ECOELER 6-Inch LED Motion Sensor Ceiling Light

Introducció

This manual provides detailed instructions for the installation, operation, and maintenance of your ECOELER 6-Inch LED Motion Sensor Ceiling Light, Model CDR615C. This fixture features 16W power, 1000 lumens brightness, 3CCT selectable color temperature, and an adjustable motion sensor with timer countdown. Please read this manual thoroughly before installation and use to ensure proper function and safety.

Informació de seguretat

Si us plau, observeu les següents precaucions de seguretat per evitar lesions o danys:

• ADVERTÈNCIA: Risc de descàrrega elèctrica. Desconnecteu l'alimentació al fusible o al disjuntor abans d'instal·lar o fer el servei.
• Aquest producte s'ha d'instal·lar d'acord amb el codi d'instal·lació aplicable per una persona familiaritzada amb la construcció i el funcionament del producte i els perills que comporta.
• Assegureu-vos que totes les connexions elèctriques siguin segures i que compleixin els codis i les ordenances locals.
• No intenteu modificar l'aparell. Qualsevol modificació pot anul·lar la garantia i crear riscos per a la seguretat.
• Do not install near heat sources or in areas with excessive moisture. This fixture is rated for indoor use.
• Utilitzeu ulleres i guants de seguretat durant la instal·lació.

Què hi ha a la caixa

Verifiqueu que tots els components siguin presents abans de començar la instal·lació:

• Motion sensor ceiling light fixture
• Adaptador E26 (per a instal·lació de llaunes encastades)
• Maquinari de muntatge (cargols, femelles de cable)
• Manual d'instruccions (aquest document)

Image: Included components and dimensions of the light fixture (7.48 inches diameter, 1.45 inches height).

Característiques del producte

The ECOELER LED Motion Sensor Ceiling Light is designed with advanced features for convenience and energy efficiency.

Imatge: Més deview of product features including PIR Motion Sensor, 3 Color Temperatures, and Time Delay adjustment.

3CCT Selectable Color Temperature

This fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). You can easily select your preferred lighting ambiance by adjusting a switch located inside the lampombra. Note: This light is non-dimmable.

Image: Visual representation of 3000K, 4000K, and 5000K color temperatures.

Funcionalitat del sensor de moviment

The integrated Passive Infrared (PIR) motion sensor automatically detects movement within its range. The light will turn on when motion is sensed and ambient light conditions are dark enough. It will remain off in bright environments to save energy.

Retard de temps ajustable

The light features an adjustable time delay, allowing you to set how long the light remains on after motion stops. Options include 30 seconds, 1 minute, and 5 minutes.

Image: A person walking under the light, illustrating the countdown timer for 30 seconds, 1 minute, and 5 minutes.

Instruccions d'instal·lació

Before installation, ensure the power supply is turned off at the circuit breaker. This fixture can be installed in a junction box or a recessed can.

Image: Installation diagrams for Junction Box and Recessed Can.

Junction Box Installation (3.5 or 4-inch J-Box)

1. Apagueu l'alimentació a l'interruptor.
2. Remove the existing fixture from the junction box.
3. Connect the fixture's wires to the junction box wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green/bare copper (ground).
4. Secure the fixture to the junction box using the provided screws.
5. Ensure the fixture is flush with the ceiling.
6. Restaura l'alimentació i prova la llum.

Recessed Can Installation (5 or 6-inch Can)

1. Apagueu l'alimentació a l'interruptor.
2. Si escau, traieu la bombeta i l'embellidor existents de la llauna encastada.
3. Screw the E26 adapter into the recessed can's socket.
4. Connect the fixture's wires to the E26 adapter's wires using the provided wire nuts.
5. Attach the spring tabs (if not pre-attached) to the fixture.
6. Gently push the fixture into the recessed can until the spring tabs secure it in place.
7. Restaura l'alimentació i prova la llum.

Instruccions de funcionament

Ajust de la temperatura de color (CCT)

Per canviar la temperatura de color:

1. Assegureu-vos que l'alimentació estigui apagada.
2. Carefully open or remove the lampombra.
3. Locate the CCT selection switch on the fixture's circuit board.
4. Slide the switch to your desired setting: 3000K, 4000K, or 5000K.
5. Torneu a connectar la lampombra de manera segura.
6. Restaura el poder.

Configuració del retard de temps

To adjust the time the light stays on after motion ceases:

1. Assegureu-vos que l'alimentació estigui apagada.
2. Carefully open or remove the lampombra.
3. Locate the time delay switch on the fixture's circuit board.
4. Slide the switch to your desired setting: 30 seconds, 1 minute, or 5 minutes.
5. Torneu a connectar la lampombra de manera segura.
6. Restaura el poder.

Funcionament del sensor de moviment

The motion sensor operates based on ambient light levels and detected movement:

• Dia: The light will remain OFF even if motion is detected, conserving energy.
• Entorns nocturns/foscos: The light will automatically turn ON when motion is sensed within its detection range (9-16 feet).
• Apagat automàtic: After motion stops, the light will turn OFF after the pre-set time delay (30s, 1min, or 5min).

Image: Visual guide to motion sensor behavior during day and night.

Manteniment

To ensure optimal performance and longevity of your ECOELER LED Motion Sensor Ceiling Light, follow these simple maintenance guidelines:

• Neteja: Desconnecteu l'alimentació abans de netejar. Feu servir un drap suau, sec o lleugerament sec.amp cloth to wipe the exterior of the fixture. Do not use abrasive cleaners or solvents, as they may damage the finish or electronic components.
• Inspecció: Periodically check for any loose connections or signs of damage. If any issues are found, consult a qualified electrician.
• Substitució de bombetes: This LED fixture does not have user-replaceable bulbs. The LED components are designed for long-term use.

Resolució de problemes

If you encounter issues with your light, refer to the table below for common problems and solutions:

Especificacions

Garantia i Suport

Informació de la garantia: All ECOELER products come with a 1-year warranty from the date of purchase. For any non-man-made damage under normal use, please contact our support team for a replacement solution.

Atenció al client: If you have any questions, require assistance with installation, or need to claim your warranty, please visit the official ECOELER store or contact our customer service team. You can find more information and contact details on the ECOELER Brand Store.