ODK Desk with Adjustable Monitor Stand Instruction Manual

Introducció

Thank you for choosing the ODK Desk with Adjustable Monitor Stand. This manual provides essential information for the proper assembly, operation, and maintenance of your new desk. Please read it thoroughly before beginning assembly and keep it for future reference.

Image: The ODK Desk, featuring a black wood grain finish, a raised monitor shelf, and a fabric storage bag attached to the side. Two monitors are placed on the upper shelf, and a keyboard, mouse, and other office supplies are on the main desk surface.

Informació de seguretat

• Assegureu-vos que totes les peces estiguin presents i no estiguin danyades abans del muntatge. No utilitzeu el producte si hi falta alguna peça o si està trencada.
• Munta l'escriptori sobre una superfície suau i neta per evitar ratllades.
• No estrenyeu massa els cargols durant el muntatge per evitar danys al material.
• Mantingueu les peces petites allunyades dels nens.
• No supereu la capacitat màxima de pes de l'escriptori.
• Reviseu regularment totes les connexions per assegurar-vos que romanen ben ajustades.

Llista de peces

Abans del muntatge, comproveu que tots els components que s'enumeren a continuació estiguin inclosos al paquet.

Muntatge i muntatge

Seguiu aquests passos amb cura per a un muntatge correcte. Es recomana que hi hagi dues persones per al muntatge.

1. Step 1: Attach Leg Frames to Main Desktop.

   Place the Main Desktop Panel (A) upside down on a soft surface. Align the Left Leg Frame (C) and Right Leg Frame (D) with the pre-drilled holes on the underside of the desktop. Secure them using Screws (S1) and the Allen Wrench (T1). Do not fully tighten yet.
2. Step 2: Install Adjustable Feet.

   Screw the Adjustable Feet (H) into the bottom of each leg frame. Once the desk is upright, these can be adjusted to level the desk on uneven floors.

3. Step 3: Attach Monitor Shelf Support Rods.

   Identify the attachment points for the Monitor Shelf Support Rods (E) on the main desktop. Secure the rods using Screws (S2). Ensure they are firmly attached.

4. Step 4: Position Monitor Shelf.

   Place the Monitor Shelf Panel (B) onto the Monitor Shelf Support Rods (E). The shelf has pre-drilled holes that align with the rods. Secure the shelf to the rods using Screws (S2). The monitor shelf can be adjusted to three different heights (10 cm, 13 cm, 16 cm) by selecting the appropriate holes on the support rods during this step.

   

   Imatge: Una imatge detallada view of the monitor shelf, highlighting its adjustable height feature. The image shows the shelf positioned above the main desk surface, ready to hold monitors.

5. Step 5: Attach Side Storage Bag and Headphone Hook.

   Attach the Side Storage Bag (F) to the designated hooks or attachment points on one of the leg frames. Similarly, attach the Headphone Hook (G) to the other side or a suitable location on the frame.

   

   Image: A close-up of the desk's left side, showing the fabric storage bag hanging from the frame, filled with books and documents. The right side shows a headphone hook attached to the frame.
6. Pas 6: Ajustament final.

   Once all components are assembled, carefully tighten all screws (S1 and S2) to ensure the desk is stable and secure. Do not overtighten.

Instruccions de funcionament

Adjusting Monitor Shelf Height:

The monitor shelf offers three adjustable height options: 10 cm, 13 cm, and 16 cm above the main desktop. To change the height, you will need to partially disassemble the monitor shelf from its support rods. Choose the desired set of pre-drilled holes on the support rods (E) and re-secure the Monitor Shelf Panel (B) using Screws (S2).

Leveling the Desk:

If your desk wobbles, adjust the Adjustable Feet (H) located at the bottom of each leg frame. Turn them clockwise to raise a corner and counter-clockwise to lower it until the desk is stable on your floor surface.

Manteniment i cura

• Neteja: Netegeu les superfícies de l'escriptori amb un drap suau iamp drap. Eviteu utilitzar productes químics agressius o netejadors abrasius, que poden danyar l'acabat.
• Comprovacions periòdiques: Periodically check all screws and connections to ensure they are tight. Retighten if necessary, but do not overtighten.
• Eviteu la humitat: Protect the desk from excessive moisture and direct sunlight to prevent warping or discoloration.
• Distribució de pes: Distribute weight evenly across the desk surface. Avoid placing excessively heavy items on one spot.

Resolució de problemes

Especificacions

• Número de model: SJFZ-01
• Marca: ODK
• Color: Negre
• Material: Fusta dissenyada, Metall
• Dimensions totals (L x A x A): 120 x 50 x 84 cm (47.2 x 19.7 x 33.1 polzades)
• Pes del producte: Aproximadament 11.91 kg (26.26 lliures)
• Monitor Shelf Adjustable Heights: 10 cm, 13 cm, 16 cm (from main desktop)
• Característica especial: Adjustable Monitor Shelf, Side Storage Bag, Headphone Hook

Garantia i Suport

Specific warranty information is not provided in the product details. For any questions regarding assembly, missing parts, or product defects, please contact ODK customer support through the retailer where the product was purchased. Please have your model number (SJFZ-01) and purchase details ready when contacting support.

For further assistance, you may refer to the product page on Amazon.com.be: ODK Desk Product Page