FOGATTI InstaShower GO Pro Portable Propane Tankless Water Heater User Manual

Introducció

The FOGATTI InstaShower GO Pro is a compact and portable shower system designed for outdoor use. Heated by propane, it provides hot water in seconds for showering. It is lightweight and easy to store, making it an ideal companion for campexcursions, senderisme i altres aventures a l'aire lliure.

Característiques principals:

• Portable Shower System: Compact and portable, propane-heated for instant hot water. Ideal for campsenderisme i aventures a l'aire lliure.
• Easy Access to Hot Water: 22,000 BTU heating output, heats in 8 seconds, 0.9 GPM hot water output, max 125°F temperature rise.
• Enjoy Showers Anytime, Anywhere: Built-in 5000 mAh rechargeable battery (80 min operation), 12V DC charging. Initial 4-hour charge recommended.
• All-in-one Solution: Efficient brushless 12V pump with 6.6 ft hose, automatic ignition for water and energy saving.
• Multi-Protections for Added Safety: Overheat, flameout, tilt, and dry burn protection. Constructed with flame-retardant materials.
• Només per a ús exterior: Not for indoor installation or residential plumbing.

Què s'inclou

The FOGATTI InstaShower GO Pro comes complete with all the necessary components for immediate use:

• Portable Water Heater Unit
• 12V Cigarette Lighter Power Line
• Battery Charger (120V AC/60 Hz)
• Manual d'usuari
• Propane Adapter Hose (4 ft)
• Pet Shower Sprayer (7.2 ft)
• Pump Assemblies (12V brushless pump with 6.6 ft hose)
• Shower Head (with 9.8 ft shower hose)
• Base Magnètica
• Ganxo de dutxa

Configuració

Follow these steps to set up your FOGATTI InstaShower GO Pro:

1. Connecteu la bomba: Connect the pump assembly to the blue water inlet port on the water heater unit.
2. Connectar la mànega de la dutxa: Connect the shower hose to the red water outlet port on the water heater unit.
3. Connectar propà: Attach a 1lb propane cylinder directly to the rear of the unit, or use the provided adapter hose to connect to a larger propane tank. Ensure connections are tight.
4. Place Pump in Water Source: Submerge the pump into your desired water source (e.g., a bucket, lake, or stream).
5. Unitat de posició: Place the water heater unit on a stable, level surface.

Guia de vídeo de configuració:

This video provides a visual guide on the installation process of the FOGATTI InstaShower GO Pro, detailing how to connect the water pump, propane tank, and shower head for first-time use.

Instruccions de funcionament

Once set up, operating your InstaShower GO Pro is straightforward:

1. Encès: Press the power button on the unit's control panel to turn it on.
2. Activar la bomba: Press the pump button to start the water flow.
3. Ajustar la temperatura: Rotate the temperature control knob to achieve your desired water temperature (up to 125°F).
4. Pause Flow: Use the switch on the shower head to temporarily pause water flow, saving water and energy.

Guies de vídeo d'operació:

This video provides a step-by-step guide on how to operate the FOGATTI InstaShower GO Pro, covering connecting the water source, propane, and activating the heating and pump functions.

This video illustrates the water flow rate of the FOGATTI InstaShower GO Pro by demonstrating how quickly it can fill a 5-gallon barrel, providing an estimate of shower duration per gallon.

Manteniment

Specific maintenance instructions are not detailed in the provided product information. Generally, it is recommended to keep the unit clean and dry after each use. Store in a cool, dry place. Refer to the full user manual for any detailed maintenance procedures.

Resolució de problemes

If you encounter issues with your InstaShower GO Pro, consider the following:

• No Heat/Error Message: If the unit stops heating or displays an error, check for sufficient water flow and ensure the unit is not tilted. The flame will shut off if the tilt angle is too large or if it detects insufficient water flow.
• Sobreescalfament: The unit has overheat protection. If the water temperature exceeds 125°F, the fire will shut off to prevent burns and damage. Adjust the gas flow to prevent temperature spikes.
• Dry Burn Protection: If the water source runs out, the pump will stop to prevent damage to the heat exchanger or burner.
• Problemes de visualització: If the LED screen is unclear or shows black shadows, contact customer support.

Safety & Troubleshooting Video:

This video demonstrates the safety features of the FOGATTI InstaShower GO Pro, including overheat protection, dry burn protection, and tilt protection, which can help in troubleshooting common issues.

Especificacions

Garantia i Suport

The FOGATTI InstaShower GO Pro comes with a 12 mesos de garantia de qualitat. For any inquiries or assistance, Atenció al client 24/7 is available. The product is also Certificat CSA, ensuring it meets high safety and performance standards.