UltraPro 700 Series Z-Wave In-Wall Smart Rocker Light Dimmer (Model 59372) Instruction Manual

Introducció

Welcome to the UltraPro 700 Series Z-Wave In-Wall Smart Rocker Light Dimmer. This device offers advanced home automation features, allowing you to control and schedule lighting wirelessly when paired with a compatible Z-Wave hub. It integrates QuickFit and SimpleWire technologies for easier installation and enhanced reliability.

Les característiques clau inclouen:

• Disseny d'ajust ràpid: Reduced housing depth and no heat tabs for easier installation in crowded switch boxes.
• Tecnologia SimpleWire: Auto-detecting line/load terminals and dual ground ports for simplified wiring.
• Z-Wave Plus and 700 Series: Enhanced security (S2) and simplified pairing (SmartStart) with backward compatibility.
• Control de veu: Compatible with Amazon Alexa and Google Assistant via a Z-Wave hub.
• Full-Range Dimming: Works with dimmable LED, CFL, and incandescent bulbs.
• 3-Way Ready: Supports multi-switch configurations (up to five locations with add-on switches).

Informació de seguretat

ADVERTÈNCIA: RISC DE XOC

• Turn OFF power to the circuit breaker or fuse box before installation.
• All wiring connections must be made with the power OFF to avoid personal injury and/or damage to the dimmer.
• Aquest dispositiu està dissenyat per a la instal·lació d'acord amb el Codi elèctric nacional i les normatives locals.
• Si no esteu segur de qualsevol part d’aquestes instruccions, consulteu un electricista qualificat.
• Do not use with non-dimmable bulbs.
• Només per a ús interior.

Instal·lació

Wiring Diagram and Physical Installation

The UltraPro 700 Series dimmer features QuickFit and SimpleWire technologies for streamlined installation.

QuickFit Design

The QuickFit design reduces the housing depth by up to 20% and eliminates the need for heat tabs, making it suitable for older-style switch boxes or multi-gang configurations with limited space.

Image: Illustration of the QuickFit design, highlighting the reduced housing depth and absence of break-off tabs for easier installation in tight spaces.

SimpleWire Technology

SimpleWire technology includes patented auto-detecting line/load terminals, which automatically identify the line and load wires, simplifying the wiring process. Dual, offset ground ports support daisy-chaining in multi-switch setups.

Image: Detailed wiring diagram illustrating SimpleWire technology with labeled connections for Ground, Line/Load, Traveler (optional for 3-way), and Neutral. Note the dual, offset ground ports.

Wiring Steps (General)

1. Apagueu l'alimentació: Locate the circuit breaker or fuse that supplies power to the switch box and turn it OFF. Verify power is off using a voltage provador.
2. Treure l'interruptor antic: Carefully remove the existing switch from the wall box.
3. Identifica els cables:
   • Línia (directa): Carries power from the circuit breaker.
   • Càrrega: Carries power to the light fixture.
   • Neutre: Provides a return path for current (required for this dimmer).
   • Terra: Fil de seguretat.
   • Traveler (for 3-way/multi-switch): Connects to an add-on switch.
4. Connecteu els cables: Connect the wires to the UltraPro dimmer terminals as shown in the SimpleWire diagram. The dimmer's auto-detecting terminals will identify Line/Load.
5. Secure dimmer: Mount the dimmer into the wall box using the provided screws.
6. Install wallplate: Attach the wallplate (sold separately).
7. Restaurar l'energia: Torneu a encendre l'alimentació a l'interruptor.

For 3-way or multi-switch installations, an UltraPro add-on switch (sold separately) is required. The dimmer supports control from up to five locations.

Image: Diagram showing both single switch and multi-switch configurations. The multi-switch setup illustrates controlling lighting from up to five locations using an UltraPro add-on switch.

Setup (Z-Wave Pairing)

Pairing with a Z-Wave Hub

This UltraPro dimmer utilizes Z-Wave Plus and 700 Series technology, offering enhanced security (S2) and simplified pairing (SmartStart).

Inclusió SmartStart

SmartStart-enabled products can be added to a Z-Wave network by scanning the Z-Wave QR Code present on the product or packaging with a controller providing SmartStart inclusion. No further action is required, and the SmartStart product will be added automatically within 10 minutes of being switched on in the network vicinity.

Image: Close-up of the dimmer showing the SmartStart QR code and Device Specific Key (DSK) for easy, secure pairing, along with a note about S2 Security for 128-bit encryption.

Manual Inclusion (Non-SmartStart)

1. Place your Z-Wave controller into inclusion (pairing) mode.
2. Press the top or bottom of the rocker switch once.
3. The LED indicator on the dimmer will flash to confirm inclusion.
4. If successful, the dimmer will appear on your Z-Wave controller's device list.

Exclusion (Removing from Z-Wave Network)

1. Place your Z-Wave controller into exclusion (removal) mode.
2. Press the top or bottom of the rocker switch once.
3. The LED indicator will flash to confirm exclusion.

Integració de control de veu

Once paired with a compatible Z-Wave hub (e.g., SmartThings, Ring, Wink, HomeSeer, Vera) that supports Amazon Alexa or Google Assistant, you can control your lights using voice commands.

Image: An Amazon Echo Dot device with logos for "works with alexa" and "works with Google Home," indicating voice control capabilities when connected through a compatible Z-Wave hub.

Operating the Dimmer

Control manual

• Activar/desactivar: Press the top of the rocker to turn the light ON. Press the bottom of the rocker to turn the light OFF.
• Ajusta la brillantor: Press and hold the top of the rocker to increase brightness. Press and hold the bottom of the rocker to decrease brightness. Release when desired brightness is reached.

Control remot

Through your Z-Wave hub and associated app, you can:

• Remotely turn lights ON/OFF.
• Adjust dimming levels.
• Create schedules for automated lighting.
• Control from anywhere via smartphone, tablet, or PC (requires compatible gateway, sold separately).

Image: A hand holding a smartphone displaying a smart home app interface, with an outdoor house scene in the background, illustrating remote control capabilities.

Escenes personalitzades

Program groups of hardwired fixtures for specific scenarios, such as entertaining, events, or daily routines, through your Z-Wave hub's interface.

Image: A white smart dimmer switch installed on a wall in a modern living room setting, illustrating the concept of custom scenes for programmed lighting.

Manteniment

Netegeu el dimmer amb un suau, damp tela. No utilitzeu netejadors abrasius ni dissolvents.

Ensure the dimmer is not exposed to excessive moisture or extreme temperatures outside its operating range (32°F to 104°F).

Resolució de problemes

Problemes comuns i solucions

• La llum no s'encén/s'apaga:
  • Comproveu l’interruptor automàtic.
  • Verifiqueu que les connexions del cablejat siguin segures.
  • Ensure the bulb is dimmable and functioning.
• Dimmer does not respond to Z-Wave commands:
  • Ensure the dimmer is within range of your Z-Wave hub.
  • Try re-pairing the dimmer with your Z-Wave hub.
  • Check your Z-Wave hub's status and network.
• Difficulty connecting to SmartThings hub:
  • If standard instructions fail, consult the manufacturer's support or your hub's specific pairing guide. Sometimes, specific hub models require alternative pairing sequences.
• Slow response when turning off/on:
  • This can sometimes be a characteristic of certain Z-Wave dimmers or hub configurations. Ensure your Z-Wave network has good signal strength and minimal interference.
  • Check if your hub or dimmer settings allow adjustment of fade on/off times. Disabling dimming completely might remove fade effects if that is the cause.
• Dimmer does not dim properly:
  • Confirm the connected bulb is a dimmable type (LED, CFL, or incandescent).
  • Some dimmable LEDs require specific dimmer types or have a limited dimming range.

Especificacions

Dades tècniques

Garantia i Suport

Informació de la garantia

Specific warranty details are typically provided with the product packaging or on the manufacturer's website. Please refer to the documentation included with your purchase for warranty terms and conditions.

Atenció al client

For technical assistance, troubleshooting, or further information, please contact UltraPro customer support. Visit the official UltraPro weblloc web per obtenir dades de contacte i recursos de suport.

Fabricant: Jasco Products Company, LLC