1. Introducció
This manual provides essential information for the safe and efficient use of your Brother CE1150 Computerized Sewing Machine. Please read all instructions carefully before operating the machine to ensure proper setup, operation, and maintenance. Keep this manual in a safe place for future reference.
Figura 1: Frontal view of the Brother CE1150 Computerized Sewing Machine.
2. Configuració
2.1 Desembalatge i col·locació
- Traieu amb cura la màquina del seu embalatge.
- Place the machine on a stable, level surface. Ensure adequate space around the machine for comfortable operation.
2.2 Connexió d'alimentació
- Connecteu el cable d'alimentació a la màquina i després a una presa de corrent adequada.
- Ensure the power switch is in the 'OFF' position before connecting.
2.3 Enrotllament de la bobina
- Col·loqueu una bobina de fil al portacarret.
- Follow the winding path indicated on the machine for bobbin winding.
- Place an empty bobbin onto the bobbin winder shaft and push it to the right.
- Start the machine to wind the bobbin. Stop when the bobbin is full.
2.4 Enfilat superior
- Aixequeu la palanca del peu premsador.
- Follow the numbered threading path on the machine, ensuring the thread is correctly seated in all guides and the take-up lever.
- Feu servir l'enfilador d'agulles automàtic per enfilar l'agulla fàcilment.
2.5 Drop-in Top Bobbin Installation
- Obriu la placa de la coberta de la bobina.
- Insert the wound bobbin into the bobbin case with the thread unwinding in the correct direction (usually counter-clockwise).
- Guide the thread through the tension slot and pull out a few inches of thread.
- Substituïu la placa de coberta de la bobina.
Figura 2: superior view illustrating thread spool placement and bobbin area.
3. Instruccions de funcionament
3.1 Panell de control i pantalla LCD
- The LCD display shows the selected stitch number, recommended presser foot, and stitch length/width settings.
- Use the stitch selector buttons to navigate through the 110 unique built-in stitches and 8 styles of 1-step auto-size buttonholes.
- Adjust stitch length and width using the dedicated buttons as needed for your project.
Figura 3: Detallada view of the LCD display and stitch selection chart.
3.2 Sewing Speed Control
- The machine features a pre-set speed control allowing you to set a maximum sewing speed of up to 410 stitches per minute (spm).
- Adjust the speed slider for precise control, especially for intricate work or for beginners.
3.3 Changing Presser Feet
- Ensure the needle is in its highest position and the power is off.
- Press the black button on the back of the presser foot holder to release the current foot.
- Align the new presser foot with the holder and lower the presser foot lever until it snaps into place.
- The machine includes 7 sewing feet: buttonhole, zipper, button sewing, overcasting, blindstitch, monogramming, and zigzag feet.
3.4 Ús del braç lliure
- Remove the accessory storage compartment to expose the free arm.
- The smaller free arm is ideal for sewing cylindrical items such as cuffs, sleeves, and pant hems.
Figure 4: The free arm feature for sewing small, circular items.
3.5 LED Workspace Lighting
- The super-bright LED-lit workspace provides clear visibility for all your sewing projects.
4. Manteniment
4.1 Neteja de la màquina
- Regularly clean lint and dust from the bobbin case area and feed dogs using the brush provided or a small, soft brush.
- Assegureu-vos que la màquina estigui desconnectada abans de netejar-la.
4.2 Substitució de l'agulla
- Replace the needle frequently, especially when sewing different fabric types or if the needle becomes bent or dull.
- Use the screwdriver to loosen the needle clamp screw, remove the old needle, insert a new one with the flat side facing the back, and tighten the screw.
5. Solució De Problemes
Si teniu problemes amb la vostra màquina de cosir, consulteu els següents problemes i solucions habituals:
| Problema | Causa possible | Solució |
|---|---|---|
| Punts saltats | Agulla incorrecta, agulla doblegada, enfilat incorrecte. | Replace needle with correct type/size, re-thread machine, ensure needle is fully inserted. |
| Trenca fil | Incorrect tension, poor quality thread, needle bent or dull, improper threading. | Adjust tension, use good quality thread, replace needle, re-thread machine. |
| Punts desiguals | Incorrect tension, improper bobbin winding, fabric not feeding smoothly. | Adjust tension, re-wind bobbin, ensure presser foot pressure is appropriate for fabric. |
For more detailed troubleshooting, please refer to the comprehensive guide available on the Brother support weblloc.
6. Especificacions
- Model: CE1150
- Puntades: 110 unique built-in sewing stitches
- Ojales: 8 styles of 1-step auto-size buttonholes
- Velocitat de costura: Up to 410 stitches per minute (spm)
- Visualització: Pantalla LCD
- Espai de treball: Super-bright LED-lit
- Enfilador d'agulles: Advanced automatic needle threader
- Bobina: Jam-resistant drop-in top bobbin
- Included Feet: 7 sewing feet (buttonhole, zipper, button sewing, overcasting, blindstitch, monogramming, zigzag)
- Dimensions: 19.2 x 10.6 x 15.8 polzades
- Pes de l'article: 13.75 lliures
- Fabricant: Brother Sewing
7. Garantia i Suport
7.1 Informació de la garantia
This Brother CE1150 Computerized Sewing Machine is a renewed product backed by a 1-year warranty. Please retain your proof of purchase for warranty claims.
7.2 Atenció al client
For further assistance, technical support, or to inquire about service, please visit the official Brother support weblloc web o poseu-vos en contacte amb el seu departament d'atenció al client. Normalment, podeu trobar la informació de contacte al fabricant weblloc web o a l'embalatge original del producte.