Jnaurb 100ft Purple LED Rope Lights Instruction Manual

1. Informació de seguretat

Si us plau, llegiu atentament totes les instruccions abans de la instal·lació i l'ús. Conserveu aquest manual per a futures consultes.

• Assegureu-vos que la font d'alimentació estigui desconnectada abans de la instal·lació o el manteniment.
• The plug part of the rope lights is no impermeable. Protect it from water exposure.
• Do not cut the rope lights. This will damage the product and void the warranty.
• Avoid sharp bends or excessive pulling on the rope lights to prevent damage to the internal wiring.
• Use only the provided screws and clamps per al muntatge.
• Mantenir fora de l'abast dels nens.

2. Configuració

2.1 Desembalatge i inspecció inicial

Carefully remove the LED rope lights from the packaging. Inspect the entire length of the rope light for any visible damage. The lights come pre-wound on a reel for easy deployment and storage.

Figure 1: Jnaurb 100ft Purple LED Rope Lights coiled on a reel.

2.2 Connecting Multiple Sets

These rope lights are designed for end-to-end connection. You can connect up to 3 sets for a total length of 300ft. To connect, ensure both ends are free of power. Remove the end cap from one set and the protective cover from the other. Align the connectors and twist to secure. Ensure a tight connection to maintain waterproof integrity (for the connection point).

Figure 2: Illustration of connecting multiple rope light sets. The power socket is inserted into the lamp band and fixed by rotating the fastener.

2.3 Mounting the Rope Lights

The package includes screws and clamps for fixing the LED rope lights. These can be used to hang the lights on ceilings, wrap around trees, pillars, or along fences. Plan your desired layout before securing the lights. Ensure the lights are securely fastened to prevent sagging or damage.

Figure 3: The clear PVC tube design of the rope lights, along with included screws and clamps per a la instal·lació.

2.4 Guia de vídeo d'instal·lació

3. Instruccions de funcionament

3.1 Engegada/apagada

Plug the rope lights into a standard 120V AC power outlet. The lights will illuminate in the last selected mode due to the memory function.

3.2 Canvi dels modes d'il·luminació

The rope lights feature 8 different lighting modes. To cycle through the modes, press the button located on the power plug. The available modes are:

1. Combinació
2. En onades
3. Seqüencial
4. Slo-glo
5. Chasing/Flash
6. Esvaïment lent
7. Brillant/Flaix
8. Encès constant

Figure 4: The 8 lighting modes and the integrated button on the plug for mode selection.

3.3 Auto Timer Function

The rope lights include an auto timer function. Once activated, the lights will remain ON for 6 hours and then automatically turn OFF for 18 hours. This cycle repeats daily. To activate the timer, press and hold the mode button until the lights flash, indicating the timer is set.

3.4 Funció de memòria

A built-in memory chip saves your last selected mode setting. When the lights are powered on again, they will resume the mode that was active before they were turned off.

4. Manteniment

4.1 Neteja

To clean the rope lights, ensure they are unplugged from the power source. Wipe the clear PVC tube with a soft, damp tela. No utilitzeu productes químics aggressivs ni netejadors abrasius.

4.2 Emmagatzematge

When not in use, carefully wind the rope lights back onto the provided reel. Store them in a cool, dry place away from direct sunlight and extreme temperatures. This helps prevent tangling and prolongs the lifespan of the lights.

4.3 Canvi de fusibles

The power plug contains two built-in fuses for short circuit protection. If the lights stop working, check the fuses. To replace, unplug the lights, open the fuse compartment on the plug, and replace with new fuses of the same rating. Refer to the plug for fuse specifications.

5. Solució De Problemes

• Els llums no s'encenen:
  • Ensure the power plug is securely inserted into a working outlet.
  • Check the fuses in the power plug and replace if blown.
  • Verify that the connection points between multiple sets are secure.
• Llums parpellejants o tènues:
  • Check for loose connections or damaged sections of the rope light.
  • Assegureu-vos que la font d'alimentació sigui estable.
• Modes not changing:
  • Premeu fermament el botó de mode.
  • Unplug and replug the lights to reset the controller.
• Danys per aigua:
  • The plug part is NOT waterproof. If exposed to water, disconnect power immediately and allow to dry completely before attempting to use again.

6. Especificacions

7. Garantia i assistència

7.1 Garantia del producte

This Jnaurb LED Rope Light product comes with a 6-month limited warranty from the date of purchase. This warranty covers manufacturing defects under normal use. It does not cover damage resulting from misuse, accidents, unauthorized modifications, or improper installation.

7.2 Atenció al client

For any questions, technical assistance, or warranty claims, please contact the seller directly through your purchase platform. Provide your order number and a detailed description of the issue for prompt support.