 5V/1A adapter may trigger overvoltage protection and prevent charging.
• Inspeccioneu les fulles: Before each use, check blades for damage or wear. Replace if necessary.
• Fulles segures: Ensure blades are correctly installed and secured before operation.
• Mantingueu les mans allunyades: Never touch the blades while the tool is operating or connected to power.
• Emmagatzema amb seguretat: Guardeu l'eina en un lloc sec i segur fora de l'abast dels nens.

3. Contingut del paquet

Verifiqueu que hi hagi tots els elements en desempaquetar:

• WORKPRO W159025 Main Unit
• Grass Shear Blade (75mm cutting width)
• Hedge Trimmer Blade (120mm cutting width, 7.8mm max cutting diameter)
• Type-C USB Cable (1m)
• Manual d'usuari

4. Producte acabatview

The WORKPRO W159025 features a compact and ergonomic design for comfortable use. Key components include:

• TPR Handle: Proporciona una subjecció còmoda i segura.
• Botó de bloqueig de seguretat: Evita l'activació accidental.
• Operating Switch: Activates the blades.
• Botó d'alliberament de la fulla: Per a canvis de fulla ràpids i sense eines.
• Port de càrrega tipus C: Per a una càrrega còmoda.
• LED Charging Indicator Light: Displays charging status (Red: Charging, Green: Fully Charged, Yellow: Approx. 50% charged).
• Fulles intercanviables: Includes both grass shear and hedge trimmer blades.

Figure 1: WORKPRO W159025 Component Diagram

5. Configuració

5.1. Carregant la bateria

The device is powered by a 3.6V rechargeable battery. Before first use, fully charge the battery.

1. Localitza el port de càrrega tipus C al dispositiu.
2. Connect the provided Type-C USB cable to the charging port.
3. Connect the other end of the USB cable to a 5V/2A USB power adapter (not included).
4. The LED indicator light will show red during charging. It will turn green when fully charged (approximately 2-3 hours). A yellow light indicates approximately 50% charge.

Figura 2: Càrrega de tipus C

5.2. Canvi de fulles

The WORKPRO W159025 allows for easy, tool-free blade changes between the grass shear and hedge trimmer blades.

1. Assegureu-vos que el dispositiu estigui apagat i desconnectat de qualsevol font d'alimentació.
2. Push the two blade release buttons on either side of the blade housing.
3. Carefully remove the installed blade.
4. Align the desired blade (grass shear or hedge trimmer) with the pins on the main unit.
5. Press the blade firmly into place until it clicks securely.

Figure 3: Blade Change Mechanism

6. Instruccions de funcionament

6.1. Encès / apagat

The WORKPRO W159025 features a dual safety mechanism to prevent accidental starts.

1. To start the tool, simultaneously press the safety lock button (located on the top of the handle) and the operating switch (trigger).
2. Once the tool starts, you can release the safety lock button, and the tool will continue to operate as long as the operating switch is pressed.
3. To turn off the tool, release the operating switch.

Figure 4: Safety Lock and Operating Switch

6.2. Using the Grass Shear

Attach the grass shear blade for trimming grass in small areas, around edges, or where larger mowers cannot reach.

• Ensure the grass shear blade is securely attached.
• Hold the tool firmly with both hands, if possible, or one hand if comfortable and safe.
• Activate the tool as described in Section 6.1.
• Move the tool steadily across the grass, maintaining a consistent height. The cutting width is 75mm.

Figure 5: Grass Shearing Operation

6.3. Using the Hedge Trimmer

Attach the hedge trimmer blade for shaping shrubs and hedges. The cutting width is 120mm, and the maximum cutting diameter is 7.8mm.

• Ensure the hedge trimmer blade is securely attached.
• Hold the tool firmly, ensuring a stable grip.
• Activate the tool as described in Section 6.1.
• Move the trimmer smoothly along the hedge, cutting small amounts at a time. Avoid forcing the blades through thick branches.
• The handle can rotate 180 degrees for improved ergonomics and access to different angles. To rotate the handle, press the handle rotation button (if present, otherwise manually rotate if designed for it) and adjust to the desired position.

Figure 6: Hedge Trimming Operation

7. Manteniment

7.1. Cleaning and Blade Care

• Always ensure the tool is switched off and the battery is removed (if applicable) before cleaning or performing maintenance.
• Clean the blades after each use to remove sap, debris, and dirt. Use a stiff brush and a damp cloth. For stubborn residue, a blade cleaner or light oil can be used.
• Periodically apply a thin layer of machine oil to the blades to prevent rust and ensure smooth operation.
• Inspect blades for sharpness and damage. Dull or damaged blades can reduce efficiency and increase strain on the motor. Replace worn blades as needed.

7.2. Emmagatzematge

• Store the tool in a dry, well-ventilated area, away from direct sunlight and extreme temperatures.
• Ensure the blades are clean, dry, and lightly oiled before storage.
• Keep the tool out of reach of children and unauthorized persons.

8. Solució De Problemes

9. Especificacions

10. Garantia i Suport

For warranty information, technical support, or replacement parts, please contact WORKPRO customer service or refer to the official WORKPRO weblloc web. Conserveu el rebut de compra com a comprovant de compra.

Per a més ajuda, podeu visitar el WORKPRO Store on Amazon.