WALI Solar Fake Security Camera

1. Producte acabatview

The WALI DOW-SOL Solar Fake Security Camera is designed to provide a visual deterrent against potential intruders. This wireless dummy dome camera simulates the appearance and function of a real surveillance camera, featuring a flashing red LED light. It operates using dual power sources: an integrated solar panel for charging during daylight and two AA batteries (not included) for continuous operation, especially during nighttime or low-light conditions. Its weatherproof construction allows for both indoor and outdoor installation.

Figura 1: Frontal view of the WALI Solar Fake Security Camera.

2. Contingut del paquet

Si us plau, verifiqueu que tots els components siguin presents abans de continuar amb la instal·lació.

• 1 x WALI Dome Simulation Camera (White)
• 3 x cargols de muntatge
• 3 x Ancoratges de paret
• 1 x Warning Security Alert Sticker Decal
• Note: 2 pcs AA batteries are required and are NOT included.

Figure 2: Diagram showing the included components and product dimensions.

3. Configuració i instal·lació

Follow these steps for proper installation of your WALI Solar Fake Security Camera.

1. Prepara la càmera: Gently rotate the camera section to access the battery compartment.
2. Instal·leu les bateries: Insert two (2) AA batteries (not included) into the battery compartment, ensuring correct polarity. Close the compartment securely.
3. Seleccioneu la ubicació de muntatge: Choose a suitable location for installation. The camera can be mounted indoors or outdoors. For optimal solar charging, select a spot that receives direct sunlight for several hours daily.
4. Marca els punts de perforació: Hold the camera's mounting base against the desired surface and mark the positions for the three screw holes using a pencil.
5. Perforar forats pilot: Drill pilot holes at the marked points. If mounting on a masonry or concrete surface, insert the provided wall anchors into the pilot holes.
6. Muntar la càmera: Align the camera's mounting base with the drilled holes. Secure the camera to the wall or ceiling using the provided screws.
7. Ajust d'angle: Adjust the camera's angle to the desired position. The camera offers a ±90° tilt adjustment.
8. Apply Warning Sticker: Place the warning security alert sticker decal in a visible location near the dummy camera to enhance its deterrent effect.

Figure 3: Visual guide for battery insertion and mounting the camera.

Figure 4: Illustrates the adjustable tilt feature of the camera.

4. Funcionament

The WALI Solar Fake Security Camera is designed for simple, continuous operation.

• LED intermitent: Once batteries are installed, the red LED light on the front of the camera will begin to flash, simulating active surveillance.
• Energia solar: The integrated solar panel charges the installed AA batteries during daylight hours, extending battery life and ensuring continuous operation.
• Còpia de seguretat de la bateria: When solar power is insufficient (e.g., at night or on cloudy days), the camera automatically draws power from the AA batteries.
• Disseny impermeable: The camera's IP65 water-resistant rating ensures reliable performance in various weather conditions, including rain and sun exposure.

Figure 5: Depicts the dual power operation (solar and battery).

Figure 6: Close-up of the flashing red LED light, enhancing realism.

5. Manteniment

To ensure optimal performance and longevity of your dummy camera, follow these simple maintenance guidelines:

• Panell solar net: Netegeu periòdicament el panell solar amb un drap suau iamp drap per eliminar la pols, la brutícia o les restes que puguin obstruir la llum solar i reduir l'eficiència de la càrrega.
• Comproveu les bateries: Although solar-powered, it is recommended to check the AA batteries every 6-12 months, especially if the flashing LED appears dim or stops working. Replace with fresh batteries if needed.
• Inspeccionar el muntatge: Occasionally check that the camera is securely mounted and that screws are tight.
• Exterior net: Wipe the camera's exterior with a soft, dry cloth to keep it clean. Avoid using harsh chemicals or abrasive cleaners.

6. Solució De Problemes

7. Especificacions

8. Garantia i assistència

Garantia del fabricant: This WALI product comes with a 12-month warranty from the date of purchase, covering defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims.

Atenció al client: For any questions, assistance with installation, or troubleshooting, please contact WALI customer support. Experienced and friendly US-based customer support is available to assist 7 days a week.

For more information, visit the official WALI weblloc web o consulteu la documentació de compra per obtenir les dades de contacte.