Sena 3S Plus Bluetooth System Universal Microphone Kit User Manual

1. Introducció

This manual provides detailed instructions for the proper use and maintenance of your Sena 3S Plus Bluetooth System Universal Microphone Kit. Please read this manual thoroughly before operating the device to ensure optimal performance and safety.

The Sena 3S Plus is a compact and powerful Bluetooth intercom system designed for motorcycle helmets, offering two-way HD intercom communication, music listening, and phone call capabilities.

2. Contingut del paquet

Verifiqueu que tots els components siguin presents al vostre paquet:

• Sena 3S Plus Bluetooth System Universal Microphone
• Cable de càrrega USB-C
• Mounting Accessories (e.g., hook and loop fasteners, speaker pads)
• Manual d'usuari (aquest document)

Image 1: Sena 3S Plus Bluetooth System Universal Microphone Kit. This image displays the main unit and included accessories.

3. Producte acabatview

Familiarize yourself with the main components and controls of your Sena 3S Plus unit.

3.1 Unitat principal

• Botó principal: Used for power on/off, pairing, and intercom functions.
• Botó per pujar el volum: Increases volume, navigates menus.
• Botó per baixar el volum: Decreases volume, navigates menus.
• Port USB-C: Per a la càrrega i les actualitzacions de firmware.
• Micròfon: Integrat per a la comunicació de veu.
• Ponents: Per a la sortida d'àudio.

Note: Specific button locations and designs may vary slightly depending on the universal microphone kit type (boom or wired).

4. Instal·lació i configuració

Follow these steps to install the Sena 3S Plus into your helmet.

4.1 Muntatge de la unitat principal

1. Tria la ubicació: Select a flat surface on the left side of your helmet, near the bottom edge, for optimal microphone and speaker placement.
2. Superfície neta: Clean the chosen area thoroughly with an alcohol wipe and let it dry completely.
3. Attach Hook and Loop Fastener: Peel the backing from the hook and loop fastener (velcro) and firmly press it onto the helmet surface.
4. Connecteu la unitat principal: Align the main unit with the fastener and press firmly to secure it.

4.2 Instal·lació d'altaveus

1. Locate Ear Pockets: Identify the ear pockets inside your helmet.
2. Attach Speaker Pads: If necessary, use the provided speaker pads to adjust the speaker depth for comfort and clear audio.
3. Insert Speakers: Place the speakers into the ear pockets, ensuring they are centered over your ears. Route the speaker wires neatly under the helmet padding.

4.3 Col·locació del micròfon

The 3S Plus comes with a universal microphone kit, which typically includes options for boom or wired microphones. Choose the one suitable for your helmet type (open-face/modular for boom, full-face for wired).

1. Micròfon de braç: Attach the boom microphone to the inside of the helmet, positioning the microphone capsule approximately 1-2 cm from your mouth.
2. Micròfon amb cable: For full-face helmets, attach the wired microphone to the inside of the chin bar, ensuring it is close to your mouth and not obstructed.

Important: Ensure all wires are tucked away and do not interfere with helmet removal or comfort.

5. Instruccions de funcionament

5.1 Engegada/apagada

• Encès: Manteniu premut el botó Botó principal for 1 second. The LED will flash blue.
• Apagar: Manteniu premut el botó Botó principal for 5 seconds. The LED will flash red and the unit will power off.

5.2 Ajust de volum

• Augmenta el volum: Toqueu Botó per augmentar el volum.
• Disminueix el volum: Toqueu Botó cap avall de volum.

5.3 Càrrega

The Sena 3S Plus features USB-C charging.

1. Connect the supplied USB-C cable to the USB-C port on the main unit.
2. Connecteu l'altre extrem del cable a una font d'alimentació USB (per exemple, un port USB de l'ordinador o un adaptador de paret USB).
3. The LED will glow red during charging and turn blue when fully charged.

A full charge typically takes approximately 2.5 hours and provides up to 8 hours of talk time.

6. Emparellament Bluetooth

6.1 Emparellament amb un telèfon mòbil

1. With the 3S Plus powered off, press and hold the Botó principal for 5 seconds until the LED flashes red and blue alternately. You will hear "Phone pairing".
2. Al telèfon mòbil, activeu el Bluetooth i cerqueu dispositius.
3. Select "Sena 3S Plus" from the list of detected devices.
4. Si se us demana, introduïu el PIN "0000".
5. Once paired, the LED will flash blue every 5 seconds.

6.2 Pairing with another Sena Headset for Intercom

The Sena 3S Plus supports two-way HD intercom communication.

1. Ensure both 3S Plus units are powered on.
2. On Unitat A, manteniu premut el botó Botó principal durant 5 segons fins que el LED parpellegi en vermell i blau alternativament.
3. On Unitat B, manteniu premut el botó Botó principal durant 5 segons fins que el LED parpellegi en vermell i blau alternativament.
4. The units will automatically search for each other and pair. Once paired, the LEDs on both units will flash blue.
5. To start/end intercom conversation, tap the Botó principal a qualsevol unitat.

The intercom range is up to 400 meters (approximately 1/4 mile) in open terrain.

7. Manteniment i cura

• Neteja: Netegeu la unitat amb un suau, damp tela. No utilitzeu productes químics o dissolvents aggressivs.
• Emmagatzematge: Guardeu el dispositiu en un lloc fresc i sec quan no l'utilitzeu.
• Cura de la bateria: To prolong battery life, charge the unit at least once every six months if not used regularly. Avoid extreme temperatures.
• Resistència a l'aigua: The unit is designed to be water-resistant, but avoid submerging it in water.

8. Solució De Problemes

8.1 Restabliment de fàbrica

If the unit is not functioning correctly, a factory reset may resolve the issue. To perform a factory reset:

1. Amb la unitat engegada, premeu i manteniu premut el botó Botó principal durant 12 segons.
2. The LED will flash red rapidly, and you will hear "Factory reset".
3. The unit will power off. Power it on again to use.

Avís: A factory reset will delete all Bluetooth pairing information and settings.

9. Especificacions

Nota: Les especificacions estan subjectes a canvis sense previ avís.

10. Garantia i Suport

10.1 Informació de la garantia

The Sena 3S Plus Bluetooth System Universal Microphone Kit comes with a manufacturer's warranty. Please refer to the warranty card included in your package or visit the official Sena weblloc web per obtenir informació detallada sobre els termes i condicions de la garantia.

Conserveu el vostre comprovant de compra per a reclamacions de garantia.

10.2 Atenció al client

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Sena customer support:

• Weblloc: www.sena.com/support
• Correu electrònic: Refer to the Sena weblloc web per al correu electrònic de contacte.
• Telèfon: Refer to the Sena weblloc web per a números de telèfon de contacte.

Before contacting support, please have your product model number (3SPLUS-WB-10) and purchase date available.