MEXYBE M2 Digital TDS Water Tester Instruction Manual

Introducció

The MEXYBE M2 Digital TDS Water Tester is designed to provide a simple and reliable method for assessing water quality. This device measures the Total Dissolved Solids (TDS) in water, which indicates the combined content of all inorganic and organic substances contained in a liquid in molecular, ionized, or micro-granular suspended form. Understanding your water's TDS level is crucial for ensuring the quality of drinking water, aquarium water, and water used in various applications.

The MEXYBE M2 TDS meter helps you determine the safety and quality of your water.

Producte acabatview

The MEXYBE M2 TDS Water Tester features a high-precision chip and a premium titanium alloy probe for accurate and reliable results. Its compact design makes it easy to use and carry.

Components of the MEXYBE M2 Digital TDS Water Tester:

• Two Replaceable Batteries: Alimenta el dispositiu.
• Energy-Efficient Chipset: Ensures accurate readings and efficient power consumption.
• High-Definition Display Screen: Shows TDS readings clearly.
• Botó On/Off: Per encendre o apagar el dispositiu.
• Lock Button (HOLD): To freeze the displayed reading.
• Submersion Line: Indicates the maximum depth for immersing the probe.
• Highly Sensitive Titanium Alloy Probe: For precise measurement.
• High-Sensitivity Sensor: Detects dissolved solids efficiently.
• Tapa de bolígraf: Protegeix la sonda quan no s'utilitza.

Powerful Chip

Sensitive Probe

Pantalla LED HD

Configuració

1. Desembalar: Carefully remove the TDS meter from its packaging.
2. Treure la tapa: Take off the protective cap from the bottom of the meter to expose the electrodes.
3. Comprovació de la bateria: The device comes with pre-installed batteries. If the display does not light up, replace the batteries (refer to the Maintenance section for battery replacement).

Instruccions de funcionament

Follow these steps to accurately measure the TDS level of your water sampLI:

1. Preparar SampLI: Pour the water you wish to test into a clean container.
2. Activar: Premeu el botó ON/OFF button to power on the TDS meter. The display will show "000" or a previous reading.
3. Sonda d'immersió: Dip the electrode end of the meter into the water sample. Ensure the water level does not exceed the submersion line indicated on the device.
4. Estabilitzar la lectura: Gently stir the meter in the water to remove any air bubbles. Wait for the reading on the display to stabilize (typically a few seconds).
5. Lock Reading (Optional): Premeu el botó MANTENIM button to freeze the displayed reading for easier viewing. Press it again to release the hold.
6. Lectura de registres: Note down the TDS value displayed in parts per million (ppm).
7. Netejar i emmagatzemar: After use, shake off excess water, gently wipe the probe with a clean cloth, and replace the protective cap. Turn off the meter by pressing the ON/OFF botó.

Press the ON/OFF button to activate the meter and the HOLD button to freeze the reading.

Immerse the probe into the water sample up to the submersion line.

Understanding TDS Readings

This chart provides a general guideline for interpreting TDS values:

TDS (ppm)	Qualitat de l'aigua
0-50	Ideal drinking water
50-100	Comparatively ideal drinking water
100-200	High hardness water
200-300	Marginalment acceptable
300-400	Scale will form
400-500	The taste is not very pleasant
500+	U.S. EPA's maximum contamination level

Nota: High TDS water may affect kidney function in some people. The TDS meter is affected by external factors, and the error range is ±2% FS of the measurement range. Refer to EPA-40 CFR Part 141 «Drinking Water Standards and Regulations» for detailed guidelines (TDS ≤ 500 ppm).

Manteniment

• Neteja: After each use, rinse the electrode probe with distilled water and gently wipe it dry with a clean, soft cloth. Do not use abrasive materials or harsh chemicals.
• Emmagatzematge: Always replace the protective cap after use. Store the meter in a cool, dry place away from direct sunlight and extreme temperatures.
• Substitució de la bateria: When the display becomes dim or the meter fails to turn on, it's time to replace the batteries. Open the battery compartment (usually located at the top or back of the device), replace the old batteries with new ones of the correct type (typically button cells), ensuring correct polarity. Close the compartment securely.
• Calibració: The MEXYBE M2 TDS meter is factory calibrated. If you suspect inaccurate readings over time, you may need to recalibrate it using a standard TDS calibration solution (e.g., 342 ppm NaCl solution). Refer to specific calibration instructions if provided with your device or contact customer support.

Resolució de problemes

Especificacions

• Número de model: M2
• Interval de mesura: 0-9990 ppm (parts per million)
• Precisió: ±2% FS
• Dimensions: Aproximadament 5.63 x 1.14 x 0.67 polzades
• Pes de l'article: Aproximadament 1.44 unces
• Fabricant: MEXYBE

Garantia i Suport

MEXYBE is committed to providing high-quality products and excellent customer service. Your MEXYBE M2 Digital TDS Water Tester comes with a Garantia de 36 mesos sense problemes.

For any questions, concerns, or support needs, please contact our dedicated team of water quality experts. We offer rapid and efficient responses round the clock through live chat and email. Your feedback is important to us as we strive to deliver products and services that provide genuine value.

Please refer to the contact information provided with your product packaging or visit the official MEXYBE weblloc per obtenir detalls de suport.