Introducció
The RecPro RV Tank Sensor Monitor Panel, Model RP-2310, is designed to provide real-time monitoring of your recreational vehicle's essential fluid levels and battery status. This panel allows you to easily check the levels of your propane (LPG), fresh water, black water, and gray water tanks, as well as your RV's battery charge. It also integrates control switches for your water pump and both electric and gas water heaters. This manual provides detailed instructions for the proper installation, operation, and maintenance of your monitor panel.
Imatge: Frontal view of the RecPro RV Tank Sensor Monitor Panel, showing the display and control switches.
Informació de seguretat
- Desconnecteu sempre l'alimentació abans de la instal·lació o el manteniment.
- Assegureu-vos que totes les connexions del cablejat estiguin ben fixades i degudament aïllades per evitar curtcircuits.
- Refer to your RV's electrical diagrams and local codes for proper wiring practices.
- This device operates on a 12V DC system. Do not connect to higher voltage fonts.
Configuració i instal·lació
- Col·locació del panell: Select a suitable location within your RV for mounting the monitor panel. Ensure it is easily accessible and visible.
- Retall: Carefully measure the dimensions of the panel and create a precise cutout in the mounting surface. Refer to the dimensions image for exact measurements.
- Connexions de cablejat: Connect the panel to your RV's 12V DC power supply, tank sensors, water pump, and water heater circuits according to the provided wiring diagram.
- Alimentació 12V +
- 12V Power -
- Power To Water Pump
- LP Tank Sensor
- Dipòsit d'aigua dolça
- Gray Water Tank
- Dipòsit d'aigua negra
- Water Heater Fault
- Escalfador d'aigua elèctric
- Escalfador d'aigua a gas
- Panell segur: Once all connections are made and verified, secure the panel into the cutout using appropriate fasteners.
Image: Detailed wiring diagram for the RecPro RV Tank Sensor Monitor Panel, Model RP-2310.
Imatge: Part posterior view of the monitor panel, showing the various wire connections.
Image: Diagram illustrating the physical dimensions of the RecPro RP-2310 monitor panel.
Instruccions de funcionament
The RecPro RV Tank Sensor Monitor Panel features LED indicators and rocker switches for easy operation.
- Encès: Ensure your RV's 12V DC power is supplied to the monitor panel.
- Tank Level Monitoring:
- Press the corresponding button for GLP (Propane), BAT (Battery), FRESC, NEGRE, o GRIS a view the level of that specific tank or battery.
- LED indicators labeled E (Empty), 1/3, 2/3, i F (Full) will illuminate to show the approximate level.
- For the battery, L (Baix), F (Fair), G (Good), and C (Charged) LEDs indicate the charge status.
- Indicador d'error: El flt LED will light up if a fault is detected in the water heater system.
- Control de la bomba d'aigua: Utilitza el BOMBA D'AIGUA rocker switch to turn your RV's water pump on or off.
- Water Heater Control: Utilitza el WATER HEATER ELECTRIC i WATER HEATER GAS rocker switches to activate your water heater using either electric or gas power, respectively.
Imatge: Primer pla view of the monitor panel, detailing the LED indicators and control switches.
Manteniment
- Neteja: Clean the panel surface with a soft, damp drap. Eviteu productes de neteja o dissolvents abrasius.
- Inspecció: Comproveu periòdicament totes les connexions del cablejat per comprovar si estan ben ajustades i si hi ha signes de corrosió.
- Comprovació del sensor: If tank readings appear inaccurate, inspect the tank sensors for debris or damage.
Resolució de problemes
- Sense alimentació al panell:
- Check the 12V DC power supply to the panel.
- Verify fuse integrity in the RV's electrical system.
- Ensure all power connections to the panel are secure.
- Inaccurate Tank Readings:
- Confirm that tank sensors are properly connected to the panel.
- Inspect tank sensors for blockages or damage.
- Ensure the tank is not overfilled or completely empty, which can sometimes cause sensor misreadings.
- Water Pump/Heater Not Activating:
- Check the 12V DC power supply to the pump/heater.
- Verify the corresponding rocker switch is in the correct position.
- Check for blown fuses in the pump/heater circuit.
- If the water heater fault (FLT) light is on, consult your water heater's manual for specific troubleshooting steps.
Especificacions
| Model | RP-2310 |
| Marca | RecPro |
| Entrada de potència | 12V DC |
| Monitors | Propane (LPG), Fresh Water, Black Water, Gray Water, Battery |
| Controls | Water Pump, Electric Water Heater, Gas Water Heater |
| Mostra | LED indicators for tank levels and battery status, Fault (FLT) indicator |
| Dimensions | Approx. 5 inches (width) x 4.25 inches (height) x 2.25 inches (depth, including wiring) |
| Origen | Fabricat als EUA |
Garantia
RecPro products are typically covered by a manufacturer's warranty. For specific warranty details, including duration and coverage, please refer to the documentation included with your purchase or contact RecPro customer support directly.
Suport
For technical assistance, troubleshooting, or parts inquiries regarding your RecPro RV Tank Sensor Monitor Panel (Model RP-2310), please contact RecPro customer service. Contact information can usually be found on the RecPro weblloc or on your purchase receipt.