1. Introducció
This manual provides essential information for the safe and efficient operation of your Sennheiser EW-D CI1 Wireless Guitar System (Q1-Q6). Please read this manual thoroughly before using the product to ensure proper setup, operation, and maintenance. Keep this manual for future reference.
2. Informació de seguretat
- Always follow the safety instructions provided in this manual and on the product itself.
- Do not expose the system to extreme temperatures, humidity, or direct sunlight.
- Avoid dropping or subjecting the components to strong impacts.
- Use only the power adapter and USB cable supplied with the system.
- Do not attempt to open or modify the components. Refer all servicing to qualified personnel.
- Keep the system away from water and other liquids.
3. Contingut del paquet
Verifiqueu que tots els elements siguin presents al vostre paquet:
- EW-D CI1 Wireless Receiver
- EW-D CI1 Wireless Transmitter
- Adaptador de corrent
- cable USB
- Maleta de transport
An image showing the main components of the Sennheiser EW-D CI1 Wireless Guitar System, including the receiver, transmitter, and accessories.
4. Configuració
4.1 Connexió del receptor
- Place the EW-D CI1 Wireless Receiver on a stable surface, ensuring good line-of-sight to the transmitter.
- Connect the supplied power adapter to the receiver's power input and then to a power outlet.
- Connect the receiver's audio output to your amplifier, mixer, or audio interface using an appropriate audio cable (not included).
4.2 Connexió del transmissor
- Ensure the EW-D CI1 Wireless Transmitter is charged. Use the USB cable to charge if necessary.
- Plug the transmitter directly into your guitar's output jack. Ensure it is securely connected.
4.3 Pairing the System
The EW-D CI1 system typically pairs automatically upon power-up. If pairing does not occur:
- Power on both the receiver and the transmitter.
- Refer to the receiver's display or indicator lights for pairing status.
- If a manual pairing option is available (consult the quick guide for specific button presses), initiate pairing on both devices within a short timeframe.
5. Funcionament
5.1 Engegada/apagada
- To power on: Press and hold the power button on both the receiver and transmitter until the indicators light up.
- To power off: Press and hold the power button on both devices until the indicators turn off.
5.2 Ús bàsic
- Ensure both the transmitter and receiver are powered on and successfully paired.
- Ajusteu el volum del vostre amplifier or mixer as needed.
- Monitor the signal strength and battery indicators on the receiver and transmitter to ensure optimal performance.
Selecció de canals 5.3 (90 canals)
The system offers 90 channels for operation. In environments with potential interference, you may need to select a different operating channel:
- Access the channel selection menu on the receiver (refer to the quick guide for navigation).
- Scan for available frequencies or manually select a channel.
- Ensure the transmitter automatically syncs to the new channel, or manually set it if required.
6. Manteniment
- Neteja: Use a soft, dry cloth to clean the surfaces of the receiver and transmitter. Do not use liquid cleaners or solvents.
- Cura de la bateria: For battery-powered components, ensure regular charging. If storing for extended periods, charge the battery to approximately 50% to prolong its lifespan.
- Emmagatzematge: Store the system in its carrying case in a cool, dry place when not in use.
7. Solució De Problemes
| Problema | Causa possible | Solució |
|---|---|---|
| No hi ha so del sistema. | Transmitter or receiver not powered on; not paired; volume too low; incorrect cable connection. | Ensure both devices are on and paired. Check all cable connections. Increase volume on amplificador/mesclador. |
| Interference or dropouts. | Other wireless devices nearby; too far from receiver; obstacles blocking signal. | Change operating channel. Reduce distance between transmitter and receiver. Ensure clear line-of-sight. |
| Transmitter not charging. | Faulty USB cable or power source; dirty charging port. | Try a different USB cable or power adapter. Clean the charging port carefully. |
If you encounter issues not listed here, or if the problem persists, please contact Sennheiser customer support.
8. Especificacions
- Marca: Sennheiser
- Model: EW-D CI1
- Tecnologia de connectivitat: Sense fil
- Tipus de connector: USB (for charging/data)
- Dispositius compatibles: Guitarra
- Pes de l'article: 6 Pounds (approximate total package weight)
- Material del tancament: Metall
- Nombre de canals: 90
- Font d'alimentació: Battery Powered (transmitter), Power adapter (receiver)
- Dimensions de l'article (L x A x A): 15.94 x 13.78 x 2.87 polzades (dimensions del paquet)
- Número de peça del fabricant: 508730 cr
- UPC: 657768463013
9. Garantia
This Sennheiser EW-D CI1 Wireless Guitar System (Q1-Q6) comes with a Garantia limitada de 90 diesSi us plau, conserveu el comprovant de compra per a reclamacions de garantia. La garantia cobreix els defectes de materials i fabricació en condicions d'ús normal. No cobreix els danys causats per mal ús, accidents, modificacions no autoritzades o desgast normal.
10. Suport
For technical assistance, troubleshooting, or warranty inquiries, please visit the official Sennheiser website or contact their customer support directly. You may need to provide your product model number (EW-D CI1) and serial number (if applicable) when seeking support.
