ELAC Varro Dual Reference DS1200 Powered Subwoofer User Manual

1. Introducció

Gràcies per la compraasing the ELAC Varro Dual Reference DS1200 Powered Subwoofer. This manual provides essential information for the proper setup, operation, and maintenance of your new subwoofer. Please read these instructions thoroughly before use to ensure optimal performance and safety.

2. Instruccions de seguretat

• Font d'alimentació: Connect the subwoofer only to an AC power outlet of the specified voltage (100-240V AC, 50/60Hz).
• Ventilació: Ensure adequate ventilation around the subwoofer. Do not block any ventilation openings. Maintain a minimum distance of 4 inches (10 cm) from walls or other objects.
• Col·locació: Place the subwoofer on a stable, level surface. Avoid placing it near heat sources, direct sunlight, or in areas with high humidity or dust.
• Aigua i humitat: Do not expose the subwoofer to water or moisture. Do not place objects filled with liquids, such as vases, on or near the unit.
• cables: Protect power cords from being walked on or pinched. Do not pull the power cord to disconnect from the outlet.
• Manteniment: No intenteu atendre aquest producte vosaltres mateixos. Consulteu tots els serveis a personal de servei qualificat.
• Neteja: Desconnecteu el cable d'alimentació abans de netejar. Feu servir un drap suau i sec. No utilitzeu netejadors líquids ni aerosols.

3. Contingut del paquet

Verifiqueu que tots els elements estiguin presents a l'embalatge:

• ELAC Varro Dual Reference DS1200 Powered Subwoofer
• Cable d'alimentació
• Manual d'usuari (aquest document)

4. Producte acabatview

Davant View

Figura 4.1: Frontal view of the ELAC Varro DS1200 subwoofer, showcasing the 12-inch HEX surround woofer and gloss black finish.

Figura 4.2: Frontal view of the ELAC Varro DS1200 subwoofer with the protective grille attached, maintaining its sleek appearance.

Panell posterior i connexions

Figure 4.3: Rear panel of the ELAC Varro DS1200 subwoofer, detailing the input/output options and controls.

The rear panel provides all necessary connections for integrating the subwoofer into your audio system. Key connections include:

• Entrades RCA: Standard unbalanced inputs for connecting to most AV receivers or pre-ampaixecadors.
• Balanced XLR Inputs: Professional-grade balanced inputs for longer cable runs and reduced noise interference.
• Entrades de nivell d'altaveu: Permet la connexió directament des del vostre amplifier's speaker outputs, useful for systems without dedicated subwoofer outputs.
• Disparador de 12 V: For automatic power on/off synchronization with other components.
• Port Ethernet: For third-party control systems and network connectivity.
• Port USB: Per a actualitzacions de firmware.
• Entrada d'alimentació: For connecting the included power cord.

lateral View

Figura 4.4: lateral view of the ELAC Varro DS1200 subwoofer, highlighting its compact design with the grille in place.

5. Configuració

5.1 Col·locació

Subwoofer placement significantly impacts bass performance. Experiment with different locations in your room to find the best balance of output and smoothness. Common placement options include:

• Col·locació de la cantonada: Often provides the most output but can sometimes lead to boomy bass.
• Col·locació de la paret frontal: Near the main speakers, can improve integration with the front soundstage.
• Mid-Room Placement: Can offer smoother bass response but may require more power.

Consider using the 'subwoofer crawl' method: place the subwoofer in your primary listening position, play bass-heavy music, and crawl around the room to find where the bass sounds best. That location is often ideal for the subwoofer.

5.2 Connexió al vostre sistema

Ensure all audio equipment is powered off before making connections.

RCA/XLR Connection (Recommended for AV Receivers)

1. Connect an RCA or XLR cable from your AV receiver's 'Subwoofer Out' or 'LFE Out' to the corresponding RCA or XLR input on the DS1200 subwoofer.
2. If using a stereo pre-amplifier with a dedicated subwoofer output, connect it similarly.

Speaker-Level Connection (For Amplifiers without Subwoofer Output)

1. Connecteu els cables dels altaveus del vostre amplifier's left and right speaker outputs to the 'Speaker Level Input' terminals on the DS1200.
2. Then, connect your main speakers to the 'Speaker Level Output' terminals on the DS1200. Ensure correct polarity (+ to + and - to -).

5.3 Connexió d'alimentació

1. Connect the included power cord to the power inlet on the rear of the subwoofer.
2. Connecteu l'altre extrem del cable d'alimentació a una presa de corrent de CA adequada.

6. Funcionament

6.1 Encès inicial

After making all connections, switch on the power to the subwoofer. The power indicator light will illuminate. If your receiver has an auto-setup feature (e.g., Audyssey, MCACC, YPAO), run it now to calibrate the subwoofer with your system.

6.2 Basic Adjustments

For initial listening, set the subwoofer's volume to a moderate level. Adjust the crossover frequency and phase settings as needed. For precise control and optimization, utilize the ELAC Varro App.

7. App Control and Auto EQ

The ELAC Varro DS1200 features advanced control and room correction capabilities via a dedicated smartphone application.

7.1 Baixant l'aplicació

Download the 'ELAC Varro' app from the Apple App Store (for iOS devices) or Google Play Store (for Android devices).

7.2 Connecting to the Subwoofer

1. Assegureu-vos que el Bluetooth del vostre telèfon intel·ligent estigui activat.
2. Open the ELAC Varro app. The app will search for available ELAC subwoofers.
3. Select your DS1200 from the list to establish a connection.

7.3 Característiques de l'aplicació

The app provides comprehensive control over your subwoofer's settings, including:

• Control de volum: Precise adjustment of output level.
• Freqüència d'encreuament: Set the upper frequency limit for the subwoofer.
• Control de fase: Adjust the phase to ensure seamless integration with your main speakers.
• EQ paramètric: Fine-tune specific frequency bands to address room acoustics.
• Auto EQ: Utilizes your smartphone's microphone to measure and automatically correct the subwoofer's response for your room, optimizing bass performance.

8. Manteniment

8.1 Neteja

To clean the subwoofer, first disconnect it from the power outlet. Use a soft, dry, lint-free cloth to wipe the surfaces. Avoid using abrasive cleaners, solvents, or chemical sprays, as these can damage the finish.

8.2 Atenció general

Periodically check all cable connections to ensure they are secure. Avoid placing heavy objects on the subwoofer or exposing it to extreme temperatures.

9. Solució De Problemes

If you experience issues with your ELAC Varro DS1200 subwoofer, refer to the following common problems and solutions:

If the problem persists after trying these solutions, please contact ELAC customer support.

10. Especificacions

The following are the technical specifications for the ELAC Varro Dual Reference DS1200 Powered Subwoofer:

• Model: Varro Dual Reference DS1200
• Tipus d'altaveu: Subwoofer alimentat
• Diàmetre del woofer: Dual de 12 polzades
• AmpPotència més viva: 1200 Watts RMS (2400 Watts Peak)
• Resposta de freqüència: 17Hz-150Hz (Anechoic) / 14Hz-150Hz (In-Room)
• Tecnologia de connectivitat: Wired (RCA, XLR, Speaker Level, Ethernet, USB)
• Mètode de control: Control d'aplicacions
• Característiques addicionals: App Control, Auto EQ, 12V Trigger
• Color: Negre brillant
• Dimensions de l'article (D x W x H): Aproximadament 63.5 cm x 56.5 cm x 63.5 cm
• Pes de l'article: 98 lliures (44.45 kg)
• Font d'alimentació: Elèctric amb cable
• Entrada Voltage: 12 Volts (for trigger)
• UPC: 853720006698

Figure 10.1: Approximate dimensions of the ELAC Varro DS1200 subwoofer.

11. Garantia i Suport

11.1 Garantia limitada

The ELAC Varro Dual Reference DS1200 Powered Subwoofer comes with a 1 anys de garantia limitada. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by misuse, accident, unauthorized modification, or improper installation.

11.2 Atenció al client

For technical assistance, warranty inquiries, or service requests, please visit the official ELAC website or contact your authorized ELAC dealer. Please have your model number (DS1200) and serial number ready when contacting support.